Feeler: 19" FS BC Forged RS-40 Gloss Black; PERFECT OEM Suspension fitment

RowanBuds · 10-08-2021, 12:28 PM

BIMMERPOST / Classifieds

Asking Price:

USD 2,400.00

Item Interest

Have a set of BC Forged RS-40's that were made for my F80 when ordered. These were part of my vision for the car which revolved around the venerable E90 ZCP - this set of wheels was the closest I could come to those ZCP wheels in a custom forged fitment.

The spec was planned out with the goal of fitting a 19" wheel over CCB's with no spacers, and allow me to run 275/295 -35 rubber without issues - on full OEM suspension. These were also built with a custom size center hole so that OEM centercaps will fit properly - caps not being included here.

Wheels are gloss black, 19" monoblock. 9.5" wide Front, 10.5" wide Rear.

The front 275, in MPSS when brand new, do rub right above the mold release nubs just a hair at full lock on the inner fender liners - when I say a hair, as soon as there are 3-400 miles on the car there is no contact at all. Initially we had measured for 30 profile front tires, but after seeing them on the car I needed a bit more sidewall. I believe if you fit them with MPS4S due to the different sidewall profiling there would be no rub even with brand new tires, but I have not tried this myself.

Have a LITTLE flexibility on the pricing, but I will not pay to box/ship them out.

The price is without rubber or TPMS.

2 of the wheels have been refinished (by reputable Needs Powdercoating, if you're local you may know them) solely due to inner barrel scratching from rocks catching behind the CCB's - this shouldn't be surprising to anyone with CCBs and 19" wheels.

In my opinion, this is the PERFECT set of wheels for those of you not trying to drop 7k on new hoops, and want your own custom finish done on them as you please. The current gloss black is in perfectly fine condition, but I do know some of you will pause at the 'only 2 refinished'. It's a good opportunity for really mean looking wheels on your car for under 3k (likely) with your own choice in finish and no BS 8-12 week lead time either, though wheels will be available after 10/31 due to scheduling on my end.

If there's serious interest I'll get them off the car and can provide photos. Wheels have never been curbed.

best place for additional photos is my IG, @lemansf80 - or search the forum here/my profile. I don't have many besides one evening photo session on the computer I'm using right now, will try to add more later on.

I cannot tell you how many other people swore I was lowered when seeing these wheels with 275/295 - 35 MPSS rubber on them; the rear looks incredible with this particular fitment.

I have sub-2500/3000 mile rubber on them right now, would consider selling together with MPSS for the right offer (i.e., 3500+) -my intent now is to put that rubber on my next wheels.

Reason for sale: Finally was able to lower my car, and spacers just aren't my bag, baby; it's new wheel time. Thanks for the interest.

RowanBuds · 10-08-2021, 12:50 PM

Adding photos (man, they look right, hard to part with these..)

RowanBuds · 10-13-2021, 09:44 AM

To the top!

carchrism5 · 10-14-2021, 05:17 AM

What are the offsets?

RowanBuds · 10-14-2021, 01:29 PM

Quote:

Originally Posted by carchrism5

What are the offsets?

+25F / +35R

4DRS55 · 10-16-2021, 05:46 PM

Buy with confidence!!
Wheels are Pristine and look great!

