12-15-2019, 10:38 PM | #1 |
First Lieutenant
99
Rep 335
Posts |
F82 and 285/35/20
Any feedback on R888R 285/35/20 tires on rear ZCP wheels on a F82?
Would they NOT rub without spacers? I got spacers on and the tire is rubbing against the quarter panel on turns. I have yet to remove the spacers 20mm spacers. I'm trying to figure out if anyone has some experience with this particular set up before I take any further action. The car has a wrap, so I don't want to destroy the film. Would a spacer-less set up solve the rubbing? Last edited by 6SPD GOD; 04-18-2021 at 08:33 PM.. |
04-05-2021, 07:50 PM | #2 |
Lieutenant
212
Rep 576
Posts |
Over a year and no response, I'm trying to figure out the same thing and haven't seen anybody comment on running a 35 tall tire on the 20" ZCP Wheels. I would like to run a 285/30/20 R888R in the rear, but a 285/35/20 would grab much better.
__________________
current
'18 F22 240i xDrive - FBO '16 F82 M4 ZCP - FBO previous '08 E90 335i Montego Blue |
Appreciate
0
|
04-18-2021, 08:32 PM | #3 | |
First Lieutenant
99
Rep 335
Posts |
Quote:
Thank you! I ran 15mm spacer with 285/35/20 on the rear on stock a ZCP twice. Zero traction issues, zero fitment issues, zero rubbing issues. Totally recommend. The rubbing from the original post came from 20mm spacers. |
|
Appreciate
0
|
04-19-2021, 01:54 AM | #4 | ||
Lieutenant
212
Rep 576
Posts |
Quote:
__________________
current
'18 F22 240i xDrive - FBO '16 F82 M4 ZCP - FBO previous '08 E90 335i Montego Blue |
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|