05-11-2024, 12:39 PM | #1 |
New Member
0
Rep 6
Posts |
VRSF front mount intake question
Featured on BIMMERPOST.com |
05-13-2024, 08:29 AM | #3 |
New Member
0
Rep 6
Posts |
|
Appreciate
0
|
05-13-2024, 07:14 PM | #5 |
Private
24
Rep 79
Posts |
My front mount intakes weren't VRSF- they were Agency Power/VR Performance. But as someone else said this seems to be pretty much all brands of front mounts.
I had tons of lean codes and idle issues stem from having them on my M4. I thought I had a massive air leak or MAF sensors were dirty. I smoke tested, cleaned sensors. Car ran fine once it was warm, but on cold starts it would violently shake side to side like a cammed muscle car and would kill out completely sometimes. They looked cool, but they were the issue. Not sure if it's the weird angled design of them and how the air interacts with the sensors or what, but there was something about the front mount intakes my car really didn't like. Went back to standard VRSF intakes under the hood, car idles fine with no codes |
Appreciate
0
|
Today, 01:24 PM | #9 |
Late Apexer
381
Rep 168
Posts |
Just for another data point, I've got MSR front mounts and have never seen a code.
__________________
2018 BMW ///M3 CS • San Marino Blue • MPE V2, VRSF SMP, KW HAS, GC CPs, SPL FLCAs + TREs + RUCAs + F&R ELs, Fall-Line RTLs, Team Schirmer offset RDB, Michelin PSC2★, MSI 80mm wheel studs, Core4 FC lug nuts, CSF CC, ESS Tuning CPs, MSR FMCAI, Dinan coils, SLON Workshop tie bar, Endless ME20 + RF650
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|