Richland Forged RF-GT4: “Project Nürburg” Release

[richlandforged]

That application as photo'd is running the following setup:
255 35 r19 on 19x9.5ET26
275 35 r19 on 19x10.5ET35

Originally Posted by Morgen Black

On post #1 of this thread, you have a pic of a blue M3. What are the tire and wheel sizes if you happen to remember? Thank you.

MB

255 35 r19
275 35 r19

[Jwild90]

Originally Posted by MJ6

I did actually. Another member here JDE92M3 was running a similar set up with the same springs and wheels in 19x9.5 et20 and 19x11 et40 which are only 3mm and 2mm (respectively) off of the specs of the aggressive offset offering on the RF-GT4.

He was able to fit PS4S in 265/35 and 305/30 with great results and no rubbing, so I'm going to be heading the same route.

hey! did you ever went with this route?
19x9.5" et23 265/35/19
19x11" et38 305/30/19

if you did could you share some pictures? I'm thinking of going this route as well using ps4s

I will be lowered on mp has kit f82 m4 comp pack

also if anyone else has same spec setup would love to get some feedback!

thanks in advance!

[MJ6]

I'm still waiting on my wheels to come in, but even then I likely won't be mounting them until spring now.

JDE92M3 has a few good pictures as well as a great video that goes more in-depth with that exact set up.

[Jwild90]

Originally Posted by MJ6

I'm still waiting on my wheels to come in, but even then I likely won't be mounting them until spring now.

JDE92M3 has a few good pictures as well as a great video that goes more in-depth with that exact set up.

I'm going to install mp has kit first on stock 666m for now just collecting infos on fitments I like for future purchase.

I'll look forward to seeing your set up in near future!

[JagR2611]

Originally Posted by Jwild90

I'm going to install mp has kit first on stock 666m for now just collecting infos on fitments I like for future purchase.

I'll look forward to seeing your set up in near future!

I am in the same boat. Expecting to take delivery this month and am currently running the MP HAS kit with 666m + spacers.

Out of curiosity...

What size spacers are you targeting?

[Jwild90]

Originally Posted by JagR2611

I am in the same boat. Expecting to take delivery this month and am currently running the MP HAS kit with 666m + spacers.

Out of curiosity...

What size spacers are you targeting?

I've already got 12mm front and 10mm rear on the car

[JagR2611]

Originally Posted by RoadRunner///M

Did any you Richland Forged owners opt for Knurled Bead Seats?

I believe this is a relatively new offering. I ordered ~7 weeks ago and am expecting to take delivery soon. When I placed my order, this was not an option.

[Rockshaker]

As with everyone else, dealing with Lyle @ Richland throughout the entire process was an absolute pleasure. Thanks for the great buying experience!

I decided to go with the Brushed Clear 19" on my 2018 M3 lowered on MP HAS:

19x9.5" et23 265/35/19
19x11" et38 305/30/19

I just ordered so I won't know how they'll fit until the new year. Hopefully 2021 is better than 2020!

UPDATE

I received my wheels and had them ceramic coated and mounted. The rears fit with no issues but the front tires rub as I turn the wheel on the front and back of the fender liner.

I had to use a 10mm spacer (that's the smallest I had on hand) in the front because the tire was touching the front strut mount where the MP HAS spring starts.

I'm wondering how in the hell people are getting 275s to fit on front of an M3.

So I'm pondering solutions.

[JagR2611]

Originally Posted by Rockshaker

As with everyone else, dealing with Lyle @ Richland throughout the entire process was an absolute pleasure. Thanks for the great buying experience!

I decided to go with the Brushed Clear 19" on my 2018 M3 lowered on MP HAS:

19x9.5" et23 265/35/19
19x11" et38 305/30/19

I just ordered so I won't know how they'll fit until the new year. Hopefully 2021 is better than 2020!

Please share pictures after you install.

I ordered a different spec but am expecting to take delivery in ~2 weeks.

[Rockshaker]

Originally Posted by JagR2611

Please share pictures after you install.

I ordered a different spec but am expecting to take delivery in ~2 weeks.

I will, please do the same. I picked up the tires on Black Friday for $890! Now the waiting begins

[JagR2611]

Originally Posted by Rockshaker

I will, please do the same. I picked up the tires on Black Friday for $890! Now the waiting begins

Michelin Pilot Sport?

Is that your F80 in the garage? If so, it looks like we have the same color.

[Rockshaker]

Originally Posted by JagR2611

Michelin Pilot Sport?

Is that your F80 in the garage? If so, it looks like we have the same color.

Yes, MG 6MT. What color wheels did you go with?

[EricVR4]

After debating for 9 months on whether I wanted wheels or not, I finally pulled the trigger on some today:

Mineral White M3 ZCP
Satin Titanium finish
20x9.5 ET+22 front
20x10.5 ET+35 rear

I'm already anxious to get them on the car

[richlandforged]

Now with the following build options:

Knurled Bead Seats: An enhanced barrel friction modifier to eliminate tire slippage in high torque/braking scenarios.

