666M wheels with non-ZCP springs?

[///MB ///M3]

Dumb question of the day...

I just picked up a set of silver 666M wheels for my 2016 F80, non-ZCP. I currently have 19" 437M wheels, Is it OK to run my stock non-ZCP springs with the 20" 666M wheels?

BTW no wonder why they are called 666 wheels, I can tell there going to be a devil to keep clean so I just ordered a set of Akebono Ceramic brake pads to minimize brake dust.

As always, I appreciate your advice Bimmerpost fam!

Matt

[Morgen Black]

You should be fine running OEM 666s with your 2016 F80 on stock springs. I have the Akebono pads on my ride and it literally takes me weeks to see any dust on my wheels. They were a good investment.

MB

[///MB ///M3]

Originally Posted by Morgen Black

You should be fine running OEM 666s with your 2016 F80 on stock springs. I have the Akebono pads on my ride and it literally takes me weeks to see any dust on my wheels. They were a good investment.

MB

Thank you! So excited to get these wheels and brake pads installed! Won't be until spring though...

[Wmf80]

I had 666s on my nonZcp f80. No issues at all. Enjoy

[///MB ///M3]

Originally Posted by Wmf80

I had 666s on my nonZcp f80. No issues at all. Enjoy

Thank you!

[_Timm3]

Is there a height difference between comp and non comp springs for f8x?

[Wmf80]

Originally Posted by _Timm3

Is there a height difference between comp and non comp springs for f8x?

I thought I saw that there was a minimal difference. Debated going from non to zcp springs but I went with MSS HAS Kit.

Here’s something I found on the suspension sticky
OEM spring rates for the F80/F82 is 185 lb/in Front, 575 lb/in Rear
OEM COMPETITION PACK spring rates for the F80/F82 is 198 lbs/in Front, 685 lbs/in Rear