04-26-2023, 11:26 AM | #1 |
Lieutenant
335
Rep 541
Posts
Drives: F82 M4 BSM
Join Date: Mar 2022
Location: Miami
|
325/25r20 on 20x11 et44?
It's coming up soon where I'm going to need a new set of rear tires, and am wondering about the ability to run some absolute meat in the back.
I've seen a few people with various 19x11's and 19x11.5's running 325/30r19's with the 44 offset. Wondering if anyone has done this on 20x11 or can link me to a thread that has! Thanks
__________________
17' F82 BSM - Current Built Motor/PS2+
16' F82 Silverstone - Totaled FBO |
04-27-2023, 09:21 AM | #2 |
Captain
1153
Rep 783
Posts |
Not really an answer to your question per se, but I'm running 18x11 +44 rears with 315 Toyo 888R's and the fitment between the tire and the inside well is *really* tight.
I'd honestly be surprised to see a +44 11.5 with a 325 work. I think you can fit a 20x11 with a 315 no problem, and probably a 325 as long as they're not too too wide of a tire. I hear the Toyo run pretty wide for their sectional width. Some of it also depends on how low you're running, but that's a pretty standard fitment question. I have some room between the fender and the wheel so you could also run a tiny spacer if needed to give the 325 some space.
__________________
Mosselman-powered M4 - 698/714 | 2.9 Whipple 2004 Cobra - 690/645 | Instagram
|
Appreciate
1
DeTh335.00 |
Post Reply |
Bookmarks |
|
|