GetBMWParts
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > Engine / Drivetrain / Exhaust / Bolt-ons / Tuning

Post Reply
 
Thread Tools Search this Thread
      12-21-2018, 01:24 PM   #45
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by NCThreePedals View Post
I like this option, you do pay what you get for. It is steep though,

All I want is to have a 600rwhp reliable daily,

Great job guys!
Appreciate 0
      12-21-2018, 01:36 PM   #46
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by M3CLESS View Post
What did you do for fuel (port injection, fuel pump?) and tuning to achieve these numbers? I would really like to know how. I have called Motec and they said the only way is to run a dual ecu set up to retain certain stock functions due to the flexray protocol in the car.
All of our beta vehicles have the Fue-It PI installed with in tank pump upgrade. Also, the PI is being controlled with the Split Second controller. Motec is a great tuning platform, however it's not needed to achieve these numbers or beyond on the S55. The BM3 and Fuel-It PI will easily support these horsepower figures on E85.
Appreciate 0
      12-21-2018, 01:38 PM   #47
M3CLESS
Second Lieutenant
United_States
20
Rep
235
Posts

Drives: 2016 MW/SO M3
Join Date: Apr 2015
Location: Chi

iTrader: (0)

Quote:
Originally Posted by Sales@KRATOS View Post
Quote:
Originally Posted by M3CLESS View Post
What did you do for fuel (port injection, fuel pump?) and tuning to achieve these numbers? I would really like to know how. I have called Motec and they said the only way is to run a dual ecu set up to retain certain stock functions due to the flexray protocol in the car.
All of our beta vehicles have the Fue-It PI installed with in tank pump upgrade. Also, the PI is being controlled with the Split Second controller. Motec is a great tuning platform, however it's not needed to achieve these numbers or beyond on the S55. The BM3 and Fuel-It PI will easily support these horsepower figures on E85.
How about running vp import (race gas) i would be very interested in talking to you about some upgrades
Appreciate 0
      12-21-2018, 02:35 PM   #48
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by M3CLESS View Post
How about running vp import (race gas) i would be very interested in talking to you about some upgrades
We've never tried to maximize power output on the stock fuel system with our turbos using VP Import fuel. Being that the price of VP Import is so high, it's not a fuel most customers would consider using on a daily basis unlike E85. If you have any other technical questions, please feel free to e-mail us at info@asrkratos.com with your contact information and someone from our staff will reach out to you. Expect a response after Wednesday of next week as we will be closed for the Christmas holiday.

Last edited by Sales@KRATOS; 12-21-2018 at 03:13 PM.
Appreciate 0
      12-22-2018, 04:01 PM   #49
RSXDC5
Lieutenant
RSXDC5's Avatar
147
Rep
511
Posts

Drives: M3
Join Date: Sep 2012
Location: Scottsdale, AZ

iTrader: (0)

Quote:
Originally Posted by Sales@KRATOS View Post
All of our beta vehicles have the Fue-It PI installed with in tank pump upgrade. Also, the PI is being controlled with the Split Second controller. Motec is a great tuning platform, however it's not needed to achieve these numbers or beyond on the S55. The BM3 and Fuel-It PI will easily support these horsepower figures on E85.
Xtreme-DI has a HPFP upgrade coming out for the S55 in Q1 2019...should make fueling woes a little easier to resolve vs a whole PI setup.
Appreciate 1
      12-23-2018, 12:29 AM   #50
whoop_ass
Captain
whoop_ass's Avatar
305
Rep
655
Posts

Drives: non
Join Date: Apr 2013
Location: On Earth

iTrader: (0)

Quote:
Originally Posted by RSXDC5 View Post
Xtreme-DI has a HPFP upgrade coming out for the S55 in Q1 2019...should make fueling woes a little easier to resolve vs a whole PI setup.
I am huge fan of keeping things simple and would opt for the higher flow HPFP.
but, we need 2 and it's going be expensive

but they have had good results with n55 and XD-I pumps with PS2
really looking forward to more results and test on these turbos when more people test them.
they do seem to flow very well for sure.
Appreciate 0
      12-23-2018, 01:58 PM   #51
CAOZKAN
First Lieutenant
61
Rep
392
Posts

Drives: Austin Yellow M4
Join Date: Sep 2015
Location: Istanbul

iTrader: (0)

