eBay product ratings thread

[///M4ster Yoda]

Originally Posted by MakeMuricaGreat

Let us know how it turns out and be sure to post your feedback in the thread!

Without BreakTraction having posted his review and feedback, I wouldn't have found & pulled the trigger on one.

Will do. I'm gonna order later today. According to the site it's gonna take a few weeks to get here. Hoping it comes a little sooner. I'm picking up my new 2020 M4 in 3 weeks and wanted to install it right away.

[BoostinChick]

Originally Posted by ///M4ster Yoda

Will do. I'm gonna order later today. According to the site it's gonna take a few weeks to get here. Hoping it comes a little sooner. I'm picking up my new 2020 M4 in 3 weeks and wanted to install it right away.

I ordered the same one as BreakTraction and currently on day-30 of waiting. The vendor said they were 20-units behind when I pinged them 2-3 weeks ago for a status update. Almost sounded like these were made to order not done in batches to carry inventory. The EMS record states it should be here this week. I didn't notice any bowing on the pictures BreakTraction posted, so even if it's only noticeable during install, still well worth the $300.

[///M4ster Yoda]

Originally Posted by BoostinChick

I ordered the same one as BreakTraction and currently on day-30 of waiting. The vendor said they were 20-behind 2-3 weeks ago when I asked for a status update. Almost sounded like these were made to order not by batches. The EMS record states it should be here this week. I didn't notice any bowing on the pictures BreakTraction posted, so even if it's only noticeable during install, still well worth the $300.

Is this the one you ordered?

https://m.aliexpress.com/item/328154...chweb201603_51

[BoostinChick]

Originally Posted by ///M4ster Yoda

Is this the one you ordered?

https://m.aliexpress.com/item/328154...chweb201603_51

If you see BreakTraction's review in there, then that is the one I ordered.

Anyone find an AliExpress version of the GTS carbon fiber seat back covers with the stripe?

[OGMthree4real]

Originally Posted by BoostinChick

If you see BreakTraction's review in there, then that is the one I ordered.

Anyone find an AliExpress version of the GTS carbon fiber seat back covers with the stripe?

one please!

[danchee]

Bought this one - https://www.ebay.com/itm/Performance...53.m2749.l2649

The CF is thin but it's a splitter that is stuck on existing bumper, so it doesn't need to be thick. Fits perfectly and it comes with tape and a primer that you apply to make the surface of your bumper stickier for the adhesive tape.

[Sir Loin]

Originally Posted by BoostinChick

Anyone find an AliExpress version of the GTS carbon fiber seat back covers with the stripe?

Oooh! I would like a set of these.

[BoostinChick]

Originally Posted by BoostinChick

I ordered the same one as BreakTraction and currently on day-30 of waiting. The vendor said they were 20-units behind when I pinged them 2-3 weeks ago for a status update. Almost sounded like these were made to order not done in batches to carry inventory. The EMS record states it should be here this week. I didn't notice any bowing on the pictures BreakTraction posted, so even if it's only noticeable during install, still well worth the $300.

Mine finally arrived! Packaged really well and no damage. From an initial assesment, I do see some areas of imperfection - very very very slightly around an edge or two. I ceramic coated it and will install it this weekend and write-up a full review.

[sna66]

Originally Posted by JoePcone

I took a chance on this diffuser and it's pretty much perfect

https://www.amazon.com/jcsportline-C...eb_11061428011

hi Joe.. thanks for the video i'm considering this piece, what front lip do you have?

[BoostinChick]

Vehicle: M3
Part: Vorsteiner Style Rear Diffuser w/ Bumper Accents
Brand: HSPEED KSLINE on AliExpress
AliExpress Link
Fitment (Poor)1-10(Best), Reason for Score: 8

Mine arrived with a few small imperfections and seemed to scratch pretty easily. I still ceramic coated and installed it. I didn't notice any center bowing, but I do not like how the middle clips don't sit into the factory location really well. Mine seem to be straight versus OEM that angles up to latch into the stock location. The 2-bolts on the outside seem to keep the diffuser in place, though.

The side pieces fit decent. There is a small gap between the bumper extensions/side pieces and the diffuser. I tried a few times to re-align, but as soon as I adjust them to line up with the bumper it pulls away slightly. For the money - I like it a lot. If it gets destroyed in a couple months/years there are now 1-piece V-style diffusers out there I can try out.

[///M4ster Yoda]

Can anyone recommend a seller for an F82 M4 CS trunk spoiler?

