BM3 Timing correction across all Cylinders

[jcr.m4]

Hello everyone,

For the past couple months I’ve been chasing why my cars is pulling timming randomly across all cylinders. The car does not hit as hard as it used to. I am currently running BM3 with Stage 2 Multimap running flex fuel. I recently changed the spark plugs to the ngk and gapped them to .022

I am thinking of buying a new set of coil packs but wanted to start this thread for feedback in case I’m missing anything in the logs.

https://bootmod3.net/log?id=651792dfc090c6d6d32de331

https://bootmod3.net/log?id=64e9a26ec090c6d20b25b052

Mods:
Vrsf Catless downpipes
BMC drop in filters
AA equal length mid pipe resonated
VTT CCB
BM3
BM3 Flex fuel sensor

[n8dgr84]

IATs look pretty high.
Try the coils and log again for the culture.

[jcr.m4]

Originally Posted by n8dgr84

IATs look pretty high.
Try the coils and log again for the culture.

Thanks, Didn’t take in to consideration the IAT, although the temperature was above 80 when the log was taken.