Coding - Pay It Forward

shawnsheridan · 10-27-2019, 09:12 PM

Quote:

Originally Posted by Liquid2.0T

Hi Shawn or anyone else, can I have the latest version of Esys and pszd lite

My car was flashed at the dealer and I lost all of my coding. It looks like my version of Esys is not reading the ECUs properly as I get errors. Thanks in advance.

PM sent.

Liquid2.0T · 11-01-2019, 08:23 PM

Got it, thanks!

arucano · 11-07-2019, 02:04 PM

Somewhere along the line I lost the "fuel stop" feature on the Nav system. I have gone through the thread but cant find the coding to restore. Any help will be appreciated.

Jwild90 · 12-10-2019, 11:30 AM

Hello,

Im new and been looking around learning about coding the F chassis,
Ive downloaded the Esys luncher premium v2.8.2.155 and once I generate the token and hit lunch it ask again to put in the PIN to generate token... If someone could direct me to right directions it would be great! Thanks

shawnsheridan · 12-10-2019, 12:03 PM

Quote:

Originally Posted by Jwild90

Hello,

Im new and been looking around learning about coding the F chassis,
Ive downloaded the Esys luncher premium v2.8.2.155 and once I generate the token and hit lunch it ask again to put in the PIN to generate token... If someone could direct me to right directions it would be great! Thanks

Unfortunately, E-Sys Launcher PREMIUM 2.8.2 .EST Token expired 12/30/2018, and for now there is no updated E-Sys Launcher.

You can use E-Sys Launcher PRO 2.8.2 for free, at least until April 2020 when it expires:
http://tokenmaster.blogspot.com/2019...r-pro-282.html

Jwild90 · 12-10-2019, 04:23 PM

Quote:

Originally Posted by shawnsheridan

Unfortunately, E-Sys Launcher PREMIUM 2.8.2 .EST Token expired 12/30/2018, and for now there is no updated E-Sys Launcher.

You can use E-Sys Launcher PRO 2.8.2 for free, at least until April 2020 when it expires:
http://tokenmaster.blogspot.com/2019...r-pro-282.html

Thank you!

and wow... read the link you gave me and that is sad...
now I was also looking to buy the cable and noticed on ebay selling cable and couple of CDs for Esys and what not... guessing these are the low life theives you mentioned in that link...? so... where and which cable should I purchase...? So i can avoid helping theives.

shawnsheridan · 12-10-2019, 04:29 PM

Quote:

Originally Posted by Jwild90

Thank you!

and wow... read the link you gave me and that is sad...
now I was also looking to buy the cable and noticed on ebay selling cable and couple of CDs for Esys and what not... guessing these are the low life theives you mentioned in that link...? so... where and which cable should I purchase...? So i can avoid helping theives.

Those are TokenMaster's words, not mine.

Any ~$20 USD ENET Cable off eBay or Amazon should work. It should not be bundled with any software.

Jwild90 · 12-10-2019, 04:44 PM

Quote:

Originally Posted by shawnsheridan

Those are TokenMaster's words, not mine.

Any ~$20 USD ENET Cable off eBay or Amazon should work. It should not be bundled with any software.

oh... sorry new to forum stuff... okay just the cable it self thats under 20.

Thank you.

Penguinman87 · 12-11-2019, 05:35 PM

Hi Shawn,

Can I have the link for the latest version of Esys and pszd?

Thanks in advance.

shawnsheridan · 12-11-2019, 06:45 PM

Quote:

Originally Posted by Penguinman87

Hi Shawn,

Can I have the link for the latest version of Esys and pszd?

Thanks in advance.

PM sent.

TN_3 · 12-28-2019, 10:31 PM

shawnsheridan

Latest Esys and data files please. Thanks!

shawnsheridan · 12-29-2019, 07:17 AM

Quote:

Originally Posted by TN_3

shawnsheridan

Latest Esys and data files please. Thanks!

PM sent.

nexit · 01-03-2020, 10:50 PM

shawnsheridan

Could you please PM the latest Esys and data files? Thanks!

shawnsheridan · 01-04-2020, 08:09 AM

Quote:

Originally Posted by nexit

shawnsheridan

Could you please PM the latest Esys and data files? Thanks!

PM sent.

shawnsheridan · 01-06-2020, 12:13 AM

Quote:

Originally Posted by SwiftCop

Hey Shawn,

Can I have the link for the latest version of Esys and pszd?

Thanks!

PM sent.

ludwig980 · 01-06-2020, 03:56 PM

Hi, I years back I already coded some options on my 2016 M4 DCT and now I would like to add GTS coding for steering and diff. I have an old version of the SW so I guess I will need some help to get started again.
Shawn would you be able to send me some info?

Thanks!

shawnsheridan · 01-06-2020, 04:06 PM

Quote:

Originally Posted by ludwig980

Hi, I years back I already coded some options on my 2016 M4 DCT and now I would like to add GTS coding for steering and diff. I have an old version of the SW so I guess I will need some help to get started again.
Shawn would you be able to send me some info?

