New MAD Product Release S55 Single MidPipe & Brace

Info@mad-us.com · 11-01-2021, 09:31 AM

For those PMing us asking for forum member discounts now is your Chance ! Black Friday sales are now up sitewide!

BeachieM3 · 11-02-2021, 12:03 AM

Quote:

Originally Posted by Info@mad-us.com

For those PMing us asking for forum member discounts now is your Chance ! Black Friday sales are now up sitewide!

Just bought one tonight. Can't wait to try it out!

damos · 11-02-2021, 05:37 AM

Quote:

Originally Posted by Info@mad-us.com

For those PMing us asking for forum member discounts now is your Chance ! Black Friday sales are now up sitewide!

Hi, do you have a distributor in Australia?

kwatkins12 · 11-02-2021, 05:52 AM

Quote:

Originally Posted by F82KPowers

Quote:

Originally Posted by Info@mad-us.com

Quote:

Originally Posted by Mike.

I may get the heat exchanger

I've been enjoying the MAD midpipe! Quick vid below. Nice product. I'm considering the heat exchanger too. Does the code work for that product as well by chance?

Edit: I looked back and see that post was from August lol

Do you have any other exhaust mods or just the midpipe?

TractionControlDelete · 11-02-2021, 03:20 PM

Quote:

Originally Posted by kwatkins12

Quote:

Originally Posted by F82KPowers

Quote:

Originally Posted by Info@mad-us.com

Quote:

Originally Posted by Mike.

I may get the heat exchanger

I've been enjoying the MAD midpipe! Quick vid below. Nice product. I'm considering the heat exchanger too. Does the code work for that product as well by chance?

Edit: I looked back and see that post was from August lol

Do you have any other exhaust mods or just the midpipe?

Just the midpipe. Drop in BMS filters too, if that counts

kwatkins12 · 11-02-2021, 03:32 PM

Quote:

Originally Posted by F82KPowers

Quote:

Originally Posted by kwatkins12

Quote:

Originally Posted by F82KPowers

Quote:

Originally Posted by Info@mad-us.com

Quote:

Originally Posted by Mike.

I may get the heat exchanger

I've been enjoying the MAD midpipe! Quick vid below. Nice product. I'm considering the heat exchanger too. Does the code work for that product as well by chance?

Edit: I looked back and see that post was from August lol

Do you have any other exhaust mods or just the midpipe?

Just the midpipe. Drop in BMS filters too, if that counts

Wow, I think this sold me on the mid pipe then. I have BMC filters so essentially identical.

TractionControlDelete · 11-02-2021, 04:23 PM

Quote:

Originally Posted by kwatkins12

Quote:

Originally Posted by F82KPowers

Quote:

Originally Posted by kwatkins12

Quote:

Originally Posted by F82KPowers

Quote:

Originally Posted by Info@mad-us.com

Quote:

Originally Posted by Mike.

I may get the heat exchanger

I've been enjoying the MAD midpipe! Quick vid below. Nice product. I'm considering the heat exchanger too. Does the code work for that product as well by chance?

Edit: I looked back and see that post was from August lol

Do you have any other exhaust mods or just the midpipe?

Just the midpipe. Drop in BMS filters too, if that counts

Wow, I think this sold me on the mid pipe then. I have BMC filters so essentially identical.

Correction… I have BMC filters just like you (I make the mistake of writing BMS all the time)

MR RIZK · 11-03-2021, 05:59 AM

Quote:

Originally Posted by Info@mad-us.com

For those PMing us asking for forum member discounts now is your Chance ! Black Friday sales are now up sitewide!

I assume there is no M2C version as didn't see it listed on your website?

Info@mad-us.com · 11-03-2021, 10:18 AM

Quote:

Originally Posted by MR RIZK

Quote:

Originally Posted by Info@mad-us.com

For those PMing us asking for forum member discounts now is your Chance ! Black Friday sales are now up sitewide!

I assume there is no M2C version as didn't see it listed on your website?

No m2c Version at this time sorry.

Info@mad-us.com · 11-03-2021, 10:43 AM

Quote:

Originally Posted by BeachieM3

Quote:

Originally Posted by Info@mad-us.com

For those PMing us asking for forum member discounts now is your Chance ! Black Friday sales are now up sitewide!

Just bought one tonight. Can't wait to try it out!

Awesome!

BeachieM3 · 11-13-2021, 09:29 PM

Quote:

Originally Posted by Info@mad-us.com

Quote:

Originally Posted by BeachieM3

Quote:

Originally Posted by Info@mad-us.com

For those PMing us asking for forum member discounts now is your Chance ! Black Friday sales are now up sitewide!

