08-29-2021, 03:00 PM | #23 |
Lieutenant
245
Rep 466
Posts |
The Schawben thin wall will still stick on the side and your extension will come off first. Leaving the socket down in the hole. I used my grinder to take off maybe .3mm from the height, chamfered the top edge. After the adjustment it would come off. Alternative option is to use a stiff extension or some tape on the extension to make it tighter on the socket.
Plus I noticed two chunks of metal had broken off from the inside of the socket. Last edited by overlook637; 08-29-2021 at 04:21 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
diy, s55, socket, spark plug, spark plug change |
|
|