Wanted coding for AIRBAG delete front seats (Recaro Pole Position)

[alexdaoe]

I want to code out the airbag error for the seats (have Recaro installed in the front of a F80. Can someone confirm me the coding steps to do it with E-sys?

[kubax86]

Originally Posted by alexdaoe

I want to code out the airbag error for the seats (have Recaro installed in the front of a F80. Can someone confirm me the coding steps to do it with E-sys?

It all depends on current faults.
We can help with it -> https://bimmer-remote.com/products/r...-for-bmw-supra

[alexdaoe]

They are all out it only runs harnesses so no oem seatbelt or buckle.

I have found this coding:

ACSM > 3000 > Sitzairbag_Thorax_Fahrer -> nicht_aktive ( was aktive ) ( this is the airbag for the driver )
ACSM > 3000 > Sitzairbag_Thorax_Beifahrer -> nicht_aktive ( was aktive ) ( this is the airbag for the passenger )

ACSM > 3000 > Gurtstrammer_Fahrer -> nicht_aktive ( was aktive ) ( this is the driver seat belt pretensioner )
ACSM > 3000 > Gurtstrammer_Beifahrer -> nicht_aktive ( was aktive ) ( this is the passenger seat belt pretensioner )

ACSM > 3000 > Gurtkontakt_Beifahrer -> nicht_aktive ( was aktive ) ( this is the seat belt contact for the passenger )
ACSM > 3000 > Gurtkontakt_Fahrer -> nicht_aktive ( was aktive ) ( this is the seat belt contact for the driver )



After this I disconnected E-Sys, opened Tool32 and did the following:
File / Load SGBD ( F3 )
Select F01.PRG
From the select Job: F01 window, select FS_LOESCHEN_FUNKTIONAL
Select from main menu Job / Start Job once only ( F5 )

Would this work with my setup of full backets without original belt & buckle?

Also, I don't have Tool32 is this step necessary or can it be done with E-sys or ISTA?