OLED Tail Lights for F80 M3

[Abdul]

Originally Posted by Hokayy

I'm having fitment issues with getting Passenger Trunk one to fit in properly. Additionally the tighter screw thats with the screw to make it secure is completely stripped. I cannot get the screw back into the hole and for that piece to help secure the lights. Even when I tried my best to get it to fit flush to the trunk panel, there would be a gap (towards the license plate) and unable to get it tighten down.

Anyone ran into this issue during install? I currently have my OEM back into the Passenger trunk side and rest GTS so looks janky as hell.

If someone can help you out on the forums with this, that's great. Never had anyone else report a fitment issue. Worst case scenario, I'll send you a replacement set.

[Jockey]

Originally Posted by Hokayy

I'm having fitment issues with getting Passenger Trunk one to fit in properly. Additionally the tighter screw thats with the screw to make it secure is completely stripped. I cannot get the screw back into the hole and for that piece to help secure the lights. Even when I tried my best to get it to fit flush to the trunk panel, there would be a gap (towards the license plate) and unable to get it tighten down.

Anyone ran into this issue during install? I currently have my OEM back into the Passenger trunk side and rest GTS so looks janky as hell.

How did you manage to strip that screw going into a plastic piece?

[Hokayy]

Originally Posted by Jockey

How did you manage to strip that screw going into a plastic piece?

Originally Posted by Jockey

How did you manage to strip that screw going into a plastic piece?

Honestly, I'm not sure, the flange nut is just stuck and the top screw is now out of the housing where it's suppose to be.

[Hokayy]

Originally Posted by Abdul

If someone can help you out on the forums with this, that's great. Never had anyone else report a fitment issue. Worst case scenario, I'll send you a replacement set.

Originally Posted by Jockey

How did you manage to strip that screw going into a plastic piece?

Originally Posted by Abdul

If someone can help you out on the forums with this, that's great. Never had anyone else report a fitment issue. Worst case scenario, I'll send you a replacement set.

Trunk one is PITA IMO. No one really showed in detail of the figment on install videos I looked up. All of them said push and clip and then screw it in place.

Abdul, could you please send a replacement? I got my OEM back on just fine under a few minutes. I've already PM you. Thanks.

[dubsesd]

[R3dliner]

+1 for Abdul. Finally got around to it. Inner lights driver side needed some massaging but passenger side went in like a breezy. Love the lights.

[RADIUS]

Pm sent Abdul…..

[M3fan8ic]

Thanks Abdul for quick delivery of these lights, I think it took speedy 3 days to get to me after my payment woohoo. Installed the lights without any issues and they work as they supposed to and look even better in person. Really compliments my BSM F80 M3C. I know I owe you all a pictures and a video..will be posting soon.

[guess2098]

I bought vland from Amazon. Install is easy for my cs. Fitment is 8/10. I removed some padding from both of trunk lights near the insert otherwise both trunk lights won't go into the place. I am thinking remove more padding but too much work. Will post some pic later

[Hokayy]

Originally Posted by guess2098

I bought vland from Amazon. Install is easy for my cs. Fitment is 8/10. I removed some padding from both of trunk lights near the insert otherwise both trunk lights won't go into the place. I am thinking remove more padding but too much work. Will post some pic later

Originally Posted by guess2098

I bought vland from Amazon. Install is easy for my cs. Fitment is 8/10. I removed some padding from both of trunk lights near the insert otherwise both trunk lights won't go into the place. I am thinking remove more padding but too much work. Will post some pic later

I'm still awaiting for a confirmation from Abdul if he is able to send a replacement.

Can you elaborate on more details on the padding for the trunk lights?

[guess2098]

Originally Posted by Hokayy

I'm still awaiting for a confirmation from Abdul if he is able to send a replacement.

Can you elaborate on more details on the padding for the trunk lights?

I have to use stock light to demonstrate as I am too lazy to remove and take more pic

[Hokayy]

Originally Posted by guess2098

I have to use stock light to demonstrate as I am too lazy to remove and take more pic

Thanks for the pics! Once you did the small trimming of the seals does it sit flush like oem fit?

[guess2098]

Originally Posted by Hokayy

Thanks for the pics! Once you did the small trimming of the seals does it sit flush like oem fit?

i only did where the insert is but i didn't do the other size. i will probably do the other side tonight because the gap is ugly.

[guess2098]

Originally Posted by Hokayy

Thanks for the pics! Once you did the small trimming of the seals does it sit flush like oem fit?

