[Audio Coding] Replacing HK Logic7 DSP with B&O "Expanded" DSP

[cossie1]

Originally Posted by cossie1

My 2015 M4 with HK, had B&O coded when I bought it.

Yesterday I had the software updates done by the stealer so on the latest software.

Just been to recode the car with B&O but after coding it, the menu's still only has the Logic 7 option on the i-drive.

Anyone have any idea's why I am not seeing B&O ?

No idea what the issue was, connected e-sys to it again today and the coding hadn't taken (even though when I rechecked the other night it was showing as coded to B&O).

Now recoded it again and it's working as it should

[manyaksh]

I have installed B&O Amp in my F06 which came with 677. I have tried everything but there is no sound.

connected HK Speaker connector A236*1B 1to1 its same
A236*3B has tweeter connections, ASD and Pin No. 17 for activation of the Amp.

Please help.

[SoundQ2]

Originally Posted by packetpilot

Coding the following:

HU_NBT or HU_NBT2 > HMI 3000 > HIGH_END_AUDIO_MENUE = volle_insz

..will replace HK Logic7 with B&O DSP. I have this in a newly-included packetpilot.xml cheat code:

What WAS the original "HU_NBT or HU_NBT2 > HMI 3000 > HIGH_END_AUDIO_MENUE = XXXXXX"?

I changed it yesterday but want to change it back and see if I can tell the difference.

But like you mentioned in a previous post, there MAY be OTHER HK DSP things that were not changed.

The DISPLAY now says something else rather than HK but is it really?

Thanks!