Thanks!

PM sent.

MMMako · 01-10-2020, 09:58 AM

Quote:

Originally Posted by ludwig980

Hi, I years back I already coded some options on my 2016 M4 DCT and now I would like to add GTS coding for steering and diff. I have an old version of the SW so I guess I will need some help to get started again.
Shawn would you be able to send me some info?

Thanks!

shawnsheridan
I'm in the same situation and haven't coded my F80 since 2016. I'd like to code in some of the newer features and will need a link to the latest version. Thanks!

shawnsheridan · 01-10-2020, 04:33 PM

Quote:

Originally Posted by MMMako

shawnsheridan
I'm in the same situation and haven't coded my F80 since 2016. I'd like to code in some of the newer features and will need a link to the latest version. Thanks!

PM sent.

IKM3 · 01-19-2020, 02:23 PM

Hi Shawn - yet another request for the latest software...thanks!

shawnsheridan · 01-19-2020, 02:27 PM

Quote:

Originally Posted by IKM3

Hi Shawn - yet another request for the latest software...thanks!

PM sent.

IKM3 · 01-19-2020, 02:30 PM

Amazing... you are too fast man! Thanks again!!

11-01-2019, 08:23 PM	#750
Liquid2.0T Lieutenant 394 Rep 588 Posts Drives: It used to be a BMW... Join Date: May 2009 Location: Miami, FL iTrader: (0)	Got it, thanks!
	Appreciate 0 Quote

11-07-2019, 02:04 PM	#751
arucano Captain 251 Rep 628 Posts Drives: 2014 M6 Grand Coupe CP Join Date: May 2017 Location: Kingwood TX iTrader: (0) Garage List 2014 BMW M6 GC [10.00]	fuel stop display Somewhere along the line I lost the "fuel stop" feature on the Nav system. I have gone through the thread but cant find the coding to restore. Any help will be appreciated. __________________ F06 M6 Grand Coupe CP Sapphire Black Metallic The drive is the destination
	Appreciate 0 Quote

12-10-2019, 11:30 AM	#752
Jwild90 Private First Class 135 Rep 109 Posts Drives: 04'E46ZHP 20' F82M4Comp Join Date: Dec 2019 Location: NC iTrader: (0)	Hello, Im new and been looking around learning about coding the F chassis, Ive downloaded the Esys luncher premium v2.8.2.155 and once I generate the token and hit lunch it ask again to put in the PIN to generate token... If someone could direct me to right directions it would be great! Thanks
	Appreciate 0 Quote

12-11-2019, 05:35 PM	#757
Penguinman87 First Lieutenant 48 Rep 308 Posts Drives: 2021 G80 6MT Join Date: Jan 2012 Location: New York City iTrader: (6)	Hi Shawn, Can I have the link for the latest version of Esys and pszd? Thanks in advance.
	Appreciate 0 Quote

12-28-2019, 10:31 PM	#759
TN_3 Major 341 Rep 1,352 Posts Drives: 2018 M3 CS Join Date: Oct 2007 Location: Franklin, TN iTrader: (10) Garage List 2020 BMW X5 M50i G05 [0.00] 2018 BMW M3 CS F80 [0.00]	shawnsheridan Latest Esys and data files please. Thanks! __________________ 2018 M3 CS F80 l SMB l EXEC 2020 X5 M50i G05 l MW l BLACK l PREM l DHP l 22” l PARK l EXT S-LINE l LASER l TH l AG
	Appreciate 0 Quote

01-03-2020, 10:50 PM	#761
nexit New Member 16 Rep 24 Posts Drives: 20 m4cs & 19 x3 m40i Join Date: Jan 2017 Location: Boston, MA iTrader: (0)	shawnsheridan Could you please PM the latest Esys and data files? Thanks!
	Appreciate 0 Quote

01-06-2020, 03:56 PM	#764
ludwig980 Enlisted Member 2 Rep 46 Posts Drives: 2016 M4 Join Date: Oct 2016 Location: San Diego, CA iTrader: (0)	Hi, I years back I already coded some options on my 2016 M4 DCT and now I would like to add GTS coding for steering and diff. I have an old version of the SW so I guess I will need some help to get started again. Shawn would you be able to send me some info? Thanks!
	Appreciate 0 Quote

01-19-2020, 02:23 PM	#768
IKM3 More Cowbell...! 5 Rep 66 Posts Drives: G80 M3 Join Date: Oct 2010 Location: DC Metro iTrader: (1)	Hi Shawn - yet another request for the latest software...thanks!
	Appreciate 0 Quote

01-19-2020, 02:30 PM	#770
IKM3 More Cowbell...! 5 Rep 66 Posts Drives: G80 M3 Join Date: Oct 2010 Location: DC Metro iTrader: (1)	Amazing... you are too fast man! Thanks again!!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search