06-04-2019, 08:59 PM | #155 | |
Major General
2374
Rep 8,364
Posts |
Quote:
|
|
Appreciate
1
gspannu199.50 |
06-22-2019, 01:22 AM | #156 |
Brigadier General
6062
Rep 3,625
Posts |
just wanting to double check
i have had the CS EDC for quite a while and just had swifts springs installed. i read this thread saying that the edc has to 'recalibrated' to remove error codes as part of the install: https://f80.bimmerpost.com/forums/sh....php?t=1441217 would the dealer have returned by edc to stock after having the springs installed? just wondering if should have my friend or alex at alpine recheck my edc version?
__________________
2018 Porsche GT3 6MT 2021 M2C DCT Previous: Ferrari 458 | R35 GTR | F80 M3 | E46 M3 | E36 M3 | Scion FRS |
Appreciate
0
|
06-22-2019, 10:52 AM | #157 | |
Captain
1400
Rep 761
Posts |
Quote:
Your dealer *might* have recoded the VDC module, but there would be absolutely no reason for them to do so, and since it takes time I would be very surprised. |
|
Appreciate
1
Humdizzle6061.50 |
07-07-2019, 06:54 PM | #158 |
New Member
10
Rep 29
Posts |
hi all,
I have vo coded my f82 to the cs vdc/edc i am getting the "chassis function restricted" error on the dash and I think I need to calibrate my sensors. I started the test plan "EDC: Start up" but when i proceed with the plan it says the faults remain and faults needs to be fixed in order to calibrate. I am using ista+ 4.10.20 Any advice please? Thanks, Gee |
Appreciate
0
|
07-07-2019, 10:25 PM | #159 | |
Major General
2374
Rep 8,364
Posts |
Quote:
|
|
Appreciate
0
|
07-08-2019, 10:34 AM | #160 |
New Member
10
Rep 29
Posts |
|
Appreciate
0
|
07-14-2019, 05:25 PM | #161 | |
Lieutenant
150
Rep 511
Posts |
Quote:
Yeah, Al Maretto (aka "Robert McKenna" or whomever he actually is) posts a lot but he has no integrity! I paid him to do coding. He couldn't do it ("CS-EDC") properly. * He reneged on his word, * Charged me twice * Still did not resolve the issue and now, won't return my e-mails and/or contact attempts. So, all I have left is to post my reality on the forum. Maybe now, he'll contact me?!? Be Aware! It's all good as long as things are within his grasp.
__________________
///M Joy
|
|
Appreciate
0
|
08-12-2019, 03:55 AM | #163 |
Enlisted Member
24
Rep 49
Posts |
I just took a look at the FDL values for the VDC1 module for the M3CS versus M3 ZCP. The only parameters that seem to be changed are "Fahrzeugtyp" from _Comp to CS and under 3001 AUSSTATTUNGEN "M_Competition/High" from "aktiv (w=01)" to "nicht_aktiv (w=00").
So it looks like this can easily be FDL coded. Last edited by petrolhead.; 08-12-2019 at 04:03 AM.. |
Appreciate
1
Bubu889.00 |
08-12-2019, 04:00 AM | #164 |
Enlisted Member
24
Rep 49
Posts |
I also tried to find out if there is a difference in DSC coding between Competition and CS - since there was that comment on the German car magazine about improved ABS with the Cup 2 tires.
But I could not find a specific values for the CS: 3000_DSC_CODIERUNG at C_Variante_Fahrzeug_e it shows "F80_CP (w=03)" versus "F80 (w=00)" on the CS FA. I wonder if that's correct because it would mean there was no such thing as a CS specific coding for the DSC. Update: It appears to me the CS is using the DSC coding from the M4GTS (w=06). For the GTS appearently the RDCi functionality is disabled (C_Funktion_RDCi_I set to "nicht_aktiv"), something that can be ignored when coding the GTS DSC mapping. Last edited by petrolhead.; 08-14-2019 at 07:03 AM.. |
Appreciate
1
Bubu889.00 |
08-16-2019, 05:35 PM | #165 |
Enlisted Member
9
Rep 41
Posts |
thanks a lot for these inputs petrolhead.. I was lokking for these FDL values for quite a while. For the GTS DSC Coding its only this one value?
