08-01-2020, 09:07 AM | #67 | |
Major
874
Rep 1,030
Posts |
Quote:
JD |
|
Appreciate
0
|
09-26-2020, 11:19 AM | #68 |
Private
11
Rep 74
Posts |
which unit need coding for the damping to change from non-ZCP to CS ? I read that EDC, but there is VDC unit and ICM unit - which are also somehow involved in the chassis management. Just wondering if these two need to be coded somehow as well.
|
Appreciate
0
|
09-27-2020, 09:21 AM | #69 |
Private First Class
120
Rep 134
Posts |
DSC, EPS, GHAS, VDC1, and EGS (if you have DCT) require VO coding for CS or GTS settings. VDC1 is the electronic suspension ECU. See https://f80.bimmerpost.com/forums/showthread.php?t=1649232 for a how to.
|
Appreciate
0
|
09-27-2020, 12:11 PM | #70 |
Private
11
Rep 74
Posts |
thank you, I followed that thread, will try using FDL coding changes one unit after another to see / feel any changes. the reason I've got confused on the EDC/VDC is that kubax86 referred on his saettings as follows - and I've got confused on what is the EDC there and VDC in different setting.
EPS: GTS GHAS: GTS EGS: GTS EDC: CS VDC: Standard |
Appreciate
0
|
07-19-2021, 02:03 PM | #71 |
Private
10
Rep 69
Posts |
Hey guys. I see this is an old thread, but was wondering if anyone has CS EDC coded to a ZCP M4 with KW HAS.
I am considering going to CS EDC and changing the front swaybar to base M4 swaybar. I'm already running a 19" front wheel with a 20" rear ( same as the CS/GTS setup)
__________________
2016 M4 ZCP - ARM Downpipe, KW HAS, Bootmod3 |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|