Australian Track Lap Times M4 & M2

[heyandrew1]

hey guys, can you share the cold tyre pressure when you go in track?

[Race82]

Originally Posted by heyandrew1

hey guys, can you share the cold tyre pressure when you go in track?

What tyres are you running?

If street tyres like PSS etc then max 34-36 hot, so start at 30-32 cold and bleed after a few laps and repeat between each session until stable.

If semi slicks like A050 or Z221, around 24-26 cold aiming for 28-30 hot.

Reason for the range is weather, track and how hard you drive.

[Race82]

Originally Posted by OzcarM3

31/05/2020
Wakefield Park
Natsoft
1:07.087
No change to set up.

Nice going man. Times keep dropping

Sorry for the delay everybody, will update all the new times in the list shortly...

Who’s loving being back on track

[Race82]

Originally Posted by bruce4030

How come nobody posts any times at SMSP or any NSW tracks?

I see lots of M2/M3/M4 at the Tracks, let’s post up those times and videos peeps!!

[heyandrew1]

Originally Posted by awbmw

What tyres are you running?

If street tyres like PSS etc then max 34-36 hot, so start at 30-32 cold and bleed after a few laps and repeat between each session until stable.

If semi slicks like A050 or Z221, around 24-26 cold aiming for 28-30 hot.

Reason for the range is weather, track and how hard you drive.

normally i'll put cup 2 or re-71r on


also i'll go to phillip island soon, i'll update the lap time asap. Last time i dont have gopro with me so i cant upload to youtube

[Race82]

Originally Posted by heyandrew1

normally i'll put cup 2 or re-71r on


also i'll go to phillip island soon, i'll update the lap time asap. Last time i dont have gopro with me so i cant upload to youtube

Awesome! Yeah I’d be starting at 28-30 and aiming for 32-34 hot but you will need to bleed after the first few sessions

[dannyz_M4]

Sandown 7th June 2020 - Tampered track day

Stock PSS's, RS29 Pads

1:23.894 NATSOFT

Cooked the tyres though ... started going off last few laps.

Hoping to get into 1:20s with PS2 when I get them next week.

[Race82]

Originally Posted by MFKN3

QLD raceway 57.1 sec. M3 though. Haven’t been in a couple years but will be going back this year..

Video or Natsoft date to confirm. Also note the specs of the car, check out Page 1 for details 👌

[Race82]

Originally Posted by worth1t

QLD Raceway - Sprint Circuit: 55.90 (natsoft 16/12/19)
QLD Raceway - Clubman Circuit: 58.54 (natsoft 9/1/20)
Morgan Park Raceway - K Circuit: 1:20.6

Thanks, great times will post them up. Pls confirm specs (tyres, tune, suspension etc) check page 1 for overview

[Race82]

Luddenham 49.3 on 29/05/20

[AUSf22]

Originally Posted by Race82

Luddenham 49.3 on 29/05/20

Great job! I drove that track a while back and one of the M4s did a 53.xx so 4 seconds off that is super quick especially for such a small track.

[Race82]

Originally Posted by AUSf22

Great job! I drove that track a while back and one of the M4s did a 53.xx so 4 seconds off that is super quick especially for such a small track.

Cheers, more in it with decent tyres and another crack at the Circut. I reckon a 48, maybe high 47 if the stars ⭐️ aligned 😂 anyway, fun little track, the faster you think you are the slower the lap. Smooth = fast especially applies here

[MFKN3]

Originally Posted by Race82

Video or Natsoft date to confirm. Also note the specs of the car, check out Page 1 for details 👌

E92 6MT, 4.4L S/C, BBK, KW CS, TD's, aero, no weight stripped. Natsoft, approx '17. Car been collecting dust since, but will be out again soon

[koastal]

Lakeside Park Qld
https://bmwcq.com.au/resources/Docum...Best%20Lap.pdf
F87
Time - 59.91
Tyres - Dunlop DZ03G
Susp - H & R lowering springs
Tune - Std
Brakes -ME20 F & Pagid 29 R

[Robbyjai]

Wakefield Park Raceway, 1:09.1, RobbyJai, M2C, DCT, CP, stock, 7/7/20 Natsoft


howdy just joined up to this.... i'll add my name to this list....

