TE:AL (Technical Alloy) - Track

[JNoSol]

Found out that these are coming soon. I wonder if it will clear the F80's brakes?

http://www.bimmerworld.com/Wheels-Ti...ace-Wheel.html

My recommendations

Square Setup: 18x10 ET25
Staggered Setup: 18x9.5 ET22 / 18x10.5 ET27 (aggressive - no race compounds)

[SYT_Shadow]

They look good!! I hope they take out a 11" rear so you can stagger with a 10" front

[baz171]

I think the 18x10.5 ET27 is to aggressive as you say. ET32 would be ideal especially if your going to run track tyres.

There seems to be a significant lip on inner dish which will certainly make fitment a close call. Only trail fit will tell if they clear the calipers.

[JNoSol]

Originally Posted by baz171

I think the 18x10.5 ET27 is to aggressive as you say. ET32 would be ideal especially if your going to run track tyres.

There seems to be a significant lip on inner dish which will certainly make fitment a close call. Only trail fit will tell if they clear the calipers.

There are a few guys running square Apex 18x10 ET25 with race compounds. The staggered setup is where I stated it is too aggressive, so use non-race compounds only.

If they make ET32, it would work. Just need 5-10mm spacer in front depending on suspension option. I didn't see them offering ET32 at the time of this post.