F80 M3/M4 Competition Package ZCP 666M with Spacers Pics

cvn · 08-02-2016, 10:59 AM

Quote:

Originally Posted by Shmelgy

I'll probably move the 15mm to the front and get 18mm in back. Zero rubbing the way it sits now. Anyone want some 12s? ?

This car is perfect !

SROC3 · 08-02-2016, 11:22 AM

Darn it......you're all making me want to slap 15mm's in my rear and change out the 12mm.

swalsh2333 · 08-02-2016, 01:11 PM

Quote:

Originally Posted by Kevin G

With photo...

P.S. I will be adding Macht Schnell springs though!

Are you able to post more pics before you install the springs?

Kevin G · 08-02-2016, 04:39 PM

Another photo.

I could see pushing wider for aesthetics, but my concern would be then detrimental performance.

P.S. 10/12 is what EAS recommended.

CaryTheLabelGuy · 08-02-2016, 08:53 PM

Quote:

Originally Posted by W///

Carry's car with 15mm all around and Swift springs. Looks great IMO

Just seeing this thread. Thanks for sharing my car!

ApexL8 · 08-08-2016, 03:26 PM

Not trying to threadjack but can anyone tell me which tires should be on my car when I ED on Sept 12th? I did go with ZCP.

Thanks!

Kevin G · 08-08-2016, 06:08 PM

Quote:

Originally Posted by ApexL8

Not trying to threadjack but can anyone tell me which tires should be on my car when I ED on Sept 12th? I did go with ZCP.

Thanks!

I think Mishy PSS are on all ZCP models.

ApexL8 · 08-08-2016, 07:20 PM

Quote:

Originally Posted by Kevin G

I think Mishy PSS are on all ZCP models.

Thanks!

Rooz · 08-17-2016, 08:58 PM

Quote:

Originally Posted by ApexL8

Not trying to threadjack but can anyone tell me which tires should be on my car when I ED on Sept 12th? I did go with ZCP.

Thanks!

I think mine were Michelin PSS 265's front and I think rears were 285's?

Rooz · 08-17-2016, 09:03 PM

Quote:

Originally Posted by Shmelgy

I'll probably move the 15mm to the front and get 18mm in back. Zero rubbing the way it sits now. Anyone want some 12s? ?

If I am correct you have 15mm rears and 12mm front, right? Any issues at all when doing a hard U-turn? Any rubbing at all in rear (even with fully loaded car)?

Shmelgy · 08-18-2016, 05:18 AM

Quote:

Originally Posted by Rooz

Quote:

Originally Posted by Shmelgy

I'll probably move the 15mm to the front and get 18mm in back. Zero rubbing the way it sits now. Anyone want some 12s? ?

If I am correct you have 15mm rears and 12mm front, right? Any issues at all when doing a hard U-turn? Any rubbing at all in rear (even with fully loaded car)?

No problems with rubbing in the rear (15mm) even with fully loaded trunk. I recently added 20mm to the front and took off the 12mm. I didn't have any rubbing on u-turns before, but I think there might be slight rubbing now on the inner fender liner. I'll check for marks and get back to you

Rooz · 08-18-2016, 07:57 AM

Quote:

Originally Posted by Shmelgy

No problems with rubbing in the rear (15mm) even with fully loaded trunk. I recently added 20mm to the front and took off the 12mm. I didn't have any rubbing on u-turns before, but I think there might be slight rubbing now on the inner fender liner. I'll check for marks and get back to you

Cool, thank you, also, are you trying to get rid of the 12mms? I was thinking of getting the kit from BMS, could take them off your hands maybe?

ApexL8 · 08-18-2016, 11:18 AM

Quote:

Originally Posted by Rooz

I think mine were Michelin PSS 265's front and I think rears were 285's?

Thanks!

Justin.AutoTalent · 08-18-2016, 10:14 PM

Here's Shmelgy's zcp on 15mm front/12mm rear

Shmelgy · 08-18-2016, 11:27 PM

Quote:

Originally Posted by Justin | AutoTalent

Here's Shmelgy's zcp on 15mm front/12mm rear

That's 12 front/15 rear before I added -2.5 camber up front

Kevin G · 08-19-2016, 02:05 AM

Anyone gots ZCP with MS springs and spacers larger than 10/12? Wondering if I should go wider.

RJCrew · 08-19-2016, 08:15 PM

Just installed mine today with MS 10mm front /10mm rear and I think it's perfect. My car is stock and not lowered.

swalsh2333 · 08-20-2016, 11:03 AM

Quote:

Originally Posted by RJCrew

Just installed mine today with MS 10mm front /10mm rear and I think it's perfect. My car is stock and not lowered.