IND wants $1000. Screw that noise

[longlasting]

Originally Posted by BoostinChick

Vehicle: M3
Part: Vorsteiner Style Rear Diffuser w/ Bumper Accents
Brand: HSPEED KSLINE on AliExpress
AliExpress Link
Fitment (Poor)1-10(Best), Reason for Score: 8

Mine arrived with a few small imperfections and seemed to scratch pretty easily. I still ceramic coated and installed it. I didn't notice any center bowing, but I do not like how the middle clips don't sit into the factory location really well. Mine seem to be straight versus OEM that angles up to latch into the stock location. The 2-bolts on the outside seem to keep the diffuser in place, though.

The side pieces fit decent. There is a small gap between the bumper extensions/side pieces and the diffuser. I tried a few times to re-align, but as soon as I adjust them to line up with the bumper it pulls away slightly. For the money - I like it a lot. If it gets destroyed in a couple months/years there are now 1-piece V-style diffusers out there I can try out.

thanks for the review. How is the quality of the carbon?

[Boostin FD]

All these eBay/aliexpress diffusers jumped in price... must be these reviews.

[JoePcone]

Originally Posted by sna66

hi Joe.. thanks for the video i'm considering this piece, what front lip do you have?

Originally Posted by sna66

hi Joe.. thanks for the video i'm considering this piece, what front lip do you have?

OEM M performance lip with the Autotechnik splitters.

[MakeMuricaGreat]

BoostinChick -- looks great! Congratulations.

[jd__m4]

I purchased this CF ebrake handle on a whim and the quality is surprisingly good for the price:

https://www.aliexpress.com/item/3296...7c454c4dWwnI55

[MakeMuricaGreat]

• Vehicle: M4
• Part: Carbon Fiber Replacement DCT Knob Cover
• Brand: eBay Vendor - mhestore2009
• eBay Link: Here
• Item List Price: $72.20
• Item Price Paid: $66.00 via 'Make Offer'.
• Shipping Price/Shipping Speed: Arrived within ten days.
• Item Location: China
• Fitment (Poor)1-10(Best): 10.
• Reason for Score:
  Installation was straightforward and simple thanks to the IND DIY Guide. Took all of maybe ten minutes to complete.
  No noticeable gap, feels like OEM, and it fits snug and secure.
• Quality (Poor)1-10(Best): 10.
• Reason for Score:
  The weave is excellent, clear coat is smooth and even, and everything lines up excellently.
  
  

Will provide pictures later today.

[Cboy]

Originally Posted by MakeMuricaGreat

• Vehicle: M4
• Part: Carbon Fiber Replacement DCT Knob Cover
• Brand: eBay Vendor - mhestore2009
• eBay Link: Here
• Item List Price: $72.20
• Item Price Paid: $66.00 via 'Make Offer'.
• Shipping Price/Shipping Speed: Arrived within ten days.
• Item Location: China
• Fitment (Poor)1-10(Best): 10.
• Reason for Score:
  Installation was straightforward and simple thanks to the IND DIY Guide. Took all of maybe ten minutes to complete.
  No noticeable gap, feels like OEM, and it fits snug and secure.
• Quality (Poor)1-10(Best): 10.
• Reason for Score:
  The weave is excellent, clear coat is smooth and even, and everything lines up excellently.
  
  

Will provide pictures later today.

does the CF match the interior? same glossy finish?

[jd__m4]

Originally Posted by eyeamgrewt

I received mine this weekend, unfortunately I won't have my M3 for another couple weeks as it's in for repairs.

I definitely see the bowing in the middle that MakeMuricaGreat highlighted, I also spotted a couple of small imperfections in the CF. Nothing too bad and I doubt I'll notice them once it's mounted. I'll update with pics and such when I get my car back and install it.

Installing this now, unfortunately it's pretty bowed and looks like shit. The side extensions also seem bowed and don't like up good at all. I'll be contacting the seller.

[///M4ster Yoda]

Originally Posted by eyeamgrewt

Installing this now, unfortunately it's pretty bowed and looks like shit. The side extensions also seem bowed and don't like up good at all. I'll be contacting the seller.


[IMG]

View post on imgur.com

[/IMG]

[IMG]

View post on imgur.com

[/IMG]

Damn. The side extensions are way off

[jd__m4]

Originally Posted by ///M4ster Yoda

Damn. The side extensions are way off

There's a good 1/2" gap between the side extensions and the diffuser, too. Overall this thing is a terrible fit, I took it off and put stock back on. Waiting to hear back from the vendor.

[///M4ster Yoda]

Originally Posted by eyeamgrewt

There's a good 1/2" gap between the side extensions and the diffuser, too. Overall this thing is a terrible fit, I took it off and put stock back on. Waiting to hear back from the vendor.

Shit. That sucks. Is it from Aliexpress?