12-13-2019, 05:35 PM | #1 |
Lieutenant Colonel
1582
Rep 1,976
Posts |
LOC and Sub Amp Install Question
So I got the TechnicPNP harness and LOC that I’m going to Install with a powered subwoofer and I had a general question about the power and ground lines.
Can I use the same terminal (the thing that connects to the positive terminal on the battery) for the power lines for the LOC and the sub amp? Meaning can I connect two wire to the same terminal? Both wires have their separate fuses too. Can the same principle be applied to the ground wire too? |
12-13-2019, 08:42 PM | #2 |
Colonel
1618
Rep 2,161
Posts |
Yep. The amp power wire will likely be thicker than the LOC power wire but you can just stack the two ring terminals
|
Appreciate
0
|
12-13-2019, 11:24 PM | #3 |
Lieutenant Colonel
1582
Rep 1,976
Posts |
I actually only have one ring terminal for the amp wire and I WAs really trying to find out if I can stick that LOC wire into that amp ring terminal so that there is only one terminal on the battery. Is that possible? Like clamp the two wires onto that one ring terminal
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|