|
Post Reply |
|
Thread Tools | Search this Thread |
05-16-2017, 09:58 PM | #1 |
New Member
12
Rep 14
Posts |
Went to Miami performance to have the turbos and bm3 installed, great bunch of guys to work with, anyone in the Florida area thinking of doing either of these upgrades I would highly recommend Miami performance. I had been running an Ess tune and came in at 465 whp but I just wanted more so I've been following bm3 and finally decided to do it. My goal was 550 so I didn't have to change the clutches on the Dct.
Bm3 is definitely not an off the shelf tune my first run on the dyno came in at 525 and they sent PTF the logs, they sent another map and onto the dyno again, 3 more times and 3 more maps and 570 hp later I was very happy. This thing just pulls like crazy. The only problem we ran into was not being able to get the torque to read on the dynojet so the dyno just shows the hp and mph. I also have the Ess dyno run for comparison. |
05-17-2017, 01:42 AM | #2 |
Bored at work....
890
Rep 5,391
Posts |
Looks like great customer service ✔️✔️
__________________
Grey Matter:2008 E92 M3:608/425. SG/PS SOLD!
Dark Matter:2015 F80 M3:495/505. SOLD! Anti Matter :2016 F82 M4 GTS What next?!? A 2022 M235i GC- I must be getting old |
Appreciate
0
|
05-17-2017, 03:41 AM | #3 |
Major
506
Rep 1,385
Posts |
If you want to slap the car on a dyno to pull the tq numbers let me know. I've hosted a few M dyno days in the Miramar area.
__________________
2011 E90m3 ESS G2, active auto x pipe, RK FULL E85, DD
2015 X5M Bootmod3, Downpipes, Mineral white-The wifes DD 1994 300zx 2jz Swapped slicktop- The toy/track car |
Appreciate
1
FSociety3812.50 |
05-17-2017, 04:41 AM | #4 |
Colonel
749
Rep 2,108
Posts |
You need to connect the signal wire to the second coil to get it to read properly, which is not possible to reach (with my experience atleast, unless you have very very small hands i guess) without removing the engine cover below the chargepipe.
So with the 570rwhp was that still trying to limit the power to save the clutch or did you end going for as much power as you can get out of it?
__________________
2015 BMW F80 M3: Tractive EDC Suspension / Dinan Anti-Roll Bars / GC Camber Plates / KMP Dual Diff Mount / Girodisc Rotors / GT4 Brake Cooling Kit / PTF Flash Tune / Eisenmann Downpipes / CSF Heat Exchanger / BMS Charge Pipes
2007 BMW E92 335i (SOLD): BMS JB4 / Quaife LSD / Riss Racing DPs / Helix Intercooler / BMS Intake / STETT Charge Pipe / Forge DVs |
Appreciate
0
|
05-17-2017, 04:46 AM | #5 | |
Major
506
Rep 1,385
Posts |
Quote:
__________________
2011 E90m3 ESS G2, active auto x pipe, RK FULL E85, DD
2015 X5M Bootmod3, Downpipes, Mineral white-The wifes DD 1994 300zx 2jz Swapped slicktop- The toy/track car |
|
Appreciate
0
|
05-17-2017, 05:53 AM | #6 |
Colonel
749
Rep 2,108
Posts |
Yeah that would probably also work, still can be challenging. There isn't much spare to work with with the cover on. I just have mine off anyway since the BMS chargepipes don't fit with the cover installed.
