EBay CF Side Skirts Review (buy em!)

nickl630 · 04-23-2020, 02:34 PM

looks good!

NSX2M4 · 04-23-2020, 04:35 PM

Quote:

Originally Posted by nickl630

looks good!

Thanks. Your post helped me pull the trigger. I actually got them for 219 bucks shipped with a prime promo.
They supplied the package with a full roll of authentic VHB 3m tape. Still have half a roll.

jmg · 04-28-2020, 10:37 AM

So these are screwed and taped on?

Geez3 · 04-28-2020, 12:15 PM

I recently purchased these from ExtremeOnlineSpoiler off eBay. Came packed really well, in a long tube.

Overall finish is OK. Some small, hardly noticeable spots, where the carbon doesn/t look impregnated by the resin. Underside is not finished.

Install is with 3M tape, supplied, and self-tapping screws into the rocker. The holes are pre-drilled and screws supplied.

Added the edge striping to match the front theme. These are the M-perf copies so the extension is not that extreme. I have kicked them twice with my heel, so to echo others, I am hesitant about going bigger. If I did RKP look really well made and would be the winner.

[img]https://iili.io/JR7Hfp.md.jpg[/img]

horsepower_and_hounds · 05-02-2020, 07:50 PM

Quote:

Originally Posted by Geez3

I recently purchased these from ExtremeOnlineSpoiler off eBay. Came packed really well, in a long tube.

Overall finish is OK. Some small, hardly noticeable spots, where the carbon doesn/t look impregnated by the resin. Underside is not finished.

Install is with 3M tape, supplied, and self-tapping screws into the rocker. The holes are pre-drilled and screws supplied.

Added the edge striping to match the front theme. These are the M-perf copies so the extension is not that extreme. I have kicked them twice with my heel, so to echo others, I am hesitant about going bigger. If I did RKP look really well made and would be the winner.

[img]https://iili.io/JR7Hfp.md.jpg[/img]

ExtremeOnlineSpoiler or ExtremeOnlineStore?

Geez3 · 05-02-2020, 08:16 PM

Quote:

Originally Posted by horsepower_and_hounds

ExtremeOnlineSpoiler or ExtremeOnlineStore?

Just checked.

Extreme Online Store

Eric SS · 02-07-2021, 03:15 PM

Just wanted to add to this. I bought these EOS (Extreme Online Store) side skirts from Amazon and they're well worth the $289. Figment was very good and weave is pretty good as well. I got the non-extended ones so they look just like the M performance side blades as far as size goes. They also have an extended set for something like $329but I didn't want anything that stuck out more.

prodigal77 · 02-07-2021, 07:41 PM

I got those ones also (from extreme online store), had them for over a year and love em.

Quote:

Originally Posted by NSX2M4

I installed these last week from EOS. They're pretty good for
less than 300 bucks.
Perfect fitment.

ONEof500 · 02-10-2021, 10:27 PM

Two questions

Do they have to be cut to fit around the jack points?

Is the clear coat holding up?

Eric SS · 02-12-2021, 10:39 AM

Quote:

Originally Posted by ONEof500

Two questions

Do they have to be cut to fit around the jack points?

Is the clear coat holding up?

I can't answer the second question but there is no cutting. In fact, I installed them while the car was on jacks at the jack points. There is no clearance issue.

NSX2M4 · 03-04-2021, 05:53 PM

Quote:

Originally Posted by ONEof500

Two questions

Do they have to be cut to fit around the jack points?

Is the clear coat holding up?

I cannot comment on cutting them since you have an F80 not an F82.
As far as the jacking points, not obstructed here for me. Clear coat holding up just fine.

sna66 · 03-11-2021, 10:30 PM

I got these as well, but the screws seem to be too long, did you guys have to use shorter screws?

IRNM3 · 03-12-2021, 12:13 PM

How do the carbon weaves compare to the m. performance? Will it look the same?

nickl630 · 03-12-2021, 10:18 PM

Quote:

Originally Posted by ONEof500

Two questions

Do they have to be cut to fit around the jack points?

Is the clear coat holding up?

Yes they dont cover the jack points, and no issues with clear/weave so car, had em for about a year in the hot florida sun!

Mrfurious214 · 03-13-2021, 07:14 AM

Did anyone get the extended version for the M3? Would love to see pics of how far they stick out

IRNM3 · 03-16-2021, 12:59 PM

Figured I'd bump my question. Does the carbon weave match the weave on the stock mirrors and splitter?

nickl630 · 03-17-2021, 12:11 AM

Quote:

Originally Posted by IRNM3

Figured I'd bump my question. Does the carbon weave match the weave on the stock mirrors and splitter?

Sorry, yes they do!

Marioec · 06-29-2022, 10:32 AM

Is this the one are we talking about ? How is the fit

https://www.amazon.com/Repalcement-2...ot_top?ie=UTF8

bmwbrad22 · 07-02-2022, 07:13 PM

These are the exact ones I'm going to order, I'm just sorting out a lip issue with a vendor and then ordering I will do a nice right up on them as well, maybe even a video for the forum.

:

jeremyuhh · 07-09-2022, 11:44 PM

Pom performance skirts are solid. Wanted an RKP but this sticks out enough and doesn't break the bank.

RogRRR · 07-13-2022, 07:25 AM

Quote:

Originally Posted by jeremyuhh

Pom performance skirts are solid. Wanted an RKP but this sticks out enough and doesn't break the bank.

Did you DIY the install or take it someplace?

jeremyuhh · 07-13-2022, 10:39 PM

Quote:

Originally Posted by RogRRR

Quote:

Originally Posted by jeremyuhh

Pom performance skirts are solid. Wanted an RKP but this sticks out enough and doesn't break the bank.

Did you DIY the install or take it someplace?

