Help! Coding IN edc

hhfloss · 03-27-2021, 07:40 PM

F82 owner here and I just installed the stock EDC struts back into the car (removed aftermarket coilovers). Everything is plugged in, module in the trunk is plugged in, and I connected to the car to code in 2VF on esys to restore the EDC and to my surprise 2VF still existed and hadn’t been coded out. Any ideas how else the previous owner could have coded out the EDC without deleting 2VF?? I’m looking for what I need add/restore in the coding for the car to recognize the EDC again.

hhfloss · 03-27-2021, 08:08 PM

Or a referral to a professional remote coder I can hire to help me restore the EDC to the computer would be appreciated, thank you

kubax86 · 03-28-2021, 05:37 AM

You don't need to delete 2VF from FA stored in VCM to code out EDC.
FA was just modified for coding and not saved in VCM.

irunalot · 03-28-2021, 07:09 AM

Kubax86 is your guy for the coding, he's coded my car multiple times.

TopJimmy · 03-28-2021, 09:50 AM

Get help from Kubax. Great guy!
Alex@Alpine can help too. Also great.

You could get all your coding checked and set in one quick shot. Reasonably priced!

coxxoc · 03-28-2021, 12:31 PM

You are just seeing the option because it is customary to not write changes from VO coding to the VCM. If you check the ecu software and settings themselves, you will see the changes.

Redoing the VO coding with with 2VF present will add EDC again. There is a sequence of ECUs that need updated so your buttons and kombi interfaces get the change. Search for diy to add edc or use the coders mentioned above. I used kubax86 for full screen CarPlay before and the experience was great.

hhfloss · 03-28-2021, 04:48 PM

Thank you for the explanations and referrals everyone!

03-27-2021, 07:40 PM	#1
hhfloss Registered 0 Rep 4 Posts Drives: 2015 M4 Join Date: Mar 2021 Location: USA iTrader: (0)	Help! Coding IN edc F82 owner here and I just installed the stock EDC struts back into the car (removed aftermarket coilovers). Everything is plugged in, module in the trunk is plugged in, and I connected to the car to code in 2VF on esys to restore the EDC and to my surprise 2VF still existed and hadn’t been coded out. Any ideas how else the previous owner could have coded out the EDC without deleting 2VF?? I’m looking for what I need add/restore in the coding for the car to recognize the EDC again.
	Appreciate 0 Tweet Quote

03-27-2021, 08:08 PM	#2
hhfloss Registered 0 Rep 4 Posts Drives: 2015 M4 Join Date: Mar 2021 Location: USA iTrader: (0)	Or a referral to a professional remote coder I can hire to help me restore the EDC to the computer would be appreciated, thank you
	Appreciate 0 Quote

03-28-2021, 05:37 AM	#3
kubax86 BimmerPost Supporting Vendor 1776 Rep 3,051 Posts Drives: M2 Join Date: Jul 2017 Location: World iTrader: (8)	You don't need to delete 2VF from FA stored in VCM to code out EDC. FA was just modified for coding and not saved in VCM. __________________ Apple CarPlay Fullscreen for NBTEVO / ENTRYNAV2 / Anti-Dazzle F/G CS FLASH G8X /GTS FLASH F8X / F8X Ultimate PACK / NBTEVO iDrive 6 FLASH iDrive Firmware Update + CarPlay Fullscreen -> Video Process Visit BIMMER-REMOTE.com - 10% OFF with BIMMERPOST_10 promocode info@bimmer-remote.com or PM
	Appreciate 0 Quote

03-28-2021, 07:09 AM	#4
irunalot Captain 1517 Rep 820 Posts Drives: Porsche Carrera S Join Date: Oct 2020 Location: Miami iTrader: (0)	Kubax86 is your guy for the coding, he's coded my car multiple times.
	Appreciate 0 Quote

03-28-2021, 09:50 AM	#5
TopJimmy Major General 5445 Rep 5,137 Posts Drives: 2023 M3 Comp xDrive Join Date: Jul 2019 Location: Chester County, PA iTrader: (5)	Get help from Kubax. Great guy! Alex@Alpine can help too. Also great. You could get all your coding checked and set in one quick shot. Reasonably priced! __________________ '18 F80 Base 6MT \| '19 F82 Exec DCT \| '18 F82 Comp Exec DCT \| '23 G80cx
	Appreciate 1 fiveohwblow3633.00 Quote

03-28-2021, 12:31 PM	#6
coxxoc Private First Class 120 Rep 134 Posts Drives: 2017 M3 CP Join Date: Oct 2018 Location: Seattle iTrader: (1)	You are just seeing the option because it is customary to not write changes from VO coding to the VCM. If you check the ecu software and settings themselves, you will see the changes. Redoing the VO coding with with 2VF present will add EDC again. There is a sequence of ECUs that need updated so your buttons and kombi interfaces get the change. Search for diy to add edc or use the coders mentioned above. I used kubax86 for full screen CarPlay before and the experience was great.
	Appreciate 1 kubax861775.50 Quote

03-28-2021, 04:48 PM	#7
hhfloss Registered 0 Rep 4 Posts Drives: 2015 M4 Join Date: Mar 2021 Location: USA iTrader: (0)	Thank you for the explanations and referrals everyone!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search