11-17-2016, 09:07 PM | #23 | |
just a fool
345
Rep 675
Posts |
Quote:
It is a tricky feature. If you adjust your seat manually after power off, it won't work. When the seat is moving after you close the door, if you engage the gearbox, it will stop. But once you get the hang of it, it works great! |
|
Appreciate
1
bb1857868.00 |
11-21-2016, 08:31 PM | #24 | |
Lieutenant Colonel
882
Rep 1,661
Posts |
Quote:
__________________
18' F80 6MT, 991.1s cab PDK, F83 6mt, 996 C4S cab 6mt, F30 328iM 6mt
E60 M5 SMG, E39 M5, E46 M3 cab 6mt, E36 M3 5mt |
|
Appreciate
0
|
11-22-2016, 12:02 PM | #25 |
just a fool
345
Rep 675
Posts |
My understanding is if your driving position is outside the range set by the moving distance parameters, it will not work. Hence the need to play with the coding parameters. I changed the backward movement all the way back, leaving only enough space for my briefcase (as I usually don't have backseat passengers). Also, my driving position isn't very close to the steering wheel.
Hope this helps. |
Appreciate
0
|
11-22-2016, 10:17 PM | #26 |
Major General
2374
Rep 8,364
Posts |
BMW coding is very particular. In addition to what others said, the personalized key profiles can make a difference. Making any manual adjustments can also interrupt movement. Also, some report if electronics are coded to turn off with drivers door opening, it can cause issues.
|
Appreciate
0
|
11-24-2016, 10:57 AM | #27 |
Second Lieutenant
41
Rep 220
Posts |
Got mine working this morning... Put the rear position to 25.5cm and reduced the rear passenger leg distance. Give me plenty of room to get out.
Last edited by lstoker; 11-24-2016 at 02:24 PM.. |
Appreciate
0
|
11-24-2016, 11:53 AM | #28 |
Lieutenant General
2146
Rep 10,176
Posts |
|
Appreciate
0
|
11-24-2016, 11:59 AM | #29 | |
Second Lieutenant
41
Rep 220
Posts |
Quote:
I got that damn clip caught on my Porsche's steering wheel and did a number to the leather. Cost me way too much to replace! Last edited by lstoker; 11-24-2016 at 02:24 PM.. |
|
Appreciate
1
r0wr589.00 |
12-04-2016, 11:48 AM | #30 |
Private
32
Rep 50
Posts
Drives: 2015 M3 MG/BK
Join Date: Mar 2016
Location: Illinois
|
After programming this I ran into the same issues as most on here where it appears to not work. After some reading I gathered I am sitting too far back already using the following values typically used for the programming:
EAH_VERFAHRWEG_SLV_PHYS = 00,28 (40mm)[Default: 00,3C(60mm)] EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = 00,3C (60mm)[Default: 00,64(100mm)] Here is what I went though to set this up for me and my F80 6MT. Reference: http://f80.bimmerpost.com/forums/sho...5&postcount=44 EAH_VERFAHRWEG_SLV_PHYS = The desired move distance(mm) you want the seat to move back. EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = The distance(mm) from all the way back at which the seat will stop, even if the desired move distance has not been reached. How to find your specific values: 1. Move the seat to normal driving position. 2. Measure the amount of exposed rail behind the seat. Note this value and add 1" to this measurement or 25mm. When all the way back the seat extends 1" past the rail end. 3. Manually move seat backwards to desired getting out position. Take measurement again and note this value. After these steps you can calculate out your needed coding values: EAH_VERFAHRWEG_SLV_PHYS = (Value from Step 2) - (Value from Step 3) EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Value from Step 3 (100mm or less, just be mindful of backseat passengers) Distance Values mm Inches Hex 100 3.93701 00,64 90 3.543309 00,5A 80 3.149608 00,50 70 2.755907 00,46 60 2.362206 00,3C 50 1.968505 00,32 40 1.574804 00,28 30 1.181103 00,1E 20 0.787402 00,14 10 0.393701 00,0A 0 0 00,00 This testing process worked for me after coding variables: 1. Door closed, Seat at driving position, Ignition ON 2. Turn Ignition Off, open door. Seat moves back 3. Close door, Turn Ignition ON. Seat moves up Hope this helps someone out. FEM_BODY Module: Easy Entry Seat (Also needs SM Module Coding): 30C0 EINSTIEGSH_LN_AKTIV set to: aktiv 30C0 EINSTIEGSH_NG_AKTIV set to: aktiv 30C0 PRIO_ACHSEN set to: 1 or 2 SM (6d) MODULE: Easy Entry Seat (Also needs FEM_BODY Module Coding): 3000 EINAUSSTIEGSHILFE set to: Modus_FA_SLV 3012 EAH_VERFAHRWEG_SLV_PHYS werte = 00, 3C (60mm) 3012 EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS werte = 00, 0F (15mm) |
Appreciate
6
|
12-11-2016, 03:07 PM | #31 |
Major
342
Rep 1,352
Posts
Drives: 2018 M3 CS
Join Date: Oct 2007
Location: Franklin, TN
|
Any clue if there is a way to code this to move reward on ignition off instead of door open?
__________________
2018 M3 CS F80 l SMB l EXEC
2020 X5 M50i G05 l MW l BLACK l PREM l DHP l 22” l PARK l EXT S-LINE l LASER l TH l AG |
Appreciate
0
|
12-12-2016, 10:59 AM | #32 |
just a fool
345
Rep 675
Posts |
I push one of the seat memory buttons to move the seat back. That way, I can stretch out in the car when waiting for someone. Plus, I've coded radio-off upon exit, so I don't want to open the door.
|
Appreciate
0
|
12-14-2016, 04:05 PM | #33 |
Major
913
Rep 1,427
Posts |
|
Appreciate
0
|
12-15-2016, 12:29 PM | #34 |
Lieutenant
119
Rep 512
Posts
Drives: 2020 Z4 M4Misano Blue
Join Date: Apr 2008
Location: New Hampshire & Cozumel, Mexico
|
I had mine working, then I managed to code some things successfully that had previously not worked for me. Something I did broke this. It clearly is fairly finicky, but it is a nice feature so I think warrants some ongoing effort to get it working.
__________________
2004 E85 Z4 3.0 Sport - Sold to brother | 2004 E83 X3 xDrive3.0i - Gone | 2011 E89 Z4 35is - Gone | 2011 F25 X3 xDrive35i - Gone | 2014 E89 Z4 E89 35is - Gone | 2014 F25 X3 xDrive 30i X3 - Gone | 2017 F83 M4 Cabriolet - Gone | 2017 F25 X3 xDrive30i - Gone
2020 G29 Z4 M40i Misanoblau | 2020 G01 M40i Phytonicblau Casa Suzana, vacation rental villa in Cozumel, Mexico |
Appreciate
0
|
12-02-2017, 01:48 PM | #35 |
///M SubDriver
1833
Rep 2,782
Posts
Drives: 2017 M3, 2020 X7 40i
Join Date: Jul 2016
Location: DMV
|
Bringing this thread back to life to ask a related question to this mod....
I have had this mod for 6 months now and love it (and so do my seats, too ). But I am curious about one thing, when I rode in a 5 Series GT with this feature from the factory, I seem to remember that during engine cranking, the seat would not start moving until after the engine started. In my car with this coded, the split second between when I press the engine start button and the engine starts to crank, the seat moves a small fraction. It then stops during the engine cranking, and then continues to move after the engine is started. So my question is, is there an additional parameter that will cause a "pause" so that the seat won't start to move until the engine is started and running? Having the seat motor start, then stop after a split second during engine cranking, then start again probably is not causing any additional significant wear on the seat motor. But from a smooth operation perspective, it seems to me that it would be best if the seat did not start to move forward until after the engine is started and running.
__________________
///M3 COMPETITION 6MT - 2017 F80 Smoked Topaz Metallic
BM3 / MP-HAS / GC Camber Plates / Carbonstructure Interior X7 XDrive 40i ///M-SPORT - 2020 G07 Arctic Grey Metallic X3 XDrive 30i - 2019 G01 Mineral White (wife's) / 128i 6MT - 2009 E82 Jet Black (son's) |
Appreciate
1
Skyhigh1879.00 |
06-11-2019, 07:23 AM | #36 | |
New Member
14
Rep 25
Posts
Drives: 2014 328i xdrive
Join Date: Jun 2019
Location: London, ON
|
Quote:
I have a 2014 328i. Thank you very much |
|
Appreciate
0
|
09-15-2019, 10:47 AM | #37 | |
Registered
0
Rep 3
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|