Myself. You just screw it in. Lol.

And/or use double sided tape.

04-23-2020, 02:34 PM	#23
nickl630 Captain 500 Rep 712 Posts Drives: 18 M3CS, 09 GTR Join Date: Jan 2015 Location: Tampa, FL iTrader: (1)	looks good! __________________ 18 SMB M3CS - MPE/BM3/BMC Filters/Eibach V1's 481.1hp/505.5tq
	Appreciate 0 Quote

04-28-2020, 10:37 AM	#25
jmg Lieutenant General 18704 Rep 14,115 Posts Drives: G82 M4C X-Drive Join Date: Mar 2013 Location: Orange County, CA iTrader: (1) Garage List 2022 G82 M4C X-Drive [9.85] 2018 F80 M3 CS [9.87] 2019 i3 BEV [0.00]	So these are screwed and taped on? __________________ 2022 G82///M4 Competition X-Drive - KW-HAS, EBC Bluestuff, Millway Race Camber Plates, Cup2 Connect, PSI High Flow Midpipe, Lightweight Front Lip, M Perf Flow Through Wing Previous • 2018 F80 ///M3 CS • 2016 F80 ///*M3 IG: Raging_G82
	Appreciate 0 Quote

04-28-2020, 12:15 PM	#26
Geez3 Private 35 Rep 71 Posts Drives: F80 M3 Join Date: Jan 2019 Location: Fort Lauderdale iTrader: (0)	I recently purchased these from ExtremeOnlineSpoiler off eBay. Came packed really well, in a long tube. Overall finish is OK. Some small, hardly noticeable spots, where the carbon doesn/t look impregnated by the resin. Underside is not finished. Install is with 3M tape, supplied, and self-tapping screws into the rocker. The holes are pre-drilled and screws supplied. Added the edge striping to match the front theme. These are the M-perf copies so the extension is not that extreme. I have kicked them twice with my heel, so to echo others, I am hesitant about going bigger. If I did RKP look really well made and would be the winner. [img]https://iili.io/JR7Hfp.md.jpg[/img]
	Appreciate 0 Quote

02-07-2021, 03:15 PM	#29
Eric SS Lieutenant 195 Rep 467 Posts Drives: 2016 Chevy SS Sedan Join Date: Mar 2011 Location: Phoenix iTrader: (0)	Just wanted to add to this. I bought these EOS (Extreme Online Store) side skirts from Amazon and they're well worth the $289. Figment was very good and weave is pretty good as well. I got the non-extended ones so they look just like the M performance side blades as far as size goes. They also have an extended set for something like $329but I didn't want anything that stuck out more. __________________ 2011 335is Black/Oyster. 1 of 46 without moonroof (total of all years): JB4 E50 tune, gone 2013 335i M Sport JB4: Estoril Blue gone 2018 M4 ZCP: current 2023 X3M Comp: current
	Appreciate 0 Quote

02-10-2021, 10:27 PM	#31
ONEof500 First Lieutenant 165 Rep 354 Posts Drives: 2017 M3 30 Jahre Join Date: Feb 2016 Location: California iTrader: (0)	Two questions Do they have to be cut to fit around the jack points? Is the clear coat holding up?
	Appreciate 0 Quote

03-11-2021, 10:30 PM	#34
sna66 Captain 508 Rep 763 Posts Drives: F83 Join Date: May 2014 Location: South FL iTrader: (0)	I got these as well, but the screws seem to be too long, did you guys have to use shorter screws?
	Appreciate 0 Quote

03-12-2021, 12:13 PM	#35
IRNM3 Private 75 Rep 78 Posts Drives: 18 BMW F80 M3 Join Date: Feb 2021 Location: Miami iTrader: (0)	How do the carbon weaves compare to the m. performance? Will it look the same?
	Appreciate 0 Quote

03-13-2021, 07:14 AM	#37
Mrfurious214 Second Lieutenant 92 Rep 290 Posts Drives: 2015 Mineral White M3 Join Date: Jun 2012 Location: Ridgewood, NJ iTrader: (0)	Did anyone get the extended version for the M3? Would love to see pics of how far they stick out
	Appreciate 0 Quote

03-16-2021, 12:59 PM	#38
IRNM3 Private 75 Rep 78 Posts Drives: 18 BMW F80 M3 Join Date: Feb 2021 Location: Miami iTrader: (0)	Figured I'd bump my question. Does the carbon weave match the weave on the stock mirrors and splitter?
	Appreciate 0 Quote

06-29-2022, 10:32 AM	#40
Marioec Private First Class 43 Rep 152 Posts Drives: 2018 BMW M3 ZCP Join Date: Jun 2022 Location: South Florida iTrader: (5)	Is this the one are we talking about ? How is the fit https://www.amazon.com/Repalcement-2...ot_top?ie=UTF8
	Appreciate 1 ericson11254.00 Quote

07-02-2022, 07:13 PM	#41
bmwbrad22 Lieutenant 249 Rep 535 Posts Drives: 18%E2%80%99 M3 Comp Pkg Join Date: Apr 2011 Location: NJ iTrader: (0) Garage List 2018 BMW F80 M3 [10.00]	These are the exact ones I'm going to order, I'm just sorting out a lip issue with a vendor and then ordering I will do a nice right up on them as well, maybe even a video for the forum. : __________________ 2010 Apline White 135i - Sold 2018 Mineral White M3 /// Comp Package
	Appreciate 0 Quote

07-09-2022, 11:44 PM	#42
jeremyuhh Captain 465 Rep 837 Posts Drives: 2015 M3 Join Date: Feb 2016 Location: Canyon Country, CA iTrader: (12)	Pom performance skirts are solid. Wanted an RKP but this sticks out enough and doesn't break the bank. Attached Images
	Appreciate 0 Quote