__________________
2015 BMW F80 M3: Tractive EDC Suspension / Dinan Anti-Roll Bars / GC Camber Plates / KMP Dual Diff Mount / Girodisc Rotors / GT4 Brake Cooling Kit / PTF Flash Tune / Eisenmann Downpipes / CSF Heat Exchanger / BMS Charge Pipes
2007 BMW E92 335i (SOLD): BMS JB4 / Quaife LSD / Riss Racing DPs / Helix Intercooler / BMS Intake / STETT Charge Pipe / Forge DVs |
Appreciate
0
|
05-17-2017, 09:28 AM | #8 |
Brigadier General
1469
Rep 3,157
Posts |
|
Appreciate
1
schnell1982345.00 |
05-17-2017, 10:32 AM | #9 | ||||
BimmerPost Supporting Vendor
4496
Rep 1,862
Posts
Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com
|
Quote:
We try Quote:
Quote:
Quote:
Yep! |
||||
Appreciate
1
FSociety3812.50 |
05-17-2017, 01:10 PM | #10 | |
New Member
12
Rep 14
Posts |
Quote:
|
|
Appreciate
0
|
05-17-2017, 02:27 PM | #12 | |
Colonel
749
Rep 2,108
Posts |
Quote:
__________________
2015 BMW F80 M3: Tractive EDC Suspension / Dinan Anti-Roll Bars / GC Camber Plates / KMP Dual Diff Mount / Girodisc Rotors / GT4 Brake Cooling Kit / PTF Flash Tune / Eisenmann Downpipes / CSF Heat Exchanger / BMS Charge Pipes
2007 BMW E92 335i (SOLD): BMS JB4 / Quaife LSD / Riss Racing DPs / Helix Intercooler / BMS Intake / STETT Charge Pipe / Forge DVs |
|
Appreciate
0
|
05-17-2017, 04:59 PM | #13 |
Carholics
210
Rep 177
Posts |
Simple setup and awesome numbers
__________________
Z4 GT3 BodyKit | Pure Turbos | Fuel It | LiteSpeed Racing Wheels | GT250 APR Performance Wing | Studio RSR Rollbar | GTHAUS Meisterschaft turbo back | DinMann CF parts | RECARO CS Sportster | JB4 | CSF Cooling System | Full Custom interior | 2M AutoWerks | Viral vinyl werks | Toyo Tires | Ceramic Pro | Oneighty NYC | DOC Race | M3/M4 BBK | SSP Upgraded Clutches | Custom Coilovers with Hydraulift System By Status Gruppe |
|
Appreciate
0
|
05-17-2017, 06:03 PM | #14 |
New Member
9
Rep 8
Posts |
[QUOTE=Rgs M4;21710982]Went to Miami performance to have the turbos and bm3 installed, great bunch of guys to work with, anyone in the Florida area thinking of doing either of these upgrades I would highly recommend Miami performance. I had been running an Ess tune and came in at 465 whp but I just wanted more so I've been following bm3 and finally decided to do it. My goal was 550 so I didn't have to change the clutches on the Dct.
What did you spend in labor costs? For both turbo installs and tune? |
Appreciate
0
|
05-17-2017, 06:32 PM | #15 | |
New Member
12
Rep 14
Posts |
[QUOTE=NeptuneBimmer;21715180]
Quote:
|
|
Appreciate
0
|
05-18-2017, 06:25 AM | #16 |
Second Lieutenant
23
Rep 253
Posts |
This is awesome OP i might go this route as well.. thanks for swaying my decision.. Not to hijack this thread but what are the stock manual clutches good for torque?
|
Appreciate
0
|
05-18-2017, 12:29 PM | #17 |
Major
491
Rep 1,012
Posts |
|
05-18-2017, 03:37 PM | #18 |
BimmerPost Supporting Vendor
24201
Rep 190,807
Posts |
Nice!
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
05-18-2017, 05:34 PM | #19 |
IG @bmwF9xG80
3813
Rep 7,593
Posts
Drives: G80 M3, X4M, G07 X7m50
Join Date: Apr 2012
Location: NYC to NJ to Orlando FL
|
+1 for MPI guys & great to see solid numbers in such Heat!
BM3 ftw
__________________
60-130mph 6.5s X4M #HCP
60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce IG: @bmwF9XG80 |
Appreciate
0
|
05-30-2017, 01:29 AM | #20 |
Lieutenant
227
Rep 597
Posts |
Rgs M4,
A few questions if you don't mind...
__________________
2015 F82 M4 Yas Marina & Full SS - All pkg/opts but CCB. Xpel - All painted surfaces
MPerf Electronic steering wheel, MPerf pedals, IND (reflectors, vents, grill, engine cover), Carbon Fiber (side marker, seat backs, shifter surround, e-Brake, rear spoiler). Pure S2 turbos, MPerf Exhaust, Akrapovic DPs, BM3 (Cary Jordan 657rwhp+), H&R springs, 20" AvantGarde rims |
Appreciate
0
|
05-30-2017, 01:10 PM | #21 | |
New Member
12
Rep 14
Posts |
Quote:
Catless dps Went with new charge pipes just for peace of mind with the added stress We did a total of 4 runs on the dyno over 2 days, day 1 they couldn't get a torque reading so we left it on the dyno overnight hoping to get it working the next day but no luck. So day 2 we did 3 more runs and after each run we sent the logs to PTF they made adjustments and sent updates until I was happy with the power so yes PTF stayed with us continually until we got it done. Great work on PTFs part, they we're really there the whole time working with Miami performance. Yes the 1750 was everything you mentioned including 2 hrs on the dyno at $100 hr but we ended up on the dyno probably 4-5 hrs. Great bunch of guys at mpi. Their shop car was a gtr that ran an 8.19 1/4 mile so they know their stuff. I couldn't be happier with the results, the only problem I am having is the Florida heat in sport and sport plus. If your easy or flat out on the gas no problem but anywhere in between it bucks like hell. Its not the tune because I had the same problem last year when I was running an ESS tune. Actually took the BMW service manager for a ride last year and he had no answers. Yes I have always been up front with the service dept with everything I've done and I just tell them not to touch the ecu and so far they have been ok with that. |
|
Appreciate
1
FSociety3812.50 |
Post Reply |
Bookmarks |
|
|