Can probrably crack 1:08's but its been 5 years since I been on the track.. so this is my first stint back after a 5 year hiatus and i was rather rusty.. .

Another M2C also there modified cracked 1:07.7... so im about 1.4 seconds behind a modded M2.. so not too bad

Natsoft Timings http://racing.natsoft.com.au/6383194...934.83b/View?1.

Video for evidence also

[BRMF82]

SMSP - GP - 13/10/2020 - M4 (PS4S, stage 1 BM3, stock suspension) - 1:48.67

Not much more in it 😂

[bloke79]

Been a bit cooped up here in Melbourne, so not much track activity until recently, but a couple more times for me.

Winton - 13/11/20 - M4 (A050's, stage 2 BM3 (low torque), BBK, stock suspension) - 1:36.8 -

Bathurst - 27/11/20 - M4 (A050's, stage 2 BM3 (low torque), BBK, stock suspension) - 2:31.4480

[dannyz_M4]

Originally Posted by bloke79

Been a bit cooped up here in Melbourne, so not much track activity until recently, but a couple more times for me.

Winton - 13/11/20 - M4 (A050's, stage 2 BM3 (low torque), BBK, stock suspension) - 1:36.8 -

Bathurst - 27/11/20 - M4 (A050's, stage 2 BM3 (low torque), BBK, stock suspension) - 2:31.4480

Nice Matt, love the vids!!
How is that extra power/tune on torque delivery and traction coming out of some of those corners? And are you on Dsc on, MDM or Dsc off?
Going sandown any time soon.?
D

[bloke79]

Tks!

Since the tune, MDM no longer works properly TBH, cuts power everywhere, so I've had to turn it all off. Never needed to switch out of MDM prior to that - so required a bit of throttle control, but once i got used to it, it was fine.

I run a 30% torque reduction in 1st/2nd, then 20% through all the other gears, so it's not actually making much more torque than stock, just a bit more power up top.

Re: Sandown - Nah - I think I'm going to be hard pressed to go much quicker than I've already gone there (1.20), but I'm going to PI on the 19th.

You got any days coming up?

Cheers,
matt

Originally Posted by dannyz_M4

Nice Matt, love the vids!!
How is that extra power/tune on torque delivery and traction coming out of some of those corners? And are you on Dsc on, MDM or Dsc off?
Going sandown any time soon.?
D

[dannyz_M4]

Originally Posted by bloke79

Tks!

Since the tune, MDM no longer works properly TBH, cuts power everywhere, so I've had to turn it all off. Never needed to switch out of MDM prior to that - so required a bit of throttle control, but once i got used to it, it was fine.

I run a 30% torque reduction in 1st/2nd, then 20% through all the other gears, so it's not actually making much more torque than stock, just a bit more power up top.

Re: Sandown - Nah - I think I'm going to be hard pressed to go much quicker than I've already gone there (1.20), but I'm going to PI on the 19th.

You got any days coming up?

Cheers,
matt

Awesome! I was wondering if full torque on the bm tune would be too much... torque reduction just for the track or all the time to save the cranky 😡 hub.? Sounds like a good idea though, power delivery would be awesome..

Yeah I have sandown again in the 28th of Dec. Once I get into the 1:20-1:21 I'll move on to the next track.... probably PI..
Who are you doing PI through.? Good luck!!

[bloke79]

Bit of both to be honest, I haven't tried it without the torque reductions though, so can't really compare it to anything other than stock.

Nice. Well - enjoy! PI - Doing it with MSCA.

Originally Posted by dannyz_M4

Awesome! I was wondering if full torque on the bm tune would be too much... torque reduction just for the track or all the time to save the cranky 😡 hub.? Sounds like a good idea though, power delivery would be awesome..

Yeah I have sandown again in the 28th of Dec. Once I get into the 1:20-1:21 I'll move on to the next track.... probably PI..
Who are you doing PI through.? Good luck!!

[RednekM2]

Winton June 2020

F22 M2 6 speed manual - Stock as a rock - 1:36.5300

http://racing.natsoft.com.au/6478056...6.74d/Result?8

Winton June 2019

E92 M3 6 speed manual - Stock as a rock - 1:38.8190 (timing says M2, but it was in the M3!)

http://racing.natsoft.com.au/6478056...1.74m/Result?1