M2cs racing wheels

[The_Werm]

Has anyone tried the 513m from the m2cs racing? They are very cheap and look awesome.

10.5 x 18 et46 would these fit with spacer in front/rear? Thanks!

Part # 36-10-8-324-178

[stevehifi]

Originally Posted by The_Werm

Has anyone tried the 513m from the m2cs racing? They are very cheap and look awesome.

10.5 x 18 et46 would these fit with spacer in front/rear? Thanks!

Part # 36-10-8-324-178

Sounds interesting but the offset is terrible. Probably need a 5mm spacer in the rear and 25-30mm spacer in the front. You'll also have to run a 25.5" tire to prevent rubbing in front.

[kaiv]

FWIW, the M2 CS Racing runs 41mm front spacers (36008328080) and 16mm rear spacers (36008328081).

[The_Werm]

Originally Posted by kaiv

FWIW, the M2 CS Racing runs 41mm front spacers (36008328080) and 16mm rear spacers (36008328081).

Why does bmw Motorsport run such large spacers? Is there any disadvantage? If I got these wheels I would run a square setup with slicks.

[The_Werm]

Originally Posted by stevehifi

Sounds interesting but the offset is terrible. Probably need a 5mm spacer in the rear and 25-30mm spacer in the front. You'll also have to run a 25.5" tire to prevent rubbing in front.

So I could run these wheels with large spacer in front and 27/65/18 Michelin slick?

[FaRKle!]

Originally Posted by The_Werm

Why does bmw Motorsport run such large spacers? Is there any disadvantage? If I got these wheels I would run a square setup with slicks.

To get the proper offset and clearance to the strut. The inside of the rim of the motorsports wheel with spacer sits 5mm further away from the strut to make clearance for the spring perch.

Originally Posted by The_Werm

So I could run these wheels with large spacer in front and 27/65/18 Michelin slick?

It's important to note that they expect you to run lots of negative camber up from too (-3deg or greater) via camber plates. With that you should be able to. 27/65-18 is the correct tire size.

[The_Werm]

Originally Posted by FaRKle!

To get the proper offset and clearance to the strut. The inside of the rim of the motorsports wheel with spacer sits 5mm further away from the strut to make clearance for the spring perch.

It's important to note that they expect you to run lots of negative camber up from too (-3deg or greater) via camber plates. With that you should be able to. 27/65-18 is the correct tire size.

Yes I would run -3 or more camber with these wheels and slicks. Thanks for the info!

[Track/S]

The_Werm

How about the wheels? Did you buy them? I have ordered for my f87 and I plan to use them with a 5mm spacer on rear and 15mm on front.

[The_Werm]

Originally Posted by Prodrive_X

The_Werm

How about the wheels? Did you buy them? I have ordered for my f87 and I plan to use them with a 5mm spacer on rear and 15mm on front.

Unfortunately I never ordered them. Excited to see fitment and how they look! Post em

[Track/S]

Originally Posted by The_Werm

Unfortunately I never ordered them. Excited to see fitment and how they look! Post em

I plan to mount them with 2NH brakes, let's see if I'm lucky, I will post pictures when they arrive

[MadM2C]

Originally Posted by Track/S

I plan to mount them with 2NH brakes, let's see if I'm lucky, I will post pictures when they arrive

Any update if these fit?

[Track/S]

Originally Posted by MadM2C

Any update if these fit?

Today arrived:

Tires 295/30








With 4mm spacer on rear, i hope 20mm at the front is enough, i will ride them with the 2NH brakes



















You can follow the thread of the car here

https://f87.bimmerpost.com/forums/sh....php?t=1984711

[MadM2C]

Originally Posted by Track/S

Today arrived:

Tires 295/30








With 4mm spacer on rear, i hope 20mm at the front is enough, i will ride them with the 2NH brakes



















You can follow the thread of the car here

https://f87.bimmerpost.com/forums/sh....php?t=1984711

o Wow looks great.

What brakes are you running in the front?

[Track/S]

Originally Posted by MadM2C

o Wow looks great.

What brakes are you running in the front?

2NH with 400mm CCB

[MadM2C]

Originally Posted by Track/S

2NH with 400mm CCB

Hm,

I may be misunderstanding, but how do you expect to make the 18 CS racing wheels fit over the 400mm?

[Track/S]

Originally Posted by MadM2C

Hm,

I may be misunderstanding, but how do you expect to make the 18 CS racing wheels fit over the 400mm?

Very easy 😄

[MadM2C]

Originally Posted by Track/S

Very easy 😄

what modifications did you have to make for this to clear and how much do i have to pay you for you to tell me

[phoenx]

Originally Posted by MadM2C

what modifications did you have to make for this to clear and how much do i have to pay you for you to tell me

Seriously!!!!

[Track/S]

Originally Posted by MadM2C

what modifications did you have to make for this to clear and how much do i have to pay you for you to tell me

You don't have to pay anything , I'll show you in the car thread.

[noemon]

Originally Posted by Track/S

Very easy ��

Dude you 've been my savior here, I've been looking for the past 2 weeks for a 18 wheel to clear my 400mm Alcon Super Kit.

Also ordered the M2 CSR diff today after your recommendation.

Anything else to look out for about these wheels/spacers/studs before I hit the button?

What tyres are you running?

[noemon]

Originally Posted by Track/S

Very easy 😄

Dude you 've been my savior here, I've been looking for the past 2 weeks for a 18 wheel to clear my 400mm Alcon Super Kit.

Also ordered ti M2 CSR diff today after your recommendation.

Anything else to look out for about these wheels/spacers/studs before I hit the button?

What tyres are you running?

[Track/S]

Originally Posted by noemon

Dude you 've been my savior here, I've been looking for the past 2 weeks for a 18 wheel to clear my 400mm Alcon Super Kit.

Also ordered ti M2 CSR diff today after your recommendation.

Anything else to look out for about these wheels/spacers/studs before I hit the button?

What tyres are you running?

The studs depend on the spacer you are going to use, what suspensions do you have? Today I finished that m2 with same configuration as me:

513M 10.5 square with 285/35
GTS knuckles
12mm spacer front and 10mm on rear
75mm studs