02-04-2025, 05:38 PM | #3 |
Private First Class
![]() 338
Rep 173
Posts |
ApexBuilt has OEM style or front mount if you want that. https://www.shopapexbuilt.com/
|
Appreciate
1
betoa850.00 |
02-05-2025, 06:58 AM | #9 |
Major General
![]() ![]() 4673
Rep 8,203
Posts |
I also used Eventuri intakes with no CEL. The rough idle at startup is due to the cross-sectional area of the intake where the MAF sensor is located is different from the oem intake cross-sectional area. The rough idle gets worse if you code out the cold startup and if you don’t wait 30 sec before touching the throttle, it’ll feel like the car is going to stall badly.
|
Appreciate
1
betoa850.00 |
02-05-2025, 08:41 AM | #12 |
Captain
![]() ![]() ![]() ![]() ![]() 933
Rep 791
Posts |
Ran project gamma front mount intakes for 1 year. No CEL. Occasional cold start rpm flutter in the winter specifically. Sounds loud from outside.
Once ran MST intakes. They were good and the heat shield they include keeps the CEL away. Only issue was rubbing aftermarket charge pipes.
__________________
?18 M4 Comp
Last edited by HotRodM4; 02-05-2025 at 08:43 AM.. |
Appreciate
1
betoa850.00 |
02-05-2025, 10:45 AM | #14 |
New Member
3
Rep 17
Posts |
Anyone here have removed their charcoal filters on the oem airboxes? I've heard it gives you more induction noise without replacing it with a set of aftermarket intakes.
|
Appreciate
0
|
02-05-2025, 11:45 AM | #15 |
BimmerPost Supporting Vendor
![]() 29055
Rep 199,480
Posts ![]() |
lots of good brands that wont trigger the check engine light, you need to first start by setting a budget and a goal on what kind of intake you want (stock location vs front mount, closed vs open , aluminum vs carbon,etc..)
check out our website (link in the signature) we offer a lot of different options for all budgets
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 ![]() |
Appreciate
1
betoa850.00 |
02-05-2025, 02:03 PM | #16 |
BimmerPost Supporting Vendor
3613
Rep 7,148
Posts ![]() |
__________________
![]() Performance Parts For Your Bmw At Crazy Low Prices! 5% OFF Code "BimmerPost" Email: info@mad-us.com |
Appreciate
1
betoa850.00 |
02-05-2025, 03:40 PM | #17 | |
Registered
0
Rep 5
Posts |
Quote:
|
|
Appreciate
0
|
02-05-2025, 04:47 PM | #18 |
BimmerPost Supporting Vendor
![]() 29055
Rep 199,480
Posts ![]() |
no budget, get the Infinity design intake
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 ![]() |
Appreciate
1
betoa850.00 |
02-06-2025, 01:10 AM | #19 | |
Registered
0
Rep 5
Posts |
Quote:
|
|
Appreciate
0
|
02-06-2025, 04:18 AM | #20 |
Private First Class
![]() 222
Rep 196
Posts |
|
Appreciate
0
|
02-06-2025, 09:26 AM | #21 |
BimmerPost Supporting Vendor
![]() 29055
Rep 199,480
Posts ![]() |
Cant go wrong with RK Tunes
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 ![]() |
Appreciate
0
|
02-06-2025, 09:56 AM | #22 |
Captain
![]() ![]() ![]() ![]() 780
Rep 762
Posts |
Yes, I did this on my 2018 F80 Competition. It allowed more turbo spool sound but by and large was still only really audible when the engine was set to Sport Plus mode. I have since switched to the CTS Turbo open element intake setup which has a plenty of turbo spool sound in all engine modes. When it comes time to clean and re-oil the open element filters (and the downtime waiting for the oil to dry....) I may revisit this decision.
__________________
2018 ///M3 Competition 6MT Mineral Grey
2023 X3 ///M40i Brooklyn Grey |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|