*** bootmod3 *** New Dashboard features

[proTUNING Freaks]

Hey guys, wanted to demo the new bootmod3 dashboard and gauge features to you that over time we have collected and now incorporated.

Here are the new features included with the latest 0.10.047 update:

- peak recall for min and max values
- re-arrangement of gauge using simple drag and drop
- close gauges by tapping on them and hitting the x in the top right corner
- orientation detection and handling so gauges render appropriately on mobile devices as device changes orientation from portrait to landscape and back
- ability to set alarms - min and max threshold values, if breached for a given channel with place a red border around that channel for a period of 5 secs currently. We can expand on this further if needed. Suggestions welcome as always
- configure precision(decimals) if defaults aren’t satisfactory for any reason (we have defaults set up for what we feel is pretty decent, e.g. engine speed won’t show with decimal places 🙂
- show a pointer on the gauge or turn it off
- change colours for pointer, gauge sweep and dial
- configure custom min and max values for each gauge
- configure gauge refresh speed. Default is realtime (fastest updating no delay) but you can now also slow down updates to each gauge as needed to 1, 5 or 10 Hz (1, 5 or 10 updates per second)
- set each gauge to imperial or metric units and in case of pressure channels to absolute or relative, overriding the global defaults if you like. Say boost you like in psi but temp you prefer Celsius for some reason, now you can
- speed, gauges in realtime even faster responding
- small mobile device screen support (i.e. iPhone 5)
- using a fixed width font for gauge values

There is more coming and as always we’re looking to you guys for suggestions so we can build this out even further where needed. Let us know your thoughts💪💪

Web version and the new OBD Agent are released. Android and iOS apps are in app review and should hopefully be available soon for download/update.

NOTE: Excuse the low res on the video. It was an upload to Facebook which decided to shrink the resolution of it for some reason

[parabmw]

Does the wifi agent device update itself?
Also when was the last firmware update?
Wondering how often this needs to be done as well.

[FAKE__NEWS]

Originally Posted by parabmw

Does the wifi agent device update itself?
Also when was the last firmware update?
Wondering how often this needs to be done as well.

https://bootmod3.atlassian.net/wiki/...irmware+Update

You can use that link and rewrite your SD card. Otherwise, the wifi agent will tell you when there's an update and you can push it from your phone to the wifi agent.

At least I think that's how it works. That's what I've been doing anyway.

[chewbakam4]

Swweeet! Lookjng forward to trying this out! Car still hibernating

[Mike@N54Tuning.com]

Nice job on that guys!!

Mike

[tom @ eas]

Got to test a lot of the new features on an F80 flash this morning, great work guys!

[mike@x-ph.com]

Looks great

[Brasko]

That's exciting!

[overlook637]

Any method to monitor or provide a warning light for low intercooler coolant?

[proTUNING Freaks]

Android version of the app should now be up on the Google Play store. Apple app store in review still..

Originally Posted by overlook637

Any method to monitor or provide a warning light for low intercooler coolant?

Coolant level isn't a loggable channel as far as I know, will take a look. Maybe we could add something to pull codes periodically and set off alarms hmmm

[4everkidd]

Originally Posted by overlook637

Any method to monitor or provide a warning light for low intercooler coolant?

Yes... Remove the cap and look at every fill up, second fill up etc

Remember cars with dipsticks? Same idea.

[overlook637]

Originally Posted by 4everkidd

Yes... Remove the cap and look at every fill up, second fill up etc

Remember cars with dipsticks? Same idea.

Never worried about oil leaking into my intake and causing hydrolock. I'd hate to take a weekend trip in my truck, then on Monday make an attempt to start the M only to bend a rod from a leaked intercooler into cylinders.

[overlook637]

Originally Posted by proTUNING Freaks

Android version of the app should now be up on the Google Play store. Apple app store in review still..



Coolant level isn't a loggable channel as far as I know, will take a look. Maybe we could add something to pull codes periodically and set off alarms hmmm

Is the coolant pump operating amps/volts logged? Is there any temp gauge on the A/W intercooler system?