666M Wheels, EMD Springs, PS4's

Vymur · 03-16-2023, 12:26 AM

Hi all,

Recently purchased a F80 M3. I bought some original 666M wheels and have wrapped them in PS4's. 265/30/R20 in the front and 285/30/R20 in the rear. My car is sitting on EMD springs.

I am wanting to know what spacers people run with the same setup without any rubbing. I tried a 15mm and that was a no go.

Post some photos below of your setup.

SC215 · 11-20-2023, 05:46 PM

I just got a M3 Comp with 666M's that's currently getting EMD springs and their 12.5mm spacers put on. I'll have pictures 12/1 or 12/2.

F8xMonster · 12-22-2023, 02:14 PM

No pics, but 10mm fits well and looks great IMO

M3SQRD · 12-29-2023, 03:23 PM

I’d go with 10 mm and use the Turner Motorsport version with the integrated hub extender. Some hub lips on BMWs are 10+ mm long so a typical 10 mm thick spacer design may not sit flush on the hub. You’d need to file the hub down to < 10 mm to ensure a typical 10 mm spacer sits flush.

03-16-2023, 12:26 AM	#1
Vymur Registered 0 Rep 3 Posts Drives: F80 M3 Join Date: Mar 2023 Location: New Zealand iTrader: (0)	666M Wheels, EMD Springs, PS4's Hi all, Recently purchased a F80 M3. I bought some original 666M wheels and have wrapped them in PS4's. 265/30/R20 in the front and 285/30/R20 in the rear. My car is sitting on EMD springs. I am wanting to know what spacers people run with the same setup without any rubbing. I tried a 15mm and that was a no go. Post some photos below of your setup.
	Appreciate 0 Tweet Quote

11-20-2023, 05:46 PM	#2
SC215 New Member 24 Rep 21 Posts Drives: 2018 BMW X3 m40i Join Date: May 2014 Location: Philadelphia, Pa iTrader: (0)	I just got a M3 Comp with 666M's that's currently getting EMD springs and their 12.5mm spacers put on. I'll have pictures 12/1 or 12/2.
	Appreciate 0 Quote

12-22-2023, 02:14 PM	#3
F8xMonster New Member 3 Rep 7 Posts Drives: M4 Join Date: Dec 2023 Location: The garage iTrader: (0)	No pics, but 10mm fits well and looks great IMO
	Appreciate 0 Quote

12-29-2023, 03:23 PM	#4
M3SQRD Major General 2161 Rep 5,545 Posts Drives: E92 M3,G20 330ix,F22 240iX,F82 Join Date: Jun 2009 Location: Mid-Atlantic iTrader: (11)	I’d go with 10 mm and use the Turner Motorsport version with the integrated hub extender. Some hub lips on BMWs are 10+ mm long so a typical 10 mm thick spacer design may not sit flush on the hub. You’d need to file the hub down to < 10 mm to ensure a typical 10 mm spacer sits flush.
	Appreciate 0 Quote