H&R Sport Springs Issue

[SOLIDM4]

Hello World-

So My shop installed the H&R Sports Springs today, and while driving I hear a small CLUNK! noise. hmmm going slow also, everything was torque and put properly, I mean there almost no way of doing this wrong. but anyways. has anybody experienced any issues with these springs.......

BTW the ride and handling are AMAZING! but is just the noise at this point that bothers me, weird thing is, when I put it in SPORT+ or SPORT. it does not make the sound.... and yes the shocks are good.

Milage on car 35k
The year 2016
Name = SPEED DEMON =)

IF THIS IS A REPOST PARDON ME, I'm new =)

[Shadowmak]

Hi,

check out this...

https://f80.bimmerpost.com/forums/sh...&postcount=196

I think it´s the same issue... As far as i investigated H&R released some some plastic rings for their springs to minimize the noise...

Maybe you can check if u already have those rings installed or not... If not - get them installed...

Greetings

[MPOOR]

Originally Posted by SOLIDM4

Hello World-

So My shop installed the H&R Sports Springs today, and while driving I hear a small CLUNK! noise. hmmm going slow also, everything was torque and put properly, I mean there almost no way of doing this wrong. but anyways. has anybody experienced any issues with these springs.......

BTW the ride and handling are AMAZING! but is just the noise at this point that bothers me, weird thing is, when I put it in SPORT+ or SPORT. it does not make the sound.... and yes the shocks are good.

Milage on car 35k
The year 2016
Name = SPEED DEMON =)

IF THIS IS A REPOST PARDON ME, I'm new =)

Check if any one of those HnR springs are binding anywhere or show signs
of binding, touching ect ~ get you self a spring protecting rubber it might help with noise ~ And of course check if they are properly aligned and seated as well.

[SOLIDM4]

Originally Posted by nysid2007

Check if any one of those HnR springs are binding anywhere or show signs
of binding, touching ect ~ get you self a spring protecting rubber it might help with noise ~ And of course check if they are properly aligned and seated as well.

Yea it was a Spindle screw loose SMH...