07-31-2020, 07:45 PM | #3 |
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Code with BimmerCode app.
Both TMS Modules (Left & Right) TMS_03 (Driver Headlight Module left): >Section 3005 -Standlicht Modus 1 -Standlicht Modus 2 -Welcome Light 1 (if you want the 3 LEDs off when unlocking). TMS_03 (Driver Headlight Module right): >Section 3005 -Standlicht Modus 1 -Standlicht Modus 2 -Welcome Light 1 (if you want the 3 LEDs off when unlocking). Stock (On) Amber LEDs: 00, 03, 00, 00, 64, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00 change the Werte Value from 64 to 00 as follows: Coded (Off) Amber LEDs: 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00 Make this same change to all sections mentioned above (Standlicht Modus 1, Standlicht Modus 2, and Welcome Light 1) Edit: Just noticed you have a 2016 so you might have FLE ECUs instead of TMS. If so, then try this: -To turn the side markers off, change LM_ID_LT04 and LM04_Name to F015Wert. -To turn the side markers back on, change LM_ID_LT04 and LM04_Name back to F015Wert_SA552_SAE.
__________________
2015///M3|Yas Marina Blue|Silverstone|
Last edited by F80_BK; 08-05-2020 at 03:55 PM.. |
Appreciate
1
hC1001591.00 |
07-31-2020, 08:01 PM | #4 | |
Lieutenant Colonel
779
Rep 1,636
Posts |
Quote:
|
|
Appreciate
1
MrRager0132.50 |
07-31-2020, 08:09 PM | #5 | ||
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Quote:
__________________
2015///M3|Yas Marina Blue|Silverstone|
|
||
Appreciate
3
|
08-01-2020, 10:20 PM | #6 | |||
Lieutenant Colonel
779
Rep 1,636
Posts |
Quote:
You sure the coding is the same? Gonna try it soon but maybe it's different for mine, as the new LCI lights don't have the same bulbs and stuff. |
|||
Appreciate
0
|
08-01-2020, 11:16 PM | #7 |
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
I have a 2015 M3 with full LED lighting package as well (Pre-LCI obviously), and the TMS instructions worked on my car. So it depends if your car has TMS (2015 and some 2016) or FLE (Later 2016 and newer) in your list of modules in the BimmerCode app.
__________________
2015///M3|Yas Marina Blue|Silverstone|
|
Appreciate
1
bsmf8x778.50 |
08-02-2020, 12:48 AM | #8 | |
Lieutenant Colonel
779
Rep 1,636
Posts |
Quote:
|
|
Appreciate
0
|
08-05-2020, 02:12 PM | #9 | |
Lieutenant Colonel
779
Rep 1,636
Posts |
Quote:
During DRL and nighttime there is no 3 amber bulbs thankfully. The issue is they're still there during welcome lights when I unlock the car and approach it. |
|
Appreciate
0
|
08-05-2020, 02:53 PM | #10 | |
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Quote:
So just to recap the steps in BimmerCode: Make sure you are coding Both Headlight Modules (Left and Right) In Control Units, select 1 headlight at a time: start with left headlight, -Headlight Driver Module left (TMS_03), then select Expert scroll up to search box and type 'Standlicht', then select: ---Standlicht Modus 1 ----select F10_524_ECE or 0x00, 0x03, 0x00, 0x00, 0x00 ---Standlicht Modus 2 ----select F10_524_ECE or 0x00, 0x03, 0x00, 0x00, 0x00 ---Standlicht Modus 3 ----select F10_524_ECE or 0x00, 0x03, 0x00, 0x00, 0x00 do the same thing for right headlight, -Headlight Driver Module right (TMS_03), then select Expert scroll up to search box and type 'Standlicht', then select: ---Standlicht Modus 1 ----select F10_524_ECE or 0x00, 0x03, 0x00, 0x00, 0x00 ---Standlicht Modus 2 ----select F10_524_ECE or 0x00, 0x03, 0x00, 0x00, 0x00 ---Standlicht Modus 3 ----select F10_524_ECE or 0x00, 0x03, 0x00, 0x00, 0x00
__________________
2015///M3|Yas Marina Blue|Silverstone|
|
|
08-05-2020, 03:22 PM | #11 | |
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Quote:
TMS03 (left) -Choose section 3005. -Standlicht Modus 1 and click on F10_524_ECE so there is a check mark next to it. -Click the Back button and do the same for Standlicht Modus 2. -Click the Back button and do the same for Welcome Light 1 (if you want the 3 LEDs off when unlocking). -Click the Back button twice and hit Code in top right. Repeat for TMS03 (right) I also edited my original response with this information.
