F82 M4 wheel Questions :)

[Haruxxi88]

Hello Guys
I’m looking for new shoes for my F82 M4
I want deep dish style and my final decisions :
Work VS XX or VS Edition
Front 9.5+30
Rear 10.5+30
OR
Work M1 3P
9.5J+20
10.5J+32
Please correct me if I need better size to have that look!
I want to keep stock as possible but if I have to put spacer or do suspension I’ll consider it as well

OR SSR or BBS if you guys can recommend me any?

I attached photo (the look that I’m going for. I don’t want to go too low as I’ll be locate in South Korea soon)

[BigFatRaccoon]

Originally Posted by Haruxxi88

9.5J+20
10.5J+32

More info is needed. What tire sizes do you plan on running? Are you lowered?

20 and 32 is very aggressive. For reference I'm working with a wheel company right now and they recommended for an aggressive but flush setup:

F: 19x9.5 ET +22 on 265/35/19
R: 19x10.5 ET +35 on 285/35/19

[M3SQRD]

I’ll second the:

9.5et20-22 front with a 265 or 275 tire
10.5et35 rear with a 285 or 295 tire

The 9.5et30 front would need a 7.5-10 mm thick spacer.
The 10.5et30 rear is a tiny bit too aggressive. You’ll probably rub with a 295 especially a 200TW 295 tire (which can be as wide as a 305).

[Haruxxi88]

Thanks for reply

I’m planning to put KW V3 although if I can keep stock sus, I would like to.
I heard for the front if I go for 19, it will get disturbed with break? Is that true? Should I go for 20 inch for front and back? If so what spec should I go for with out spacer and max aggressive offset look with out touching fender and break for front and back??
But if I need to mod suspension I’ll do it

[BigFatRaccoon]

Originally Posted by M3SQRD

I’ll second the:

9.5et20-22 front with a 265 or 275 tire
10.5et35 rear with a 285 or 295 tire

The 9.5et30 front would need a 7.5-10 mm thick spacer.
The 10.5et30 rear is a tiny bit too aggressive. You’ll probably rub with a 295 especially a 200TW 295 tire (which can be as wide as a 305).

Fully agree with you, I'm pretty sure I saw a thread where someone tried to run that rear wheel offset with a 295/35 and said it doesn't clear, but a 295/30 or 285/35 does, and the front wheel offset can easily be +ET25 or +ET20 to avoid needing to run a spacer from the get-go.

I really love my 285/35/19 rears and was told by the wheel company to not go anything under +ET35 or +ET34 to enjoy it.

[M3SQRD]

Originally Posted by BigFatRaccoon

Sidewall is also important here to specify.

Based off what I've seen on threads, a 295/35 won't clear the rears on that setup but a 295/30 will. I personally like the 285/35 look/fitment more.

Yes but the question was asking about offsets. I didn’t specify the sidewall because it should be selected to minimize the difference in rolling diameter wrt stock rolling diameter. However, I could get a 295/35 to fit without rubbing.