What did you do to your M3/M4 today?

[SteveYem]

Installed CTS Turbo intake kit:

[Tim_M56]

Originally Posted by Alex77586

Installed Turner Motorsport Axle back today paired with AA EQL non-resonated Mid section.

Hey, curious if you had any videos or sound clips with that Turner Axle Back with the AA EQL midpipe? I've been interested in that rear section and wondered how much it changes the sound.

[Charlesm924]

Did exhaust cam bolts , injector cleaning , valve cover gaskets. General cleaning had a slight tick on cold starts on cold mornings did exhaust bolts for peace of mind car only has 29k

[SteveYem]

Installed a 'Competition style' carbon fiber rear spoiler purchased from Kies Motorsports. The carbon fiber looks pretty good and fitment was 9/10; the driver side doesn't quite sit perfectly but it looks good enough and I think there is plenty of contact between the 3M tape and the trunk lid that the spoiler won't go anywhere:

[TanzM4]

Installed an OEM CS steering wheel that I got from a user on here. Also added some OEM carbon trim and paired it with some gloss black inner trim.

Hardest part was removing the inner trim piece, getting the clips off was a total pain.

[BMW4CWD]

I just bought one today, my first BMW.

[jackgreer]

Originally Posted by BMW4CWD

I just bought one today, my first BMW.

Looks like you bought a great one, congrats !

[Alex77586]

Originally Posted by Tim_M56

Hey, curious if you had any videos or sound clips with that Turner Axle Back with the AA EQL midpipe? I've been interested in that rear section and wondered how much it changes the sound.

Got some videos on my YouTube. I’ll be getting more as time goes on. It’s definitely louder, but still same volume at low speed/rpm. If anything, quieter there, but louder high RPM.

[SteveYem]

I swapped a new set of Michelin Pilot Sport A/S 4 onto the black 437M and installed some carbon rear aprons/skirts to round out the rear end. I actually prefer how the A/S 4 tire sidewalls look over the PSS in the same size, so I won’t mind running these tires at all during the winter months. I’m also digging how the new carbo add-ons flow with the existing rear carbon splash guards. The weave isn’t an exact match, but close enough!

Now…to add carbon fiber side skirts or not! That is the question.

[F80RN]

Sending in the cores for the Evolve OEM+ hybrid turbo

[NickyC]

Originally Posted by TanzM4

Installed an OEM CS steering wheel that I got from a user on here. Also added some OEM carbon trim and paired it with some gloss black inner trim.

Hardest part was removing the inner trim piece, getting the clips off was a total pain.

Super nice. You have the interior color combo I wish my CS had.

[Trm3]

Added the front splitter and MAD single mid pipe. Fitment had some issues but got it worked out. Definitely changed the tone of the car. It’s much louder and way more deeper. Now curious how EL would sound. It never ends.

[EezyBeezy]

Originally Posted by Charlesm924

Did exhaust cam bolts , injector cleaning , valve cover gaskets. General cleaning had a slight tick on cold starts on cold mornings did exhaust bolts for peace of mind car only has 29k

Nice job. Did you follow the "DIY: Exhaust Cam Ledge Bolt Replacement" thread here on BP?

[Charlesm924]

Originally Posted by EezyBeezy

Nice job. Did you follow the "DIY: Exhaust Cam Ledge Bolt Replacement" thread here on BP?

I did use that as a reference but also had service manual as well the diy thread is great though

[7iM3less]

Inozetek Super Gloss Nardo Wrap

IG: https://www.instagram.com/7im3less?i...NsamZjMnVvMQ==

[HotRodM4]

Installed OEM MP side skirt extensions just now

[Charlesm924]

Swapped out my turner monoball tension arms with adjustable spl arms

[SteveYem]

I picked up a second set of 437M and had them refinished in Ferric Grey. I’m planning to use these as my summer set:

[SteveYem]

Test fitting the 437M that I had refinished in Ferric Grey (or close to it!)

[F80RN]

Took photos of the new Evolve Automotive
OEM hybrid turbos. Just waiting on my Nitrons before I get everything installed.

[jackgreer]

While in the body shop for some annoying parking lot ding/scratch repair, had the spacers adjusted to 15mm in the rear with the existing 12mm up front for a tight and flush fitment on the stressfully low Sakhir 6MT

[SteveYem]

Rainy Sunday activity- installed a set of MP style carbon fiber side skirt extensions. Subtle!