My single turbo gt more f80 build

[b_w.]

Originally Posted by Rjulrich61

That's awesome, great to hear! Do you have any sound clips by a chance!? Also, how has the driveability been?

I believe it's required to use ISTA to calibrate the waste gate controller, is that correct?

This is the route I am planning to go with 4n's single exhaust setup. However, Vargas has a single turbo kit that's pretty cool as well!

Cheers,
Robert

i dont have any clips but there are a lot of 4n efr videos on youtube that give you a good sense.

Unless you are getting a smoking price on the vargas I am not sure what would draw you there. I have never had any problems with vargas but there reputation for customer service is certainly not stellar. Whenever i had question on 4N I would call Mike and he would walk me through it.

[Rjulrich61]

Originally Posted by b_w.

i dont have any clips but there are a lot of 4n efr videos on youtube that give you a good sense.

Unless you are getting a smoking price on the vargas I am not sure what would draw you there. I have never had any problems with vargas but there reputation for customer service is certainly not stellar. Whenever i had question on 4N I would call Mike and he would walk me through it.

You absolutely right on that one! Mike is awesome and always willing to inform and help!

Yeah, I've listened to just about every video I've found online anywhere... Love the setup, and it's very proven....

Just always curious to look around and explore other options!


What power level have you been running at the track? How has the balance been and does it feel like its overpowering the chassis?

[Oliver Queen]

Originally Posted by b_w.

Not a lot happening over the last few weeks. Got my flex fuel tune dialed in. Haven't put it on the dyno but motiv thinks at e50 ish I should be in the 700 whp range at 28 psi. Really just doing this for fun because even with stickier 200 two tires warmed up I was struggling for traction during logs. I do want to get it on the dyno this fall to see exactly where it is at.

Have had a bunch of track days and wore through my first set of r7s. Set a pb at stratotech in the 65 seconds and again at radtorque in the mid 1:27s.

Had a double header booked for today and tomorrow but ran into some issues today and had to get towed out. Started getting tough shifts on my cool down laps. Kept working through the gears as I cooled down and it seemed better as I pulled into the pits.

Stopped for lunch and couldn't get it back into gear when I turned it back on. Was good to move through the gears when it was off but once started it wouldn't go in and was trying to lurch forward . When stated in gear it was grinding and lurching. Towed it to the shop that installed the clutch in July. Hopefully it's just a failed bearing and will be rolling again soon for my final days this year.

Solid car and amazing you're on the track with it - I'm going to be running kmp bushings on the build, how do you feel about those overall on the track? Hoping to start getting on the track soon

[b_w.]

Originally Posted by Oliver Queen

Solid car and amazing you're on the track with it - I'm going to be running kmp bushings on the build, how do you feel about those overall on the track? Hoping to start getting on the track soon

KMP kit is as good as it gets for the track. I did it for 2 reasons...diff lift and moved to solid bushings from the poly powerflex I had previously. My diff had signs of bottoming out and all other rubber has been removed so seemed like a good move.

[sly1types]

Now that you have some track time on the 4N kit are you happy with it? or do you wish you would have gone with hybrids like the Pure HF or Mosselmans? I want a nice single, but i think the twins are hard to beat on the track...

[b_w.]

Originally Posted by sly1types

Now that you have some track time on the 4N kit are you happy with it? or do you wish you would have gone with hybrids like the Pure HF or Mosselmans? I want a nice single, but i think the twins are hard to beat on the track...

I really like it. very smooth power delivery but pulls very hard up top. twins are going to be easier and likely cheaper but I have really enjoyed the 4N EFR kit. The sound is also intoxicating

[b_w.]

Finally got started on the f80 again this week. Wish I started earlier because I would have had more time to chase down some issues before track season starts in May.

I had ordered a CF roof from 2M a while back and it finally arrived this week so after parking the car in October changed the oil to fire it up and drive it to the body shop where the roof was going to be installed. To my surprise found what looks like aluminum shavings in the oil filter. Fingers crossed its just the exhaust cam issue that hit a lot of S55's and that I get out of this with just a new exhaust cam and cam ledge. My mechanic didnt think it looked like bearing material.

[IMG]


[/IMG]

Here are a few shots of the roof. For the price I think its pretty good quality. Nice and smooth with no visible defects. Shop will hopefully be done with it by the end of next week. the interior side of the roof does not have a nice finish so will paint matte black. the headliner will not be going back in. will just maintain the front portion of the headliner to match the a pillar. Will also be pulling the door cards, removing all the speakers and remaining insulation. Have flat carbon panels that will do in and maintain window and mirror controls. It still gets driven on the street a bit, mostly to the track, so going for the spartan look.

[IMG][/IMG]

[IMG][/IMG]

My goal with this is weight reduction and should pull 40+ pounds off the roof compared to my steel w. sunroof.

My harness bar from Fall Line showed up a few weeks ago. Nice piece of kit. Welds look great. thinking I will paint it with charcoal steel it spray paint. I have hot water heating in the garage so will be safe to do it.

[IMG]




[/IMG]

Will be moving from quick fit harnesses to a proper six point. with the cobra seats will still retain the factor 3 point as well.

New Enduro harnesses and brey krause sub bar. Need to get a second hans device now so can bring passengers.

[IMG]
[/IMG]

One thing I am still waiting on is a CSR drexler diff with custom ramps from TrackS. Needed to go with the newer style CF driveshaft from the one I have. Found a used one on ebay.

[IMG]
[/IMG]

New
Alcon rotors and pads. These are beefy!

[IMG]


[/IMG]

New front hubs and rear gt4 hubs and motor sport bearings

[IMG]
[/IMG]

picked up a girodisk pad spreader. these Alcons are such a bitch to get the pistons in figured a tool like this would help.

[IMG][/IMG]

M5 looking good outside. Needed to clean a lot of winter grim out and wash the garage floor.

[IMG][/IMG]

Picked up a stock of fluids for the summer

[IMG][/IMG]

and my new helper who distracts me more from getting work done in the garage...he is not actually very helpful

[IMG][/IMG]

I dont have time to tear into the top end so once the roof is done will take it in to have the valve cover pulled. I have tooled up to install the rest of the parts but for now I am not familiar with the cam procedure so will leave it to a professional to get done and hopefully have it back on the road early April. Wasnt budgeting for motor build but if it needs it will build something nice.

[b_w.]

Roof coming along

[b_w.]

Going to paint the inside matte black. Fits nicely.

[b_w.]

Harness bar painted. Wife wasn't particularly impressed that I was painting in the garage and stunk up the house. 2 coats of steelit.