Can you post pics?

RJCrew · 08-22-2016, 11:29 PM

sorry took so long. i have to make my photos smaller. so basically the rear sits flush and the front is kinda sticking out a lil bit but not bad..overall i like it.

LOW4LYF · 08-23-2016, 07:00 AM

The front would be prefect lowered with a bit of camber...

swalsh2333 · 08-25-2016, 04:43 PM

Quote:

Originally Posted by RJCrew

sorry took so long. i have to make my photos smaller. so basically the rear sits flush and the front is kinda sticking out a lil bit but not bad..overall i like it.

Any other pics you can post? Thanks

domino_z · 08-29-2016, 11:46 PM

looking at RJ's pics, i think 5/7.5 would be a subtle and even stance on oe suspension

08-02-2016, 11:22 AM	#46
SROC3 The limit of adhesion is my home. 1702 Rep 3,778 Posts Drives: Like a Boss. Join Date: Sep 2006 Location: three.one.zero iTrader: (1)	Darn it......you're all making me want to slap 15mm's in my rear and change out the 12mm. __________________ 2019 X3 xDrive30i Glacier Silver \| Cognac w/ Fine Cove \| MSport \| Premium \| Dynamic Handling PKG \| Drive Assist \| HK w/ Bavsound Upgrade \|
	Appreciate 0 Quote

08-02-2016, 04:39 PM	#48
Kevin G Second Lieutenant 113 Rep 216 Posts Drives: '16 M3 ZCP Join Date: Oct 2008 Location: Irvine, CA iTrader: (2)	Another photo. I could see pushing wider for aesthetics, but my concern would be then detrimental performance. P.S. 10/12 is what EAS recommended. Attached Images __________________ F80 '16 M3 \| Alpine White + Sakhir Orange \| ZCP \| MS Sport Competition Springs \| MS Intake Scoops \| MS Spacers 10/12
	Appreciate 1 swalsh2333257.50 Quote

08-08-2016, 03:26 PM	#50
ApexL8 Private 22 Rep 57 Posts Drives: M-Powered Join Date: Jun 2016 Location: Northern Ohio iTrader: (0)	Not trying to threadjack but can anyone tell me which tires should be on my car when I ED on Sept 12th? I did go with ZCP. Thanks!
	Appreciate 0 Quote

08-18-2016, 10:14 PM	#58
Justin.AutoTalent Banned 3137 Rep 2,953 Posts Drives: F80 M3 Join Date: Jul 2016 Location: LA iTrader: (1)	Here's Shmelgy's zcp on 15mm front/12mm rear
	Appreciate 2 MacaoM3NJ71.50 AG23253.00 Quote

08-19-2016, 02:05 AM	#60
Kevin G Second Lieutenant 113 Rep 216 Posts Drives: '16 M3 ZCP Join Date: Oct 2008 Location: Irvine, CA iTrader: (2)	Anyone gots ZCP with MS springs and spacers larger than 10/12? Wondering if I should go wider. __________________ F80 '16 M3 \| Alpine White + Sakhir Orange \| ZCP \| MS Sport Competition Springs \| MS Intake Scoops \| MS Spacers 10/12
	Appreciate 0 Quote

08-19-2016, 08:15 PM	#61
RJCrew Second Lieutenant 51 Rep 215 Posts Drives: 2016 ///M4 ZCP SO/SO Join Date: Mar 2012 Location: East Coast iTrader: (1)	Just installed mine today with MS 10mm front /10mm rear and I think it's perfect. My car is stock and not lowered.
	Appreciate 0 Quote

08-22-2016, 11:29 PM	#63
RJCrew Second Lieutenant 51 Rep 215 Posts Drives: 2016 ///M4 ZCP SO/SO Join Date: Mar 2012 Location: East Coast iTrader: (1)	sorry took so long. i have to make my photos smaller. so basically the rear sits flush and the front is kinda sticking out a lil bit but not bad..overall i like it. Attached Images
	Appreciate 2 tommysains11.00 TractionControlDelete4587.00 Quote

08-23-2016, 07:00 AM	#64
LOW4LYF Brigadier General 2162 Rep 4,106 Posts Drives: E92 M3 & F85 X5M Join Date: Jul 2016 Location: @Home iTrader: (1)	The front would be prefect lowered with a bit of camber...
	Appreciate 0 Quote

08-29-2016, 11:46 PM	#66
domino_z Lieutenant Colonel 1240 Rep 1,971 Posts Drives: F-Pace SVR Join Date: Apr 2008 Location: Australia iTrader: (0)	looking at RJ's pics, i think 5/7.5 would be a subtle and even stance on oe suspension
	Appreciate 0 Quote