01-07-2024, 01:26 PM | #3 |
Captain
761
Rep 951
Posts |
Calibration is easy, turn ignition on (vehicle off), press seat side button to move the seat forward all the way, keep pressing the side button forward, the seat will stop travel then it will move a little further than normal and it resets back to its furthest travel. That last over travel is the calibration check. Release the button.
Move seat back to its normal resting position, cycle ignition off/on, if it doesn't clear try again, it took me twice. Also click on the error displayed on your screen and it should show you the procedure to calibrate the seat. That should reset your seat calibration warning.
__________________
M4CS Frozen Blue
ARM DP's/Resonated Mid-pipe | SPL links | Hotchkis bars | JRZ RS2/camber plates | K&N | Koyorad HX | Powerflex purple | Rouge | Spiegler | Speed Eng. snorkel | Vargas CBC/hub | Wagner IC | xHP | Xpel stealth ppf |
Appreciate
0
|
01-08-2024, 06:07 PM | #4 | |
Lieutenant
221
Rep 544
Posts |
Quote:
__________________
@cheungkyf80
|
|
Appreciate
1
Wanted_M760.50 |
01-08-2024, 08:47 PM | #5 |
Captain
761
Rep 951
Posts |
Cool, glad it worked out.
__________________
M4CS Frozen Blue
ARM DP's/Resonated Mid-pipe | SPL links | Hotchkis bars | JRZ RS2/camber plates | K&N | Koyorad HX | Powerflex purple | Rouge | Spiegler | Speed Eng. snorkel | Vargas CBC/hub | Wagner IC | xHP | Xpel stealth ppf |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|