Need a sound clip - stock dp, AA equal length mid pipe, remus exhaust

[JipperII]

Originally Posted by Pewtinn

I ran both EL AA and single to the Remus, on high-flow DP as well as catless. Amazing sounds for both setups and they bolt right on with no issues. You wont be disappointed

Thanks pewtinn. I already have the EL on there now, how much different do you think the sound will be swapping to the remus?

I have the burbles tuned out completely

[rosemont83]

Originally Posted by JipperII

Ha yup with tips too....if you end up pulling of and selling let me know

Actually, sending you a PM

[TopJimmy]

I knew I saw a vid before…

Stock cats
AA Single Mid
Remus Rear

You can cut to 2m50s for burbles off.

[JipperII]

Originally Posted by TopJimmy

I knew I saw a vid before…

Stock cats
AA Single Mid
Remus Rear

You can cut to 2m50s for burbles off.

Thanks again jimmy...wish she did a valves open with no burbles. This is such a hard one to decide on man. Some say the remus and the stock sound similar with the EL mid pipe, hard to say if it's worth nearly 4k to swap right?

[rosemont83]

Originally Posted by JipperII

Thanks again jimmy...wish she did a valves open with no burbles. This is such a hard one to decide on man. Some say the remus and the stock sound similar with the EL mid pipe, hard to say if it's worth nearly 4k to swap right?

They don't sound similar at all. I turned off my burbles, so if you want a sound clip, just PM me your number and I will send you one.

Stock DP, AA EL, Remus Muffler

[TopJimmy]

Originally Posted by JipperII

Thanks again jimmy...wish she did a valves open with no burbles. This is such a hard one to decide on man. Some say the remus and the stock sound similar with the EL mid pipe, hard to say if it's worth nearly 4k to swap right?

When she drives away at the end it's valves open and "technically" no burbles, because she's accelerating and would only burble taking her foot off the pedal (which she didn't). That's how you would sound with stock cats, AA single and Remus rear, valves open.

[Danlnyc88]

Originally Posted by JipperII

Thanks buddy, do you have the EL or single mid pipe? I tuned out the burbles to get a cleaner sound but I still get that single pop on shifts above 4500...

So safe to say you feel the 3400 was worth it?

Those tips are not worth the price. I had a set before I sold them and bought the 102mm straight cut ones.

They are way too dark. The pipes get black from driving mixed with the cf around it. Add a cf diffuser to it and it just looks gross. You spend all this money on the cf tips and you can't even see them.

Take a look at the photo. Can you see them?

[JipperII]

Originally Posted by Danlnyc88

Those tips are not worth the price. I had a set before I sold them and bought the 102mm straight cut ones.

They are way too dark. The pipes get black from driving mixed with the cf around it. Add a cf diffuser to it and it just looks gross. You spend all this money on the cf tips and you can't even see them.

Take a look at the photo. Can you see them?

yeah that kinda sucks, very hard to see for sure. They dont even come out as far as the stock ones do

[Danlnyc88]

Originally Posted by JipperII

yeah that kinda sucks, very hard to see for sure. They dont even come out as far as the stock ones do

You can adjust length. It's the color that was the problem for me.

[JipperII]

Originally Posted by Danlnyc88

You can adjust length. It's the color that was the problem for me.

What finish option do you think would be a better combo?

[Danlnyc88]

Originally Posted by JipperII

What finish option do you think would be a better combo?

Personally I love the polished look since my wheels are polished as well.

The one in the picture is 102mm straight cut pipes. It's their cheapest one but I think it looks the best too.

But it's either carbon, polished, or black. Not too many choices. I hate the black look so polished it is.

[JipperII]

Originally Posted by Danlnyc88

Personally I love the polished look since my wheels are polished as well.

The one in the picture is 102mm straight cut pipes. It's their cheapest one but I think it looks the best too.

But it's either carbon, polished, or black. Not too many choices. I hate the black look so polished it is.

Thanks I'll see if I can find some shots of it, my car is sahir orange with the extra carbon trim so the black would look sharp just not stand out too much I guess