01-01-2019, 07:21 PM | #1 |
Lost Motorcyclist
167
Rep 379
Posts |
MPSS 295/30/20 MO spec
Hi there,
Can someone please confirm for me that the MO spec MPSS has a narrow tread width? Tirerack specs lists them as being narrow compared to the non MO tyre but I currently have them on my car and they don't seem to be overly narrow or stretched looking on a 10.5 inch rear. Reason I ask is I'm looking at new rims and going to a 11 inch rear and if they are in fact narrow compared to say a OTS MP4S in a 295 that would help me stick with a 295 rear on the 11 inch wheel. Cheers, |
01-04-2019, 09:47 AM | #3 |
Captain
257
Rep 934
Posts |
MPS4S MO 295/30/20(96583):
Section width: 10.5" Tread width: 10.3" Overall diameter: 27" MPS4S 295/30/20 (06016): Section Width: 11.9" Tread Width: 11.1" Overall Diameter: 27" That being said, the non MO Spec tire would be wider and have less stretch. Hope that helps out
__________________
2015 BMW F82 M4
|
Appreciate
1
Rovie1.50 |
01-04-2019, 12:55 PM | #5 |
Brigadier General
2163
Rep 4,106
Posts |
__________________
|
Appreciate
0
|
01-04-2019, 06:10 PM | #6 | |
Lost Motorcyclist
167
Rep 379
Posts |
Quote:
Definitely going to the 4S, currently have the MPSS MO. difference being I'm going from a 10.5 to a 11 inch rear wheels. |
|
Appreciate
0
|
01-04-2019, 08:08 PM | #7 |
Captain
257
Rep 934
Posts |
All comes down to the fitment and offset ofnyour new wheels. But the non MO spec 295/30/20 should not be an issue for clearance!
__________________
2015 BMW F82 M4
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|