Do you have the GHAS (rear diff) values as well by any chance? thanks in advance and greetings from germany |
Appreciate
0
|
08-16-2019, 07:08 PM | #166 | |
BimmerPost Supporting Vendor
1788
Rep 3,055
Posts |
Quote:
For GHAS you can just change Typecode and VO code it.
__________________
Apple CarPlay Fullscreen for NBTEVO / ENTRYNAV2 / Anti-Dazzle F/G
CS FLASH G8X /GTS FLASH F8X / F8X Ultimate PACK / NBTEVO iDrive 6 FLASH iDrive Firmware Update + CarPlay Fullscreen -> Video Process Visit BIMMER-REMOTE.com - 10% OFF with BIMMERPOST_10 promocode info@bimmer-remote.com or PM |
|
Appreciate
0
|
08-17-2019, 03:30 PM | #167 | |
Enlisted Member
24
Rep 49
Posts |
Quote:
For the GHAS - if you don't want to use VO/FA coding, you can change the two parameters at: GHAS-> 3000 - Funktionen - DSS TASC to "F82GTS (w=0C)" and also DSS IPM to "F82GTS (w=0C)" and FDL code it. After you've coded these, you definitely need to clear all error codes. |
|
Appreciate
1
Bubu889.00 |
08-18-2019, 06:23 PM | #169 | |
General
21117
Rep 20,741
Posts
Drives: 2021 911 turbo
Join Date: Jan 2012
Location: Montreal
|
Quote:
__________________
Porsche 911 turbo 2021 992 GT Silver
Previous cars: M4cs 2019 F82 Limerock Grey / M4 2015 F82 Silverstone / M3 2008 E92 Silverstone / M3 2002 E46 Carbon Black |
|
Appreciate
0
|
12-03-2021, 07:31 AM | #171 |
New Member
3
Rep 8
Posts |
Hello colleagues, for edc m4 cs coding, is there still no way to have M4 CS option within vcm1? because it is not clear to me that it should be like f85_comp, I have tried it in my m4 cs limited edition version of Spain 60 units that is basically a pre m4 competition based on edc configuration and I like it more as stock I see that it goes better in cofort, sport and sport +
Thanks and greetings |
Appreciate
0
|
12-03-2021, 07:38 AM | #172 | |
BimmerPost Supporting Vendor
1788
Rep 3,055
Posts |
Quote:
__________________
Apple CarPlay Fullscreen for NBTEVO / ENTRYNAV2 / Anti-Dazzle F/G
CS FLASH G8X /GTS FLASH F8X / F8X Ultimate PACK / NBTEVO iDrive 6 FLASH iDrive Firmware Update + CarPlay Fullscreen -> Video Process Visit BIMMER-REMOTE.com - 10% OFF with BIMMERPOST_10 promocode info@bimmer-remote.com or PM |
|
Appreciate
0
|
09-10-2022, 11:47 AM | #175 |
BimmerPost Supporting Vendor
1788
Rep 3,055
Posts |
PM sent
__________________
Apple CarPlay Fullscreen for NBTEVO / ENTRYNAV2 / Anti-Dazzle F/G
CS FLASH G8X /GTS FLASH F8X / F8X Ultimate PACK / NBTEVO iDrive 6 FLASH iDrive Firmware Update + CarPlay Fullscreen -> Video Process Visit BIMMER-REMOTE.com - 10% OFF with BIMMERPOST_10 promocode info@bimmer-remote.com or PM |
Appreciate
0
|
09-10-2022, 09:08 PM | #176 |
First Lieutenant
168
Rep 319
Posts |
Got it. Thank you!
__________________
M4 Yas Marina Blue
F32 Estoril Blue |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|