Rear Splash Shields

DeezBluBallz · 09-26-2022, 02:30 PM

I'm trying to swap out my rear brake shields, as I'm upgrading to CCB brakes. Anyone have any advise on how to get them off, without cutting them up?

Tried searching.

Track/S · 09-28-2022, 03:53 PM

Without removing the bearing they cannot be mounted, or you remove the bearing or cut, i chose to cut mine shields.

DeezBluBallz · 09-28-2022, 03:55 PM

Quote:

Originally Posted by Prodrive_X

Without removing the bearing they cannot be mounted, or you remove the bearing or cut, i chose to cut mine shields.

Just bought some tin snips, I'll cut as well. Do you have any tips on replacing the brake booster? Or did you leave it OEM?

Track/S · 09-28-2022, 04:09 PM

Quote:

Originally Posted by DeezBluBallz

Just bought some tin snips, I'll cut as well. Do you have any tips on replacing the brake booster? Or did you leave it OEM?

Not necessary to change the booster, the only thing you need is to deactivate this function with e-sys:

C_Funktion_Bremsbereitschaft_aktiv_I

I use the stock booster of steel rotors & only deactivated that function.

09-26-2022, 02:30 PM	#1
DeezBluBallz Second Lieutenant 160 Rep 262 Posts Drives: Audi RS5, BMW M3 Join Date: Jun 2019 Location: Omaha, NE iTrader: (0)	Rear Splash Shields I'm trying to swap out my rear brake shields, as I'm upgrading to CCB brakes. Anyone have any advise on how to get them off, without cutting them up? Tried searching. Last edited by DeezBluBallz; 09-26-2022 at 04:09 PM..
	Appreciate 0 Tweet Quote

09-28-2022, 03:53 PM	#2
Track/S Major 1345 Rep 1,322 Posts Drives: M2C, M4 GTS Join Date: Oct 2019 Location: Around the world iTrader: (0)	Without removing the bearing they cannot be mounted, or you remove the bearing or cut, i chose to cut mine shields.
	Appreciate 1 DeezBluBallz160.00 Quote