__________________
2015///M3|Yas Marina Blue|Silverstone|
Last edited by F80_BK; 08-05-2020 at 03:36 PM.. |
|
Appreciate
0
|
08-05-2020, 04:19 PM | #12 | ||||
Lieutenant Colonel
779
Rep 1,636
Posts |
Quote:
Quote:
|
||||
Appreciate
0
|
08-05-2020, 05:24 PM | #13 | ||
Lieutenant
344
Rep 573
Posts |
Quote:
Or euro MDM in BimmerCode. I've done a little bit if coding in the main section but have not gone into expert yet. These are last 2 items I really want coded on my car.
__________________
"When you're racing, it's life. Anything that happens before or after is just waiting."
|
||
Appreciate
0
|
08-05-2020, 08:08 PM | #14 | |||
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Quote:
And for Euro MDM, the developer of BimmerCode posted that it's not possible thru the app, nor can it code GTS features. But that was a post I read from 2018. Maybe he has since added it. You may want to email the developer
__________________
2015///M3|Yas Marina Blue|Silverstone|
|
|||
Appreciate
0
|
08-06-2020, 05:05 AM | #15 | ||||
Lieutenant
344
Rep 573
Posts |
Quote:
I have a 2015, back then the car was capable of high beam assist but in the USA they were coded off.
__________________
"When you're racing, it's life. Anything that happens before or after is just waiting."
|
||||
Appreciate
0
|
08-06-2020, 07:55 AM | #16 | |||||
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Quote:
FEM_BODY Module: 3060 FLA_AKTIVIERUNG set to: werte=02 3073 C_HBA_ENA set to: F030_enable=01 HU_NBT Module: 3000 HIGH_BEAM_ASSISTANT set to: aktiv (werte=01)
__________________
2015///M3|Yas Marina Blue|Silverstone|
|
|||||
Appreciate
1
BitchinManWheels343.50 |
08-06-2020, 07:37 PM | #17 | |
First Lieutenant
207
Rep 354
Posts |
Quote:
__________________
|
|
Appreciate
0
|
08-06-2020, 07:40 PM | #18 | ||
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Quote:
For FLE ECUs: -To turn the side markers off, change LM_ID_LT04 and LM04_Name to F015Wert. -To turn the side markers back on, change LM_ID_LT04 and LM04_Name back to F015Wert_SA552_SAE.
__________________
2015///M3|Yas Marina Blue|Silverstone|
|
||
Appreciate
0
|
08-06-2020, 09:33 PM | #19 |
Captain
591
Rep 988
Posts |
I just flashed to F020_20_07_525 and the TMS modules dont show any folder names in the cafd folder . They just show folders named "." I opened a couple of them and found the same "00, 03, 00, 00, 64, 03, 00, 00, 64, 03,etc..." value in more than 4 folders... decided not to touch it...
|
Appreciate
0
|
08-07-2020, 10:31 AM | #20 | |
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Quote:
__________________
2015///M3|Yas Marina Blue|Silverstone|
|
|
Appreciate
0
|
08-07-2020, 11:16 AM | #21 | |
Captain
591
Rep 988
Posts |
Quote:
I've only touched HU_NBT2, and ASD modules and didnt run into any issues like i do with TMS ECUs. Maybe i should try esys v3.33... |
|
Appreciate
0
|
08-07-2020, 11:20 AM | #22 | ||
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Quote:
__________________
2015///M3|Yas Marina Blue|Silverstone|
|
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|