Quote:
Originally Posted by whoop_ass View Post
Quote:
Originally Posted by RSXDC5 View Post
Xtreme-DI has a HPFP upgrade coming out for the S55 in Q1 2019...should make fueling woes a little easier to resolve vs a whole PI setup.
I am huge fan of keeping things simple and would opt for the higher flow HPFP.
but, we need 2 and it's going be expensive

but they have had good results with n55 and XD-I pumps with PS2
really looking forward to more results and test on these turbos when more people test them.
they do seem to flow very well for sure.
Sorry if this is a stupid question but I was wondering if one get these HPFPs, will it let the car make more power with the same octane rating?
Appreciate 0
      12-23-2018, 06:36 PM   #52
chetrickerman
Evo Pro Tuner
chetrickerman's Avatar
United_States
7389
Rep
1,112
Posts

Drives: F80 M3 YMB
Join Date: Jul 2017
Location: Colorado Springs

iTrader: (0)

Garage List
2016 BMW M3  [0.00]
Quote:
Originally Posted by CAOZKAN View Post
Sorry if this is a stupid question but I was wondering if one get these HPFPs, will it let the car make more power with the same octane rating?
It just flows more fuel
__________________
Essex/AP 9668 BBK, AR design downpipes, Custom charge pipes, custom intakes, BM3, Awron DGA, RW Carbon GTS hood, Status Gruppe Carbon CSL trunk, Carbon rear diffuser, AutoTecknic Carbon mirrors, Ground Control Camber plates, KW HAS, SS Brake Lines, UUC SSK, Ozmo titanium lugs, BC Forged RZ01
Appreciate 0
      12-23-2018, 08:11 PM   #53
GORDON.M3
Lieutenant Colonel
GORDON.M3's Avatar
Canada
527
Rep
1,675
Posts

Drives: E92 M3
Join Date: Dec 2013
Location: LAX/YYZ/HKG

iTrader: (7)

That TI compressor wheel is amazing, the beauty of machining!
__________________
DINAN | EVOSPORT | VAC | ARP | RD SPORT | NEEZ | EIBACH | CSF
Appreciate 0
      12-26-2018, 11:01 AM   #54
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by whoop_ass View Post
I am huge fan of keeping things simple and would opt for the higher flow HPFP.
but, we need 2 and it's going be expensive

but they have had good results with n55 and XD-I pumps with PS2
really looking forward to more results and test on these turbos when more people test them.
they do seem to flow very well for sure.
Yes, KRATOS engineers designed the KRAS55Bi to flow and support 850whp before reaching the limit of the factory MAP sensor of approximately 36psi. The dyno numbers posted in our press release are limited to a stock engine at 32psi and continue to climb at even 7500rpm. That being said, 850whp with a built engine is very much achievable with the KRAS55Bi. One of our in house beta test vehicles is currently going through the engine build process, so expect to see max output results for the KRAS55Bi very shortly. Max output results for the KRAS55Ti will be posted shortly thereafter.
Appreciate 2
      12-26-2018, 11:20 AM   #55
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by CAOZKAN View Post
Sorry if this is a stupid question but I was wondering if one get these HPFPs, will it let the car make more power with the same octane rating?
The horsepower figures for pump gas are limited by octane and cooling capabilities rather than a limitation of the stock fuel system. Also, EGT's are significantly higher on pump gas vs. race gas or E85. The is due to the fact that pump gas is a faster and hotter burning fuel and timing needs to be reduced to prevent pre-detonation. As timing is reduced EGT's begin to rise and a happy medium has to be found on the tuning side. Timing has to be reduced enough to prevent pre-detonation and at the same time not allow the EGT's to rise too high. There is no exact figure that works across all engine applications. So, working with an experienced tuner like Halim@HCP is key!
Appreciate 3
whoop_ass305.00
FSociety2857.50

      12-26-2018, 11:25 AM   #56
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by GORDON.M3 View Post
That TI compressor wheel is amazing, the beauty of machining!
We appreciate the positive feedback!
Appreciate 0
      01-03-2019, 01:59 PM   #57
M3CLESS
Second Lieutenant
United_States
20
Rep
235
Posts

Drives: 2016 MW/SO M3
Join Date: Apr 2015
Location: Chi

iTrader: (0)

Quote:
Originally Posted by Sales@KRATOS View Post
Quote:
Originally Posted by M3CLESS View Post
How about running vp import (race gas) i would be very interested in talking to you about some upgrades
We've never tried to maximize power output on the stock fuel system with our turbos using VP Import fuel. Being that the price of VP Import is so high, it's not a fuel most customers would consider using on a daily basis unlike E85. If you have any other technical questions, please feel free to e-mail us at info@asrkratos.com with your contact information and someone from our staff will reach out to you. Expect a response after Wednesday of next week as we will be closed for the Christmas holiday.
Never received that phone cal or response. Still very curious about the tuning aspect of a turbo kit making this much power.
Appreciate 0
      01-07-2019, 03:07 AM   #58
ceedawg
Major
ceedawg's Avatar
414
Rep
1,281
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by Sales@KRATOS View Post
The horsepower figures for pump gas are limited by octane and cooling capabilities rather than a limitation of the stock fuel system. Also, EGT's are significantly higher on pump gas vs. race gas or E85. The is due to the fact that pump gas is a faster and hotter burning fuel and timing needs to be reduced to prevent pre-detonation. As timing is reduced EGT's begin to rise and a happy medium has to be found on the tuning side. Timing has to be reduced enough to prevent pre-detonation and at the same time not allow the EGT's to rise too high. There is no exact figure that works across all engine applications. So, working with an experienced tuner like Halim@HCP is key!
Will you guys be designing turbos and manifolds for the N55?
Great points you make in this thread as I am very familiar with the potential ill's of using the Pureturbo design concept on the N55 engines. This thread is timely
Just to repeat All the points made in this thread by Kratos is why I never considered using a Pure turbo setup on my N55 powered car.