Just bought one tonight. Can't wait to try it out!

Awesome!

Got them on today! Pretty dramatic sound difference under load and deeper at idle. I have VRSF downpipes and drop-in filters with Bootmod3 Stage 2 93 multimap tune. May have to drop a gear lower on the highway when I want to quiet it down. Definitely more fumes but I expected that. I feel the extra horsepower and the faster revs. Quiets down nicely in efficient mode. Of course any pops and bangs are sharper and louder if you have those turned on.

A few things about the install:
1. No instructions so used AA pdf I found online.
2. Had to make cut 1 inch from weld not the 1.5 in the AA instructions.
3. One of the pipes was dented in but it was in the end and was able to be hammered out.
4. My AA exhaust tips are sticking out further now but that should be fine.

The price was right and they look and sound great. Looking forward to the next commute!

OtisF80M3 · 11-13-2021, 10:42 PM

I have VRSF downpipes as well. Did the midpipe make it sound more raspy? Also is the fumes really noticable now? Thinking about getting this midpipe soon.

BeachieM3 · 11-14-2021, 10:43 PM

Quote:

Originally Posted by OtisF80M3

I have VRSF downpipes as well. Did the midpipe make it sound more raspy? Also is the fumes really noticable now? Thinking about getting this midpipe soon.

I haven't driven it enough yet to know for sure, but I had a good impression on the drive home. If it's raspy then it's a mean and racy sound
that really sounded good when we revved it just after the install. I mainly don't want a tin can sound and I think you get that with some of the expensive and light mufflers. I'm keeping the heavy stock muffler. I've read people who have had no or little noticeable fumes. but I don't see how that's possible when removing all cats. Did install new gaskets at the downpipe connection to the midpipe. Not sure how livable it is yet. I'm planning to get a truck as a daily eventually and keep stepping up the aggression on the F80 but we'll see.

Info@mad-us.com · 11-16-2021, 08:15 PM

Quote:

Originally Posted by BeachieM3

I haven't driven it enough yet to know for sure, but I had a good impression on the drive home. If it's raspy then it's a mean and racy sound
that really sounded good when we revved it just after the install. I mainly don't want a tin can sound and I think you get that with some of the expensive and light mufflers. I'm keeping the heavy stock muffler. I've read people who have had no or little noticeable fumes. but I don't see how that's possible when removing all cats. Did install new gaskets at the downpipe connection to the midpipe. Not sure how livable it is yet. I'm planning to get a truck as a daily eventually and keep stepping up the aggression on the F80 but we'll see.

Thanks for the Photos and the Review.

BeachieM3 · 11-18-2021, 08:40 PM

Quote:

Originally Posted by Info@mad-us.com

Quote:

Originally Posted by BeachieM3

I haven't driven it enough yet to know for sure, but I had a good impression on the drive home. If it's raspy then it's a mean and racy sound
that really sounded good when we revved it just after the install. I mainly don't want a tin can sound and I think you get that with some of the expensive and light mufflers. I'm keeping the heavy stock muffler. I've read people who have had no or little noticeable fumes. but I don't see how that's possible when removing all cats. Did install new gaskets at the downpipe connection to the midpipe. Not sure how livable it is yet. I'm planning to get a truck as a daily eventually and keep stepping up the aggression on the F80 but we'll see.

Thanks for the Photos and the Review.

I've had time to experience the midpipe now and like my new setup. Pops and bangs were too much for downtown driving so I turned off burbles 100% in Bootmod3 and I'm really liking the smoother sound but the downshifts (DCT on setting 3) sound really mean now and I can hear the turbo spooling better. Definitely fumes but I think going to efficient mode at stop lights helps a bit. I can feel the exhaust through the accelerator more and it's definitely a more racy sound and feel.

Info@mad-us.com · 11-20-2021, 09:26 AM

Quote:

Originally Posted by BeachieM3

I've had time to experience the midpipe now and like my new setup. Pops and bangs were too much for downtown driving so I turned off burbles 100% in Bootmod3 and I'm really liking the smoother sound but the downshifts (DCT on setting 3) sound really mean now and I can hear the turbo spooling better. Definitely fumes but I think going to efficient mode at stop lights helps a bit. I can feel the exhaust through the accelerator more and it's definitely a more racy sound and feel.

Sounds like you are enjoying it

bigpaulkendall · 11-21-2021, 05:32 PM

I finally got mine installed, I followed some guy on YouTube instructions and cut 1.5 inches. I definitely think for this exhaust 1 inch cut would be better, took me forever to get everything lined up. Sounded good but I have not gotten to drive it much.

Info@mad-us.com · 11-25-2021, 08:19 AM

Quote:

Originally Posted by bigpaulkendall

I finally got mine installed, I followed some guy on YouTube instructions and cut 1.5 inches. I definitely think for this exhaust 1 inch cut would be better, took me forever to get everything lined up. Sounded good but I have not gotten to drive it much.

Thank you for the info. Hope you get to put few more miles on it soon.

cliffordm4 · 11-29-2021, 12:09 PM

Hey Info@mad-us.com you guys told me that the midpipes were in stock, so I ordered one and then 12 hours later they magically went out of stock. Was really hoping to get one before 12/18. Can you help?

Info@mad-us.com · 11-29-2021, 08:04 PM

Quote:

Originally Posted by cornfedSUV

Hey Info@mad-us.com you guys told me that the midpipes were in stock, so I ordered one and then 12 hours later they magically went out of stock. Was really hoping to get one before 12/18. Can you help?

You have Pm.

bigpaulkendall · 11-30-2021, 02:03 PM

Reporting back after putting some miles on the midpipe and I love it. I have the stock exhaust and in comfort/efficient mode it is nearly silent. There was 0 drone on my 30 minute commute to work. With the valves open the sound is there and there is slight drone, but not annoying. I have a few in car videos I'll upload when I get a chance. Overall I think this exhaust is a good choice. I don't mind the smell of 0 cats, the burbles are too much now though and I'll have to turn them down or shorten the length of the burble. Hopefully this made some sense as I feel like I started rambling.

Pworld10 · 11-30-2021, 03:14 PM

Ordered. Look forward to mines
Coming in the next batch. Whenever that is.

11-01-2021, 09:31 AM	#45
Info@mad-us.com BimmerPost Supporting Vendor 1900 Rep 4,900 Posts Drives: bmw Join Date: Mar 2021 Location: Mad-us.com iTrader: (0)	For those PMing us asking for forum member discounts now is your Chance ! Black Friday sales are now up sitewide! __________________ - Click Here Performance Parts For Your Bmw At Crazy Low Prices! Email: info@mad-us.com Last edited by Info@mad-us.com; 11-01-2021 at 08:08 PM..
	Appreciate 3 TractionControlDelete4587.00 BeachieM381.00 spidy512491.50 Quote

11-13-2021, 10:42 PM	#56
OtisF80M3 Private First Class 71 Rep 176 Posts Drives: F80 M3 Join Date: Jan 2018 Location: Kansas city iTrader: (0)	I have VRSF downpipes as well. Did the midpipe make it sound more raspy? Also is the fumes really noticable now? Thinking about getting this midpipe soon.
	Appreciate 0 Quote

11-21-2021, 05:32 PM	#61
bigpaulkendall New Member 18 Rep 29 Posts Drives: 135i, x535d, RRS, M3, x7 Join Date: Apr 2011 Location: Nebraska iTrader: (1)	I finally got mine installed, I followed some guy on YouTube instructions and cut 1.5 inches. I definitely think for this exhaust 1 inch cut would be better, took me forever to get everything lined up. Sounded good but I have not gotten to drive it much.
	Appreciate 2 OtisF80M370.50 spidy512491.50 Quote

11-29-2021, 12:09 PM	#63
cliffordm4 Private First Class 39 Rep 119 Posts Drives: 2018 M4 ZCP Imola Red 6MT Join Date: Mar 2021 Location: California iTrader: (0)	Hey Info@mad-us.com you guys told me that the midpipes were in stock, so I ordered one and then 12 hours later they magically went out of stock. Was really hoping to get one before 12/18. Can you help?
	Appreciate 0 Quote

11-30-2021, 02:03 PM	#65
bigpaulkendall New Member 18 Rep 29 Posts Drives: 135i, x535d, RRS, M3, x7 Join Date: Apr 2011 Location: Nebraska iTrader: (1)	Reporting back after putting some miles on the midpipe and I love it. I have the stock exhaust and in comfort/efficient mode it is nearly silent. There was 0 drone on my 30 minute commute to work. With the valves open the sound is there and there is slight drone, but not annoying. I have a few in car videos I'll upload when I get a chance. Overall I think this exhaust is a good choice. I don't mind the smell of 0 cats, the burbles are too much now though and I'll have to turn them down or shorten the length of the burble. Hopefully this made some sense as I feel like I started rambling.
	Appreciate 1 OtisF80M370.50 Quote

11-30-2021, 03:14 PM	#66
Pworld10 Enlisted Member 17 Rep 34 Posts Drives: 2016 F82 Join Date: Jun 2019 Location: CA iTrader: (1)	Ordered. Look forward to mines Coming in the next batch. Whenever that is.
	Appreciate 0 Quote