which cosmetic mods did you do to the interior (pics pls)

[hellokitty]

Originally Posted by mpower79

which model ?
its plug and play?

BMW model Rennline mount. Yes plug and play.

[///393]

Originally Posted by Kal_el

I need to do the ebrake still.

Small but makes a difference every day I drive it. Touch points matter.

[Redacre]

Seatbelts from Mashimarho

[jaylazy2020]

Originally Posted by Bennv59

Tried these speaker illumination kit from Ali. Not bad looks Oem when off and not too flashy

Looks well.

I've had my eye on those and I'm just waiting until I get the Eton speakers

I retrofitted the full bowers and Wilkins illuminated speakers in my previous G30 530d and my ten year old daughter seemed disappointed that the M4 speakers don't light up!


Is the colour tone and brightness the same as factory lighting?

[Wtfitzvi]

Originally Posted by Redacre

Seatbelts from Mashimarho

[img]

View post on imgur.com

[/img]

How was your overall experience with them? Place an order earlier this week and I still haven't received any tracking. I'm beginning to wonder if the items are even in stock.

[Redacre]

Originally Posted by Wtfitzvi

How was your overall experience with them? Place an order earlier this week and I still haven't received any tracking. I'm beginning to wonder if the items are even in stock.

Overall was positive, although I do wish they had included a sticker lol

The seatbelts took a while, but I think it's because they are assembled to order. I've ordered other parts from them like CSF and Goldenwrench that shipped out within a day or two. They are pretty responsive and especially active on IG, so just send them a message if you are concerned.

[Wtfitzvi]

Originally Posted by Redacre

Overall was positive, although I do wish they had included a sticker lol

The seatbelts took a while, but I think it's because they are assembled to order. I've ordered other parts from them like CSF and Goldenwrench that shipped out within a day or two. They are pretty responsive and especially active on IG, so just send them a message if you are concerned.

I'm gonna give it till Monday before I contact them. It'll be exactly 7 days then. They're probably behind and catching up on orders.

Glad to hear you had a positive experience.

[Donsta1980]

Originally Posted by larsek

need some ideas

Originally Posted by larsek

need some ideas

Lots of parts from Dinmann installed on mine. Plus a custom airbag cover in alcantara with contrast stitching.

[Belong]

From lightblue 12 o stripe to yellow to match the freshly painted brakecalipers

[shapiros]

Originally Posted by dizz81

Never understood why BMW would do the M stitching on the steering wheel and seatbelt but then leave the boots for the e-brake and shifter alone. So I had to fix that.

LOVE the quality. Plus I think it compliments the interior better.

Can I ask where you found the matte CF ebrake cover? I've only seen the glossy version and it's nice that it matches the shift knob.

[M3cosmos95]

Finished up my interior for the time being with some more M Performance matte carbon fiber pieces... I love that I didn't settle with the gloss stuff and made the M2cs pieces work!

Parts:
M Performance matte cf steering wheel trim
Autotecknic matte red M1/M2 buttons
Paddle Shifterz Matte CF shifters w/ red +&-
M Performance M2c Matte cf dct shift knob
M Performance M2c Matte cf dct shift trim
M Performance M2c Matte cf/ Alcantara e brake handle

[M 4 FUN]

I have every M perfprmance option from the factory on my car so i thought i could make something different just for fun. I made a trunk floor panel out of carbon fiber. We made it 5mm Soric honeycomb material to make it rigid and baked it on a glass shield. Then i cut out holes for the cargom net and put in the stock ones. then i cut and sanded all the edges and put on a texlile tape around the edges. I also put on a M performance logo.I think it went out quite well.

[M 4 FUN]

I already have all the M performance options from new on my car so i thought i could make something different. I made a carbon fiber trunk floor. We used 5mm Soric "honeycomb" for rigidity between the carbon sheets and baked it on glass. When that was done i cut holes for the OEM cargo net holders. After that i used a hacksaw to get the shape and then sanded all the edges. Next was to put on textile tape around the edges. Last thing was a M performance logo. I think it went out ok.

[wknd_M]

Originally Posted by M 4 FUN

I already have all the M performance options from new on my car so i thought i could make something different. I made a carbon fiber trunk floor. We used 5mm Soric "honeycomb" for rigidity between the carbon sheets and baked it on glass. When that was done i cut holes for the OEM cargo net holders. After that i used a hacksaw to get the shape and then sanded all the edges. Next was to put on textile tape around the edges. Last thing was a M performance logo. I think it went out ok.

That’s pretty cool

[rumzh]

Originally Posted by mike@x-ph.com

Hey Mike, any discounts for returning customers if I wanted to order a steering wheel?

[mike@x-ph.com]

Originally Posted by rumzh

Hey Mike, any discounts for returning customers if I wanted to order a steering wheel?

dm sent

[deli333]

some little additions...

the gloss black buttons make it look complete. I thought it would not do all but the end result is sick.

[NSX2M4]

I love the stitching but the meter panel in yellow is very civic 90's. Everything else is 100%

[deli333]

it reminds me of lambo dashes tbh

[NSX2M4]

Originally Posted by deli333

it reminds me of lambo dashes tbh

Maybe so. But it's a BMW...
I really like the airbag stitching, good job on that one!