10-08-2021, 12:28 PM	#1
RowanBuds Colonel 1707 Rep 2,053 Posts Drives: 3 pedal 718, G05, MkVII GTI Join Date: Dec 2008 Location: Bergen County, NJ iTrader: (0)	Feeler: 19" FS BC Forged RS-40 Gloss Black; PERFECT OEM Suspension fitment BIMMERPOST / Classifieds Asking Price: USD 2,400.00 Item Interest Have a set of BC Forged RS-40's that were made for my F80 when ordered. These were part of my vision for the car which revolved around the venerable E90 ZCP - this set of wheels was the closest I could come to those ZCP wheels in a custom forged fitment. The spec was planned out with the goal of fitting a 19" wheel over CCB's with no spacers, and allow me to run 275/295 -35 rubber without issues - on full OEM suspension. These were also built with a custom size center hole so that OEM centercaps will fit properly - caps not being included here. Wheels are gloss black, 19" monoblock. 9.5" wide Front, 10.5" wide Rear. The front 275, in MPSS when brand new, do rub right above the mold release nubs just a hair at full lock on the inner fender liners - when I say a hair, as soon as there are 3-400 miles on the car there is no contact at all. Initially we had measured for 30 profile front tires, but after seeing them on the car I needed a bit more sidewall. I believe if you fit them with MPS4S due to the different sidewall profiling there would be no rub even with brand new tires, but I have not tried this myself. Have a LITTLE flexibility on the pricing, but I will not pay to box/ship them out. The price is without rubber or TPMS. 2 of the wheels have been refinished (by reputable Needs Powdercoating, if you're local you may know them) solely due to inner barrel scratching from rocks catching behind the CCB's - this shouldn't be surprising to anyone with CCBs and 19" wheels. In my opinion, this is the PERFECT set of wheels for those of you not trying to drop 7k on new hoops, and want your own custom finish done on them as you please. The current gloss black is in perfectly fine condition, but I do know some of you will pause at the 'only 2 refinished'. It's a good opportunity for really mean looking wheels on your car for under 3k (likely) with your own choice in finish and no BS 8-12 week lead time either, though wheels will be available after 10/31 due to scheduling on my end. If there's serious interest I'll get them off the car and can provide photos. Wheels have never been curbed. best place for additional photos is my IG, @lemansf80 - or search the forum here/my profile. I don't have many besides one evening photo session on the computer I'm using right now, will try to add more later on. I cannot tell you how many other people swore I was lowered when seeing these wheels with 275/295 - 35 MPSS rubber on them; the rear looks incredible with this particular fitment. I have sub-2500/3000 mile rubber on them right now, would consider selling together with MPSS for the right offer (i.e., 3500+) -my intent now is to put that rubber on my next wheels. Reason for sale: Finally was able to lower my car, and spacers just aren't my bag, baby; it's new wheel time. Thanks for the interest. Attached Images __________________ Moved to the darkside: '23 718 GT4; 11-10-2022. Le Mans Blue F80 - Munich 5-22-2015 / US 7-7-2015 / SOLD 9-17-2022 ED Recap Arctic Grey G05 - Spartanburg 8-29-2019 X5 PCD Recap Last edited by RowanBuds; 10-08-2021 at 01:51 PM..
	Appreciate 0 Tweet Quote

10-08-2021, 12:50 PM	#2
RowanBuds Colonel 1707 Rep 2,053 Posts Drives: 3 pedal 718, G05, MkVII GTI Join Date: Dec 2008 Location: Bergen County, NJ iTrader: (0)	Adding photos (man, they look right, hard to part with these..) Attached Images __________________ Moved to the darkside: '23 718 GT4; 11-10-2022. Le Mans Blue F80 - Munich 5-22-2015 / US 7-7-2015 / SOLD 9-17-2022 ED Recap Arctic Grey G05 - Spartanburg 8-29-2019 X5 PCD Recap
	Appreciate 0 Quote

10-13-2021, 09:44 AM	#3
RowanBuds Colonel 1707 Rep 2,053 Posts Drives: 3 pedal 718, G05, MkVII GTI Join Date: Dec 2008 Location: Bergen County, NJ iTrader: (0)	To the top! __________________ Moved to the darkside: '23 718 GT4; 11-10-2022. Le Mans Blue F80 - Munich 5-22-2015 / US 7-7-2015 / SOLD 9-17-2022 ED Recap Arctic Grey G05 - Spartanburg 8-29-2019 X5 PCD Recap
	Appreciate 0 Quote

10-14-2021, 05:17 AM	#4
carchrism5 Lieutenant Colonel 336 Rep 1,589 Posts Drives: M2, X3 M40i, 911 Join Date: Jun 2007 Location: NC iTrader: (3)	What are the offsets?
	Appreciate 0 Quote

10-16-2021, 05:46 PM	#6
4DRS55 Major 1254 Rep 1,160 Posts Drives: GTF80,718GT4,TVG80,G05X5 Join Date: Jun 2012 Location: NY iTrader: (2)	Bump Buy with confidence!! Wheels are Pristine and look great!
	Appreciate 2 2SNAILS2085.50 RowanBuds1707.00 Quote