Coding - Pay It Forward

shawnsheridan · 05-05-2017, 10:33 AM

Quote:

Originally Posted by stijnvdl

How long does it normally takes before you got a reply from Tokenmaster after requesting a token ?

Normally a couple days, but he is apparently on an extended absence. No telling when he returns.

shawnsheridan · 05-11-2017, 04:53 PM

Quote:

Originally Posted by MILK4YOU2C

Hey shawn can i please get new software

PM sent.

BlueTurtle · 05-12-2017, 02:40 AM

Shawn, can i get the latest link? Thanks!

shawnsheridan · 05-12-2017, 07:51 AM

Quote:

Originally Posted by BlueTurtle

Shawn, can i get the latest link? Thanks!

PM sent.

ciaranob · 05-13-2017, 04:58 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Hey Shawn - know you likely get a million PM's daily

but pinged you on something specific yesterday - if and when you get a chance to read could you let me know either way - much appreciated,
Cheers, C.

shawnsheridan · 05-13-2017, 06:10 PM

Quote:

Originally Posted by ciaranob

Hey Shawn - know you likely get a million PM's daily

but pinged you on something specific yesterday - if and when you get a chance to read could you let me know either way - much appreciated,
Cheers, C.

Done.

ciaranob · 05-13-2017, 09:46 PM

Quote:

Originally Posted by shawnsheridan

Done.

vsk2281 · 05-15-2017, 01:07 AM

Shawn, can i get the latest link to ? Thanks!

shin73 · 05-15-2017, 02:43 AM

Hello Shawn,

May I also get the latest links? Thanks!

shawnsheridan · 05-15-2017, 06:55 AM

Quote:

Originally Posted by vsk2281

Shawn, can i get the latest link to ? Thanks!

Quote:

Originally Posted by shin73

Hello Shawn,

May I also get the latest links? Thanks!

PM's sent.

shin73 · 05-15-2017, 12:07 PM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by vsk2281

Shawn, can i get the latest link to ? Thanks!

Quote:

Originally Posted by shin73

Hello Shawn,

May I also get the latest links? Thanks!

PM's sent.

MCamachoF80 · 05-17-2017, 08:13 PM

Hey Shawn, you're the man! Can I also get he latest link?

shawnsheridan · 05-17-2017, 08:14 PM

Quote:

Originally Posted by MCamachoF80

Hey Shawn, you're the man! Can I also get he latest link?

PM sent.

Kung Fu English · 05-20-2017, 01:35 PM

Sorry I can't figure any of this out. None of the guides are up to date. None of them make any sense.

I can connect to the car fine. I got esys working I think. But the esys instructions I got said to pick a path and generate a token upon running the launcher, neither of which are actual options. I found the freetoken.est but not sure it's working right.

When I connect and try to read the coding data, I get 4 errors, one on FEM_BODY which is like the main folder. Pic below.

I tried to code euro mdm, and got into "edit FDL" on the dsc folder, but I couldn't find any of the parameters listed in the op. Just a bunch of folders with numbers 3000+.

Then later it wouldn't get into it at all and gave me another error below.

Is there an updated step by step guide?

SmooveBe · 05-22-2017, 12:40 PM

Hey guys. My 2016 M3 MT arrived last friday and I'm ready to begin coding. I think the first step is to ask Shawn for the software.

Super cool doing that..

shawnsheridan · 05-22-2017, 01:27 PM

Quote:

Originally Posted by SmooveBe

Hey guys. My 2016 M3 MT arrived last friday and I'm ready to begin coding. I think the first step is to ask Shawn for the software.

Super cool doing that..

PM sent.

Hobbination · 05-25-2017, 12:55 AM

2018 lci LEDs, can they be coded to euro spec dazzle as well? Same procedure?

jollib · 06-13-2017, 03:43 PM

Hi Shawn is it possible to get the latest links as well.

shawnsheridan · 06-13-2017, 05:09 PM

Quote:

Originally Posted by jollib

Hi Shawn is it possible to get the latest links as well.

PM sent.

Doctor1973 · 06-13-2017, 11:21 PM

Hi,
with new LCI headlights how can I increase angel eyes brightness to 100%?
And then one touch blinker set to 5 is not working anymore with latest sw update. 61.05.
Can someone guide me?
THX

Almaretto · 06-22-2017, 09:55 PM

Quote:

Originally Posted by Doctor1973

Hi,
with new LCI headlights how can I increase angel eyes brightness to 100%?
And then one touch blinker set to 5 is not working anymore with latest sw update. 61.05.
Can someone guide me?
THX

With any headlamp, you can adjust Corona Rings; type of headlight/ECU's and associated coding is different. Traditionally, they are already at 100% as DRL's. Under various conditions (with low beams, as welcome lights, as follow-me-home lights, etc), you can adjust to your desired intensity. If you have LED's, check FLE or TMS, depending on vintage.

