Misfires 4-6 drivetrain malfunction

[m4dbimmer]

Originally Posted by chetrickerman

Yes. F80/F82 and F83 all use the same DME

See this thread.https://f80.bimmerpost.com/forums/showthread.php?t=1534478

EU6 engines, like the S55, allegedly do not need to be coded. There are other threads about it.

[chetrickerman]

Originally Posted by m4dbimmer

See this thread.https://f80.bimmerpost.com/forums/sh....php?t=1534478

EU6 engines, like the S55, allegedly do not need to be coded. There are other threads about it.

Im just going off of what the service manual states....

[m4dbimmer]

Originally Posted by chetrickerman

Im just going off of what the service manual states....

Can you show where it states that?

[chetrickerman]

Originally Posted by m4dbimmer

Can you show where it states that?

http://www.newtis.info/tisv2/a/en/f8...nes/1VnXI9uZvq

At the end

[m4dbimmer]

Originally Posted by chetrickerman

http://www.newtis.info/tisv2/a/en/f8...nes/1VnXI9uZvq

At the end

I was not able to find anything relating to reprogramming/coding the injectors. I did see where it mentions the need to reset adaptations, which makes sense.

[chetrickerman]

Originally Posted by m4dbimmer

I was not able to find anything relating to reprogramming/coding the injectors. I did see where it mentions the need to reset adaptations, which makes sense.

I was mistaken about the word coding......

It says:

Attention!

If a solenoid injector was renewed or replaced on the cylinder side, the ultra small quantity adaptation must be reset.

Reset ultra-small quantity adaptation:

Connect diagnosis system and follow the diagnosis instructions.

- Read out vehicle data

- Identification without vehicle test

- Start vehicle test

- Vehicle handling

- Service functions

- Power train

- Engine electronics

- Adjustment functions

- Delete adaptations

- Reset adaptation values

- Resetting minimum quantity adaptations

[m4dbimmer]

Originally Posted by chetrickerman

I was mistaken about the word coding......

It says:

Attention!

If a solenoid injector was renewed or replaced on the cylinder side, the ultra small quantity adaptation must be reset.

Reset ultra-small quantity adaptation:

Connect diagnosis system and follow the diagnosis instructions.

- Read out vehicle data

- Identification without vehicle test

- Start vehicle test

- Vehicle handling

- Service functions

- Power train

- Engine electronics

- Adjustment functions

- Delete adaptations

- Reset adaptation values

- Resetting minimum quantity adaptations

Reset adaptions is what I'm getting from this. S55 injectors do not need coding like they used to with the N54 platform.

[nikobmw]

Originally Posted by m4dbimmer

Reset adaptions is what I'm getting from this. S55 injectors do not need coding like they used to with the N54 platform.

m4dbimmer Did this solve your issue cause I am getting the same exact code 112601 and for the life of me cant figure out what is causing it, do the new injectors need coding? cause I reset adaptation with BM3 and am still getting this issue. I changed everything from spark plugs to coilpacks to all the injectors and the problem still persists, do they Injectors need to be coded or no? did you solve your issue?

[andrei.m4]

S55 do not need coding at injector, i changed all 6 for safety, it need to be same oem code and will run perfectly. Please stop give wrong info.

[AngelF80]

Originally Posted by nikobmw

m4dbimmer Did this solve your issue cause I am getting the same exact code 112601 and for the life of me cant figure out what is causing it, do the new injectors need coding? cause I reset adaptation with BM3 and am still getting this issue. I changed everything from spark plugs to coilpacks to all the injectors and the problem still persists, do they Injectors need to be coded or no? did you solve your issue?

Hi, we're you able to find the solution?

Thank you,