Official Signature Wheel Gallery | Fitment Q&A Thread

[x.shell]

Dat brush though... mmmm

[Signature Wheel BMW]

We precision measure every possible brake calipers to ensure the wheels fit like a well tailored Italian suit.

[specterbmw]

Originally Posted by Signature Wheel BMW

PM sent.

Track guys demanded even lighter version of the SV101, so here you have it. We found areas in the old design that materials can be removed from without sacrificing structural integrity. The design process required hours of 3-D stress testing and it's now officially VIA/JWL certified. I'm taking orders today.

So you guys actually sent these wheels out to VIA lab to get stress tested and certified VIA for what offset's and sizes's?

[EB166]

Originally Posted by Signature Wheel BMW

Signature SV302 - brushed black barrel, brushed black face, and hidden hardware. 20x9.5 ET15 and 20x11 ET30 - 235/35/20 front and 285/30/20 rear. CATuned Coilovers. More aggressive than our standard recommendation, but the owner Seth loves the look.

Can you guys send me a quote of this exact set up in this color?

[Signature Wheel BMW]

Originally Posted by specterbmw

So you guys actually sent these wheels out to VIA lab to get stress tested and certified VIA for what offset's and sizes's?

We use VIA certified machines at the factory to test JWL's strict standard for Dynamic Radial Fatique Test, Dynamic Cornering Fatique Test, and Impact Test. Due to millions of possible width, size, offset, hub bore, and lug patterns we test a few specific sizes to ensure consistency. Each wheel comes with JWL certificate sticker with VIA approved stamp.

[Signature Wheel BMW]

Originally Posted by EB166

Can you guys send me a quote of this exact set up in this color?

PM Sent.

I'm digging this 19/20 setup by exo-shell

SV104 Brushed Black Tinted - 19x10 ET23 and 20x11 ET36. So dang flushed...

[DavidGP]

Close up of the SV104 in Brushed with Mineral Gray in the background. These wheels are a work of art.

[T1M3LESS]

Originally Posted by exo-shell

Dat brush though... mmmm

Can't get over that finish. looks really good man!

[x.shell]

Originally Posted by tim3less2

Can't get over that finish. looks really good man!

Thanks! Whenever light hits it.... oh man.

[Signature Wheel BMW]

Thanks so much for your support in 2016, everyone. We had a record month in December.

For 2017, our SV101, 301, and 303 have been revised. SV101 photos are now public and orders being filled. Here's the SV303, one of the first sets will be on a 1,200HP GTR.



Signature is founded by a group of car enthusiasts, street runners, and track rats. Our wheels are precision made to take a beating, hitting rumble strips at 120mph or being powered by 2,200HP+ Lambo Huracan to take on the next world lambo speed record. Pure Turbo Europe will also run our wheels to attempt for the record of the fastest F80 in Europe.

What makes Signature unique is we treat our clients as if they're buying a Rolex, with integrity and highest respect. Clients are not just a order number for us, but they're part of our family and car culture.

Review from the Lotus 2016 USA Cup Championship Team:
"We completed 2 full race weekends at Buttonwillow and Laguna Seca where Nicolai swept all 4 races leading from pole 3 times to finish with no less than a 9 second lead to as much as a 32 second lead in Lotus Cup Trophy class. He qualified at Laguna Seca 1:33.5.

FYI, Nicolai won the 2016 Lotus Cup USA Trophy class series championship with several convincing wins from the back of the pack. Great season of racing and your signature wheels have held up well." - 2016 Lotus USA Cup Championship Team

Nicolai leading the pack:

[skalberti]

Originally Posted by exo-shell

Using my previous RE11 at 265/35/19. I'll most likely stick to that same size when I change it to an RE71R, but I might go 255/35/19 if the RE71R turns out to be a bit wider.

I finally washed the car. It's forecast to rain again. But the car was looking pretty haggard, so I decided to wash it. Tire dressing adds some contrast and really makes the wheels pop.

Any rock chip problems running these widths and offsets? Also do the CF side skirts help with keeping the rocks from being kicked up?

[x.shell]

Originally Posted by skalberti

Any rock chip problems running these widths and offsets? Also do the CF side skirts help with keeping the rocks from being kicked up?

No problems yet. Thankfully, the areas I drive are dirt free (for the most part). Also important to note, I'm not really OCD like that; so a couple chips/scratches here and there doesn't bother me. I do know that the RE71R is a very sticky tire. So we'll see if my rear bumper gets trashed or not.

If keeping the paint 100% chip free is a top priority, then getting any wheels that have aggressive offsets should be avoided. Or you should get the car clear bra'd and ceramic coated.

The side skirts are M-Performance. Theoretically, they should help deflect a large portion of rogue pebbles, but I haven't done any sort of comparison to quantify that.

[Signature Wheel BMW]

Introducing our new Signature SV301(S). What do you think?

[dmk08]

Originally Posted by Signature Wheel BMW

Introducing our new Signature SV301(S). What do you think?

Im not a fan of 5-Stars on the F80/F82 but overall I like the wheel design.

[clericdc]

Another sv104 owner here!





19x9.5 et 20
19x11 et 40
- swift springs w/ OE tires transferred over, plan to go wider eventually, fits great with room to spare.


as for the finish, its very dynamic, sometimes it takes on a dark, near gloss black look, but other times it takes on a goldish hue in sunlight. Personally I like it a lot.
quality and finish of the wheels are great, time will tell how they hold up.

more to come when they get a bath and proper modeling time.

[ryank382]

Originally Posted by clericdc

Another sv104 owner here!





19x9.5 et 20
19x11 et 40
- swift springs w/ OE tires transferred over, plan to go wider eventually, fits great with room to spare.


as for the finish, its very dynamic, sometimes it takes on a dark, near gloss black look, but other times it takes on a goldish hue in sunlight. Personally I like it a lot.
quality and finish of the wheels are great, time will tell how they hold up.

more to come when they get a bath and proper modeling time.

Looks great! Do u have pics of the whole car by any chance? I havnt seen pics of the wheels on a white car yet and I'm planning to pull the trigger on the wheels as soon as I figure out my exact fitment specs

[T1M3LESS]

More pics of the Signature One

19x9.5 et 20, 19x11 et 40
Tires are MPSS 265/35/19, 305/30/19
Lowered on KW V3s

[dmk08]

Originally Posted by clericdc

Another sv104 owner here!



19x9.5 et 20
19x11 et 40
- swift springs w/ OE tires transferred over, plan to go wider eventually, fits great with room to spare.


as for the finish, its very dynamic, sometimes it takes on a dark, near gloss black look, but other times it takes on a goldish hue in sunlight. Personally I like it a lot.
quality and finish of the wheels are great, time will tell how they hold up.

more to come when they get a bath and proper modeling time.

Interesting. This looks better than I thought it would with stock tires. Makes me think I could order these in 20s with the same offsets and easily use my stock 265/285 MPSS for a while. This way I could wait for the MPS4 before I shell out for new tires.

[ryank382]

Originally Posted by tim3less2

More pics of the Signature One

19x9.5 et 20, 19x11 et 40
Tires are MPSS 265/35/19, 305/30/19
Lowered on KW V3s

What offset are you on? Do you rub at all? I struggle with the fact that no matter what you do if you go 19s all around the front wheels will always be taller (bigger diameter). Only way to fix that is 20s in the rear but then you're very limited with tire options. Cnt decide what to do

[dmk08]

Originally Posted by ryank382

What offset are you on? Do you rub at all? I struggle with the fact that no matter what you do if you go 19s all around the front wheels will always be taller (bigger diameter). Only way to fix that is 20s in the rear but then you're very limited with tire options. Cnt decide what to do

Unless you want R Compounds tires shouldn't be too bad. I have been struggling too but ill probably end up on all 20s with Michelin PS4.

[ryank382]

Originally Posted by dmk08

Unless you want R Compounds tires shouldn't be too bad. I have been struggling too but ill probably end up on all 20s with Michelin PS4.

I want something better then PSS I need more grip lol I'm thinking RE-11 or RE-71R or Venus R-S3 version 2(cheaper but idk if they're as good as the others. I also love the squared tire look). I can't decide what to do. As soon as I decide I'm ordering my wheels and tires

[dmk08]

Originally Posted by ryank382

I want something better then PSS I need more grip lol I'm thinking RE-11 or RE-71R or Venus R-S3 version 2(cheaper but idk if they're as good as the others. I also love the squared tire look). I can't decide what to do. As soon as I decide I'm ordering my wheels and tires

Well - I came up with two solutions but if you want R Compounds I would say go with the mix. Solution 2 is calling my name as my car will spin the tires in 4th gear currently but I'm wimping out. Just worried I wont like the stagger.

Solution 1 - Michelin PSS/PS4
20x9.5 +20
20x11 +40

Solution 2 - RE71-R
19x9.5 +20
20x11 +40

Whatever you do don't disgrace your M with Hankooks