07-09-2020, 10:20 AM | #1 |
New Member
15
Rep 21
Posts |
Blendmount mirror tap wiring 2018 M4
Hello collective Hive,
Could anyone definitively let me know which connections to tap into for the mirror tap please? I’d hate to but a multimeter which I’d only use once for 1 minute for this purpose. So far from researching, I’ve come across: Connecting red wire to red/white stripe Black wire to brown wire Or Green/white stripe (I’m asuming to red) Black to brown (ground) Or Green/brown (12v) Brown is ground. Any help is appreciated, Beansy. |
07-09-2020, 11:50 AM | #2 |
Legend
97
Rep 166
Posts |
Here you go:
I used the same wires and works perfectly.
__________________
Insta: @TexasF80 | YouTube:lvnvevo
Supported by: Limitless Car Care | Braum Racing | Opt7 | MRR Wheels |
Appreciate
0
|
01-06-2022, 01:09 AM | #7 |
Private
28
Rep 94
Posts |
I just came across this video and, Jon is connecting to the small red socket. (Refer to 4:01 seconds) as opposed to the Black one that Tommy used.
Just want to make sure I am not draining the car battery. Does it matter here? Is it different for 2020 models vs previous years? Sharing pictures of my mirror unit for reference. Thanks for any help!
__________________
2020 BMW ///M4 Cabriolet - Black Sapphire Metallic | Opal White | M-DCT | ZCP Package | Executive Package
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|