Last edited by ceedawg; 01-07-2019 at 04:04 PM.
Appreciate 0
      01-07-2019, 09:51 AM   #59
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by M3CLESS View Post
Never received that phone cal or response. Still very curious about the tuning aspect of a turbo kit making this much power.
We just wanted to clarify that we were closed for the holidays, but one of our engineers did reach out to someone by the name of Kyle last week and discussed different aspects of our turbo systems. Was that you, please advise?

Last edited by Sales@KRATOS; 01-07-2019 at 10:07 AM.
Appreciate 0
      01-07-2019, 10:06 AM   #60
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by ceedawg View Post
Will you guys be designing iturbos and manifolds for the N55?
Great points you make in this thread as I am very familiar with the potential ill's of using the Pureturbo design concept on the N55 engines. This thread is timely
Just to repeat All the points made in this thread by Kratos is why I never considered using a Pure turbo setup on my N55 powered car.
We appreciate the positive feedback, however since the N55 is discontinued it wouldn't be conducive to our business model as a manufacturer to produce a turbo system for that platform. Although, we are currently designing turbo systems for other BMW platforms as well as a turbo system for the McLaren 720S (M840T) and a recently completed turbo system for the MB AMG M177/M178.
Appreciate 0
      01-07-2019, 06:29 PM   #61
M3CLESS
Second Lieutenant
United_States
20
Rep
235
Posts

Drives: 2016 MW/SO M3
Join Date: Apr 2015
Location: Chi

iTrader: (0)

Quote:
Originally Posted by Sales@KRATOS View Post
Quote:
Originally Posted by M3CLESS View Post
Never received that phone cal or response. Still very curious about the tuning aspect of a turbo kit making this much power.
We just wanted to clarify that we were closed for the holidays, but one of our engineers did reach out to someone by the name of Kyle last week and discussed different aspects of our turbo systems. Was that you, please advise?
That was me. Thank you so much for the talk and it was very informative. I spoke with HCP about a custom tune with safe guards. I am super pumped for the Titanium Kit.
Appreciate 0
      01-09-2019, 09:59 AM   #62
Sales@KRATOS
BimmerPost Supporting Vendor
Sales@KRATOS's Avatar
143
Rep
70
Posts


Drives: The Spirit of Racing
Join Date: Nov 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by M3CLESS View Post
That was me. Thank you so much for the talk and it was very informative. I spoke with HCP about a custom tune with safe guards. I am super pumped for the Titanium Kit.
Great, we just wanted to make sure everyone was being responded to in a timely manner and that no one was being left unanswered. We're pretty pumped about the release of our KRAS55Ti's as well! Our KRAS55Bi systems will start shipping by the end of this month and KRAS55Ti's will follow shortly thereafter.
Appreciate 1
ssgm1x135.00

      02-08-2019, 03:28 PM   #63
mad_f87
New Member
United_States
3
Rep
5
Posts

Drives: M2 Competition
Join Date: Nov 2018
Location: NY

iTrader: (0)

Lightbulb

Quote:
Originally Posted by blackey View Post
$8-9K when Pure is $4k, and VTT is $4-5K?

I think you've priced yourself out the market for this chassis.
Mr. Bill, I think you should take a deeper look into these turbos, and how they are different than pure. I honestly dont know much about VTT but all I know is that pure are not great, unless if you are going for their stage 2+.
Additionally, Kratos use higher grade material and ceramic ball bearings which is not found in competitors. If that is not enough, you must realize that they have done this with stock internals thanks to their low back pressure allowing you to run the turbos on 30+ psi without breaking your connecting rods.
For the pricier version you are buying a titanium turbo charger, ever seen one of those for the S55 probably not.
And to end this post with the best part. You dont need to send in your cores, you get to keep them, and the assembly is full bolt on.
Appreciate 2
ssgm1x135.00

      02-08-2019, 06:36 PM   #64
blackey
Mr Bill
94
Rep
349
Posts

Drives: 2015 M3
Join Date: Sep 2013
Location: Aliso Viejo

iTrader: (0)

No doubt it could be a great product, and I'm familiar with the current issues with back pressure in the manifold, and what we are currently getting for ratios between boost and back pressure. Not to mention I just ordered a stage II+ and I've had some missing pieces on their install kit, so there's that. If this does what they say, it looks like it could perform well, although it appears the spool is pretty late.