Trim it 1/2 off, it fits good

[M3fan8ic]

here are the pics and video

<iframe allow="fullscreen" allowfullscreen="true" frameborder="0" scrolling="no" width="1280" height="720" src="https://api.smugmug.com/services/embed/10664507894_p58cK3t?width=1280&height=720&albumId= 257038770&albumKey=tK2xBm"></iframe>

<a href="https://www.digitalmemories4you.com/Portfolio/M3CM2C/n-F3jM4t/i-LVjLwPK/A"><img src="https://photos.smugmug.com/photos/i-LVjLwPK/0/83d7e210/L/i-LVjLwPK-L.jpg" alt=""></a>

<a href="https://www.digitalmemories4you.com/Portfolio/M3CM2C/n-F3jM4t/i-d9BmPnp/A"><img src="https://photos.smugmug.com/photos/i-d9BmPnp/0/68e112fc/L/i-d9BmPnp-L.jpg" alt=""></a>

[M3fan8ic]

Here are the pictures and video





https://photos.smugmug.com/photos/i-...58cK3t-640.mp4

[Abdul]

Originally Posted by M3fan8ic

Here are the pictures and video





https://photos.smugmug.com/photos/i-...58cK3t-640.mp4

Looks beautiful!

[Abdul]

I apologize that I have been MIA on the forums for the past week or so. Had some family problems that I had to take care of. I caught up on all my PMs. If I missed you, please PM again.

The first 50 sets that are arriving are already sold. I also upgraded the shipping for another 50 to air shipping vs sea shipping and those sets should arrive in 2 weeks. So you can still get a set of those if you place your order now.

Finally, I've been getting slammed by a lot of local vendors as well as manufacturers for my pricing. I will HAVE to increase my pricing soon. I'm just buying more time. So if you're interested, go ahead and place the order.

https://mpowermotorsports.org/produc...l-tail-lights/

For F80 lights, I have a few smoked ones in stock and 2-3 more clear ones. I got lucky and asked them to sneak in some more lights with my F82 batch.

Here is a link to buy the F80 lights

https://mpowermotorsports.org/produc...e-tail-lights/


Abdul

[J_Spool]

Originally Posted by Abdul

I apologize that I have been MIA on the forums for the past week or so. Had some family problems that I had to take care of. I caught up on all my PMs. If I missed you, please PM again.

The first 50 sets that are arriving are already sold. I also upgraded the shipping for another 50 to air shipping vs sea shipping and those sets should arrive in 2 weeks. So you can still get a set of those if you place your order now.

Finally, I've been getting slammed by a lot of local vendors as well as manufacturers for my pricing. I will HAVE to increase my pricing soon. I'm just buying more time. So if you're interested, go ahead and place the order.

https://mpowermotorsports.org/produc...l-tail-lights/

For F80 lights, I have a few smoked ones in stock and 2-3 more clear ones. I got lucky and asked them to sneak in some more lights with my F82 batch.

Here is a link to buy the F80 lights

https://mpowermotorsports.org/produc...e-tail-lights/


Abdul

Gonna have to order me a set. Are these the same ones bayoptiks or bav sells? Curious

Also can you clear up which is which? I want the red ones like oem. Is there more than 2 versions?

[Groganrocket]

Hey guys just a heads up these are on Amazon for $390 and delivered by Friday, placed my order and not sure how long this will be at $390.

[fidozoom]

Hi Abdul,
Do you have any updates for those of us who placed orders and are eagerly awaiting the F83 lights?

Thanks!

Originally Posted by Abdul

I apologize that I have been MIA on the forums for the past week or so. Had some family problems that I had to take care of. I caught up on all my PMs. If I missed you, please PM again.

The first 50 sets that are arriving are already sold. I also upgraded the shipping for another 50 to air shipping vs sea shipping and those sets should arrive in 2 weeks. So you can still get a set of those if you place your order now.

Finally, I've been getting slammed by a lot of local vendors as well as manufacturers for my pricing. I will HAVE to increase my pricing soon. I'm just buying more time. So if you're interested, go ahead and place the order.

https://mpowermotorsports.org/produc...l-tail-lights/

For F80 lights, I have a few smoked ones in stock and 2-3 more clear ones. I got lucky and asked them to sneak in some more lights with my F82 batch.

Here is a link to buy the F80 lights

https://mpowermotorsports.org/produc...e-tail-lights/


Abdul

[Abdul]

Just replied to your PM. Lights have arrived in USA and are awaiting clearance from the customs. The longest wait time is over which is the time from Asia to USA.