There is no fix, as far as I know, for adjusting soft turn signal blink number for newer firmwares.

drkeng · 06-23-2017, 12:35 AM

Shawn, could I get the latest links, please?

admittedly too lazy to read through whole thread.

can we code for antidazzle in USA? "undo the decoding" listed on the sticker

has anyone coded for the convertible top to operate at higher speeds than 9 mph? I believe it's significantly higher in Europe.

05-12-2017, 02:40 AM	#333
BlueTurtle Registered 0 Rep 2 Posts Drives: M4 Join Date: Sep 2016 Location: Seattle iTrader: (0)	Shawn, can i get the latest link? Thanks!
	Appreciate 0 Quote

05-15-2017, 01:07 AM	#338
vsk2281 Registered 0 Rep 1 Posts Drives: M3 F80 Join Date: May 2017 Location: Switzerland iTrader: (0)	Shawn, can i get the latest link to ? Thanks!
	Appreciate 0 Quote

05-15-2017, 02:43 AM	#339
shin73 New Member 18 Rep 27 Posts Drives: F82 M4 ZCP (2016) Join Date: Apr 2013 Location: Tokyo, Japan iTrader: (0)	Hello Shawn, May I also get the latest links? Thanks!
	Appreciate 0 Quote

05-17-2017, 08:13 PM	#342
MCamachoF80 Private First Class 46 Rep 144 Posts Drives: 2015 YMB M3 Join Date: Jul 2016 Location: North, NJ iTrader: (0)	Hey Shawn, you're the man! Can I also get he latest link?
	Appreciate 0 Quote

05-20-2017, 01:35 PM	#344
Kung Fu English Captain 142 Rep 605 Posts Drives: 2017 F80 M3 ZCP MG/SO Join Date: Jun 2013 Location: Goshen, IN iTrader: (2)	Sorry I can't figure any of this out. None of the guides are up to date. None of them make any sense. I can connect to the car fine. I got esys working I think. But the esys instructions I got said to pick a path and generate a token upon running the launcher, neither of which are actual options. I found the freetoken.est but not sure it's working right. When I connect and try to read the coding data, I get 4 errors, one on FEM_BODY which is like the main folder. Pic below. I tried to code euro mdm, and got into "edit FDL" on the dsc folder, but I couldn't find any of the parameters listed in the op. Just a bunch of folders with numbers 3000+. Then later it wouldn't get into it at all and gave me another error below. Is there an updated step by step guide? Attached Images
	Appreciate 0 Quote

05-22-2017, 12:40 PM	#345
SmooveBe New Member 0 Rep 18 Posts Drives: Never Dirty Mk 2 Join Date: Oct 2011 Location: Milwaukee, WI iTrader: (2)	Hey guys. My 2016 M3 MT arrived last friday and I'm ready to begin coding. I think the first step is to ask Shawn for the software. Super cool doing that..
	Appreciate 0 Quote

05-25-2017, 12:55 AM	#347
Hobbination Lieutenant 65 Rep 503 Posts Drives: 2015 M4 Join Date: Dec 2007 Location: Honolulu HI iTrader: (0)	2018 lci LEDs, can they be coded to euro spec dazzle as well? Same procedure?
	Appreciate 0 Quote

06-13-2017, 03:43 PM	#348
jollib Private 7 Rep 59 Posts Drives: 2016 M3 Join Date: May 2017 Location: San Diego iTrader: (0)	Hi Shawn is it possible to get the latest links as well.
	Appreciate 0 Quote

06-13-2017, 11:21 PM	#350
Doctor1973 Private 30 Rep 77 Posts Drives: Bmw M4 YMB Join Date: Sep 2016 Location: Italy iTrader: (0)	Hi, with new LCI headlights how can I increase angel eyes brightness to 100%? And then one touch blinker set to 5 is not working anymore with latest sw update. 61.05. Can someone guide me? THX
	Appreciate 0 Quote

06-23-2017, 12:35 AM	#352
drkeng Major 156 Rep 1,014 Posts Drives: '18 M4 'vert Tanz Blue Join Date: Apr 2005 Location: Northbrook, IL iTrader: (0)	Shawn, could I get the latest links, please? admittedly too lazy to read through whole thread. can we code for antidazzle in USA? "undo the decoding" listed on the sticker has anyone coded for the convertible top to operate at higher speeds than 9 mph? I believe it's significantly higher in Europe. __________________ ///M4 'vert
	Appreciate 0 Quote