04-23-2018, 06:19 PM | #23 |
Brigadier General
1593
Rep 3,945
Posts
Drives: 2015 M4 MG/SO
Join Date: Mar 2014
Location: MTL, QC
|
Honestly, I don't know much about TPMS retrofit in Canadian cars, except I know what needs to be coded when I looked it at it few years ago. I do not have TPMS retrofit in my car and don't really care about it as I check my tire pressure weekly. You can read and learn about the various systems in our cars using ISTA. Google to get it, GL.
|
Appreciate
0
|
05-21-2019, 08:54 PM | #25 | |
Private
14
Rep 67
Posts |
TPMS Retrofit coding available
Quote:
You can download the pdf instructions linked below, but do it in reverse: https://f30.bimmerpost.com/forums/sh...8&postcount=24 Cheers |
|
Appreciate
0
|
10-28-2020, 01:59 PM | #26 |
New Member
0
Rep 18
Posts |
Please tell me where am I going wrong
FEM RC_RDC_ENABLE = aktiv ICMQL IcmKod_B_S2VBA = verbaut DSC C_Funktion_RDCi_l = aktiv C_Funktion_RPA_e = nicht_aktiv C_RPA_Extra = nicht_aktiv HU_NBT RDC = aktiv RDC_DRUCK_TEMP = druk_und_temperatur RDC_FORTSCHRITTSANZEIGE = nicht_aktiv REIFENUEBERWACHUNG_RDC_RPA = rdc RPA = nicht_aktiv KOMBI ST_TYR_RDC_ALIVE = aktiv ST_TYR_RDC_TIMEOUT = aktiv KOMBI DSC_MIT_RPA = ohne_RPA |
Appreciate
0
|
10-23-2021, 08:31 PM | #29 |
Private
26
Rep 88
Posts |
|
Appreciate
0
|
10-24-2021, 09:31 AM | #30 |
Private First Class
60
Rep 145
Posts |
|
Appreciate
0
|
10-24-2021, 10:40 AM | #31 | |
Private
26
Rep 88
Posts |
Quote:
Suppose, the full FDL changes can be found here https://f80.bimmerpost.com/forums/sh...4&postcount=72 About the part number, there are many that works, I just got a set from the forum (from the US) so not sure if I can help you there...sorry! |
|
Appreciate
1
F82 in QC60.00 |
10-24-2021, 07:57 PM | #32 | |
Private First Class
60
Rep 145
Posts |
Quote:
|
|
Appreciate
0
|
12-01-2021, 05:57 PM | #34 | |
Private First Class
60
Rep 145
Posts |
Quote:
so I installed tpms sensor,added 2VB and coded all modules but its not reading pressure at all,i drove for 20 mins already am i missing something? |
|
Appreciate
0
|
12-02-2021, 08:09 PM | #35 | |
Private First Class
60
Rep 145
Posts |
Quote:
|
|
Appreciate
0
|
04-21-2023, 03:30 PM | #36 |
Private First Class
121
Rep 156
Posts |
Anyone in Toronto able to do this VO code of 2VB for me?
I just got a set of sensors installed in my F15 and thought I could code this using Bimmercode but it doesn’t have the correct coding options, not even in expert mode.. |
Appreciate
0
|
04-23-2023, 11:45 PM | #37 |
Enlisted Member
8
Rep 31
Posts |
Not sure where you’re currently at with this…
I have a 2019 CS and I went with aftermarket tpms on my new set of wheels. What I have done is I copied the TPMS code that were on the OEM set of wheels onto the new TPMS (non-OEM). I believe each of the 4 wheels has a specific code. It ended up working fine for my car. Or alternatively, you could have it completed deleted so it doesn’t give you a TPMS malfunction warning every single time. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|