"Clean Freak" Wheel Caps: Finish matched, gasket sealed, for those seeking minimalist, ultra-clean aesthetics.

[FreeDarko]

Originally Posted by richlandforged

[SIZE="4"]Now with the following build options:[/SIZE]

Knurled Bead Seats: An enhanced barrel friction modifier to eliminate tire slippage in high torque/braking scenarios.

"Clean Freak" Wheel Caps: Finish matched, gasket sealed, for those seeking minimalist, ultra-clean aesthetics.

You guys need to start considering forged sets for Tesla vehicles.

Limited options out there but lots of owners looking for affordable quality wheels.

[MJ6]

My wheel set arrived last weekend, and I just picked them up from my detailer after having them fully ceramic coated.

19x9.5 +22 and 19x11 +38
Brushed Tinted Dark

I can't say enough how utterly impressed I am by the quality of these wheels and the superb finish. Richland Forged and Lyle did a phenomenal job, and I can't wait until the weather gets a little nicer to mount them up!

[thkfast]

Originally Posted by Jbrown7403

Any pics out there of Sakhir Orange + Brushed Tinted Clear and / or Hyper Silver? F82 preferably but F80 in a pinch 😉

I too would like to see what color GT4 wheel looks good on Sakhir Orange!

Anyone?

[terahertz]

Originally Posted by Rockshaker

As with everyone else, dealing with Lyle @ Richland throughout the entire process was an absolute pleasure. Thanks for the great buying experience!

I decided to go with the Brushed Clear 19" on my 2018 M3 lowered on MP HAS:

19x9.5" et23 265/35/19
19x11" et38 305/30/19

I just ordered so I won't know how they'll fit until the new year. Hopefully 2021 is better than 2020!

Curious how the 305 will fit. I have been waiting for them to make a 19x11+44 rear, as 38 seems too aggressive.

[21Inked]

Originally Posted by terahertz

Curious how the 305 will fit. I have been waiting for them to make a 19x11+44 rear, as 38 seems too aggressive.

Originally Posted by terahertz

Curious how the 305 will fit. I have been waiting for them to make a 19x11+44 rear, as 38 seems too aggressive.

i have a 11x19 et 38 with a 295 30 19 ps4s rear and have a lot of room so i put 7mm spacer on.

for this season i Went with 305 30 19 ps4s and i think i will be fine.(remove spacer )

[Hotflare]

Im here for mounted photos!

[Rockshaker]

Update to my update

So I went to double check my install as the 10mm spacers up front was causing more rubbing. It turns out I have Smidgen amount of space between my PS4S an the strut mount. I don't have smidgen ruler so I can't give a precise measurement. I would say about 5 pieces of paper laying flat is about the size of it.

Well, since I removed the spacers I have only a slight rub when turning the wheel on the passenger side. So I'm going to try 3 mm spacers and a heat gun.



UPDATE

I received my wheels and had them ceramic coated and mounted. The rears fit with no issues but the front tires rub as I turn the wheel on the front and back of the fender liner.

I had to use a 10mm spacer (that's the smallest I had on hand) in the front because the tire was touching the front strut mount where the MP HAS spring starts.

I'm wondering how in the hell people are getting 275s to fit on front of an M3.

So I'm pondering solutions.

As with everyone else, dealing with Lyle @ Richland throughout the entire process was an absolute pleasure. Thanks for the great buying experience!

I decided to go with the Brushed Clear 19" on my 2018 M3 lowered on MP HAS:

19x9.5" et23 265/35/19
19x11" et38 305/30/19

I just ordered so I won't know how they'll fit until the new year. Hopefully 2021 is better than 2020!

UPDATE

I powder coated my Richland GT4s

[terahertz]

Originally Posted by Rockshaker

Update to my update

So I went to double check my install as the 10mm spacers up front was causing more rubbing. It turns out I have Smidgen amount of space between my PS4S an the strut mount. I don't have smidgen ruler so I can't give a precise measurement. I would say about 5 pieces of paper laying flat is about the size of it.

Well, since I removed the spacers I have only a slight rub when turning the wheel on the passenger side. So I'm going to try 3 mm spacers and a heat gun.



UPDATE

I received my wheels and had them ceramic coated and mounted. The rears fit with no issues but the front tires rub as I turn the wheel on the front and back of the fender liner.

I had to use a 10mm spacer (that's the smallest I had on hand) in the front because the tire was touching the front strut mount where the MP HAS spring starts.

I'm wondering how in the hell people are getting 275s to fit on front of an M3.

So I'm pondering solutions.

As with everyone else, dealing with Lyle @ Richland throughout the entire process was an absolute pleasure. Thanks for the great buying experience!

I decided to go with the Brushed Clear 19" on my 2018 M3 lowered on MP HAS:

19x9.5" et23 265/35/19
19x11" et38 305/30/19

I just ordered so I won't know how they'll fit until the new year. Hopefully 2021 is better than 2020!

That looks like it fits great in the rear! The ps4s isn't the widest running tire out there, so that kind of limits tire choices unfortunately.