For my car I'm planning on running without Meth, port injection, or E85 though (road race car), which limits the amount of power / boost you can run. (100 Octane race fuel) I think the issue I see with this option is you'd really need / want to be pushing the envelop pretty hard 30+ psi, (Port injection, built motor, built head to raise spring pressures, etc...) before an $8K turbo setup starts to make sense on a car that's worth 50K on the used market. Maybe it's just me coming from a place that I can buy a new turbo from Garrett and a custom manifold for significantly less. I just think they're going after a pretty razor thin segment of the market with this pricing. Given there isn't a core, but it's not like the used stock turbos are worth much on the market either.

Given if this was a McLaren 720S I'd probably feel differently. It could just be me though! I see all the people buying 8K wheels so there are people that will spend that.

Sorry for the thread hijack.
__________________
2015 M3, Signature 18x10 & 19x11, Apex 18x10&11, Apex 18x10.5 square, Bootmod3 with Cary Tune, VRSF intake, Dinan Exhaust, Dinan chargecooler, Dinan Monoballs, Dinan Toe links, Essex AP 9660 & 9449, MCS doubles (full coilover), Pure Stage II+, StudioRSR rollbar, Hotchkis swaybars, Vargas Crank hub fix, Vargas chargepipes, N54 downpipes
Appreciate 2
blockdoc102.00
ssgm1x135.00

      02-09-2019, 01:21 AM   #65
blockdoc
Private First Class
United_States
102
Rep
173
Posts

Drives: 2015 M4
Join Date: Jul 2018
Location: Santa Barbara, CA

iTrader: (0)

Quote:
Originally Posted by mad_f87 View Post
Mr. Bill, I think you should take a deeper look into these turbos, and how they are different than pure. I honestly dont know much about VTT but all I know is that pure are not great, unless if you are going for their stage 2+.
Additionally, Kratos use higher grade material and ceramic ball bearings which is not found in competitors. If that is not enough, you must realize that they have done this with stock internals thanks to their low back pressure allowing you to run the turbos on 30+ psi without breaking your connecting rods.
For the pricier version you are buying a titanium turbo charger, ever seen one of those for the S55 probably not.
And to end this post with the best part. You dont need to send in your cores, you get to keep them, and the assembly is full bolt on.
So to be clear...the Pure Turbos I just had installed are "not great"? Thank you for that lol. I have more power than I can deal with on a very conservative custom tune. Don't get me wrong, I appreciate the work and R and D yall seem to have put in....but that kinda sucks. The Pure turbos have all the current records...they are clearly a pretty good product. Are the Kratos better??? quite possibly...yes. But is it worth a 4 GRAND difference for the daily driver??? Not being a douche....just throwing this out there

Last edited by blockdoc; 02-09-2019 at 01:29 AM.
Appreciate 1
ssgm1x135.00

      02-09-2019, 01:28 AM   #66
blockdoc
Private First Class
United_States
102
Rep
173
Posts

Drives: 2015 M4
Join Date: Jul 2018
Location: Santa Barbara, CA

iTrader: (0)

Quote:
Originally Posted by blackey View Post
No doubt it could be a great product, and I'm familiar with the current issues with back pressure in the manifold, and what we are currently getting for ratios between boost and back pressure. Not to mention I just ordered a stage II+ and I've had some missing pieces on their install kit, so there's that. If this does what they say, it looks like it could perform well, although it appears the spool is pretty late.

For my car I'm planning on running without Meth, port injection, or E85 though (road race car), which limits the amount of power / boost you can run. (100 Octane race fuel) I think the issue I see with this option is you'd really need / want to be pushing the envelop pretty hard 30+ psi, (Port injection, built motor, built head to raise spring pressures, etc...) before an $8K turbo setup starts to make sense on a car that's worth 50K on the used market. Maybe it's just me coming from a place that I can buy a new turbo from Garrett and a custom manifold for significantly less. I just think they're going after a pretty razor thin segment of the market with this pricing. Given there isn't a core, but it's not like the used stock turbos are worth much on the market either.

Given if this was a McLaren 720S I'd probably feel differently. It could just be me though! I see all the people buying 8K wheels so there are people that will spend that.

Sorry for the thread hijack.


Very well summarized
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 12:38 AM.




f80post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST