Help need with seat position on F83

[Djvolume]

So dealer updated my car with the latest software, no the from seat is not moving all the way back. If your seat is at the highest level it won't let to move it all the back as it used to, in order to do so you need to lower it down and only then it will move back, is there a way to code the seats for maximum distance to the back?

[Djvolume]

Anyone?

[Djvolume]

Bump

[Roch M4]

You need to code
SM (6d) MODULE (Driver seat position)
3000 EINAUSSTIEGSHILFE set to: Modus_FA_SLV if you want the seat to move backward when exiting the car

3012 EAH_VERFAHRWEG_SLV_PHYS werte = 00, 28 (default 00, 3C)
3012 EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS werte = 00, 3C (default 00, 64)

The werte "64" = 100mm and “28” = 40 mm of retraction, lower the number from 64 or convert the hex value entry to decrease the retraction.

[Djvolume]

Originally Posted by Roch M4

You need to code
SM (6d) MODULE (Driver seat position)
3000 EINAUSSTIEGSHILFE set to: Modus_FA_SLV if you want the seat to move backward when exiting the car

3012 EAH_VERFAHRWEG_SLV_PHYS werte = 00, 28 (default 00, 3C)
3012 EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS werte = 00, 3C (default 00, 64)

The werte "64" = 100mm and "28" = 40 mm of retraction, lower the number from 64 or convert the hex value entry to decrease the retraction.

Tried doesn't work