[CODING] Missing CAFD Files

[Lifestyler]

Hey is anybody knows what to code when upgrading from blue steel brakes 4pot to full m2c 6pot 400mm Fr 380mm 4pot rear?

[F34 BMW]

Hello,

I'm from germany and got the same problem. I have Version 4.15.23 but cafd_00000794-018_070_004 is missing. Can anyone help me and can send me a complete new cafd list?. There is very much missing i need for some codings.

[kubax86]

Originally Posted by F34 BMW

Hello,

I'm from germany and got the same problem. I have Version 4.15.23 but cafd_00000794-018_070_004 is missing. Can anyone help me and can send me a complete new cafd list?. There is very much missing i need for some codings.

You need newest version psdzdata lite.

[shawnsheridan]

Originally Posted by F34 BMW

Hello,

I'm from germany and got the same problem. I have Version 4.15.23 but cafd_00000794-018_070_004 is missing. Can anyone help me and can send me a complete new cafd list?. There is very much missing i need for some codings.

PM sent.

[F34 BMW]

Thanks!!
Is this the newest version? Because there are also ECU's in the F34 which i couldn't code.

[shawnsheridan]

Originally Posted by F34 BMW

Thanks!!
Is this the newest version? Because there are also ECU's in the F34 which i couldn't code.

Yes. Are you having issues with it? Or you have even tried yet?

[F34 BMW]

I will try it tomorrow thanks

[shawnsheridan]

Originally Posted by F34 BMW

I will try it tomorrow thanks

[flop1985]

Hello.
I changed my OS on the laptop and lost my e-sys. Checking the inbox from here I saw that the pszdata shawn sent me a while ago isn't available anymore. And after installing launcher 2.8 I get the infinite restart of the launcher. Please have mercy Shawn

[shawnsheridan]

Originally Posted by flop1985

Hello.
I changed my OS on the laptop and lost my e-sys. Checking the inbox from here I saw that the pszdata shawn sent me a while ago isn't available anymore. And after installing launcher 2.8 I get the infinite restart of the launcher. Please have mercy Shawn

PM sent.

[sambe002]

Originally Posted by shawnsheridan

PM sent.

Hello.

I want to code a F48 BMW-X1.
But I get a CAFD error
CAFD_00000794_018_070_004 Fehler
Can you help?

Thanks, henk

[shawnsheridan]

Originally Posted by sambe002

Hello.

I want to code a F48 BMW-X1.
But I get a CAFD error
CAFD_00000794_018_070_004 Fehler
Can you help?

Thanks, henk

Update your PSdZData. PM sent.

[chevu1990]

Originally Posted by shawnsheridan

Update your PSdZData. PM sent.

Hello sir Shawn i sent you a PM. Maybe you could help. Thanks in advance

[Rambo-313]

i have corupted fem body CAFD_FFFFFFFF_255_255_255, i using esys 3.27.1. but i do not have detect caf for swe, do i need some reinstal or ?
also can you send me latest pszddata
thanks

[bestwick]

Dear
My HU-U was like this before the failure and now it is like this, you can modify that data and enter the ones that were before the failure, please help.

https://postimg.cc/crG1chgR

[shawnsheridan]

Originally Posted by bestwick

My HU-U was like this before the failure and now it is like this, you can modify that data and enter the ones that were before the failure, please help.

NBT is trashed. You need to flash it.

[shawnsheridan]

Originally Posted by Rambo-313

i have corupted fem body CAFD_FFFFFFFF_255_255_255, i using esys 3.27.1. but i do not have detect caf for swe, do i need some reinstal or ?
also can you send me latest pszddata
thanks

PM sent.

[KL4K50N]

Hello guys !

Bought a new LCI climatecontrol panel for my preLCI F10. Yesterday i have tried to detect CAF for SWE, choosed the newer one and press CODE button. The problem is that the Esys showing me some error during flash and i cant add CAFD file into IHKA... Any help?

[theyizzle]

Originally Posted by shawnsheridan

PM sent.

Hi Shawn, I'm having the same problem where the 'Detect CAF for SWE' button is greyed out, can you help, please?

Mine has gone horribly wrong, somehow. I was certain I had followed the instructions carefully, but as mine is a 330e (2016) I don't have AS/S to turn off, so the engine would 'cut out' to the electric engine after a while, so perhaps that has given me trouble. I've since learnt that popping the engine lid keeps the fuel engine on (not sure if that will have any other adverse effect, though)

I've read literally hundreds of pages (at each end) of https://f30.bimmerpost.com/forums/sh...d.php?t=696777 looking for where someone else might have had the same issues, and have tried using the search function... No luck.
I have tried the individual (right click on each ECU) VO Code as I'd seen recommended to others, but that seems to have made things worse

I'm now missing CAFD for a bunch;
EME4 [3a]
FEM_GW [10]
FLE [44]
FZD [56]
GWS [5e]
HU_NBT2 [[63]
KOMBI [60]
PMA2 [2c]
SME2 [7]
TBX [35]BX
TFM2 [1d]
TRSVC [6]

And have the FFFFFFFF problems with these two;
ATM [61] – CAFD_FFFFFFFF_255_255_255
FEM_Body [40] – CAFD_FFFFFFFF_255_255_255

Using E-Sys 3.27.1 with Launcher 2.8.2.
I know my I-Step (Current, Last & Shipment).

[shawnsheridan]

Originally Posted by KL4K50N

Hello guys !

Bought a new LCI climatecontrol panel for my preLCI F10. Yesterday i have tried to detect CAF for SWE, choosed the newer one and press CODE button. The problem is that the Esys showing me some error during flash and i cant add CAFD file into IHKA... Any help?

Detect CAF for SWE is not flashing. If CAFD injection failed, either FA is not correct, or CAFD being injected is not compatible with the existing ECU firmware, in which case you will need to actually flash ECU.

[shawnsheridan]

Originally Posted by theyizzle

Hi Shawn, I'm having the same problem where the 'Detect CAF for SWE' button is greyed out, can you help, please?

Mine has gone horribly wrong, somehow. I was certain I had followed the instructions carefully, but as mine is a 330e (2016) I don't have AS/S to turn off, so the engine would 'cut out' to the electric engine after a while, so perhaps that has given me trouble. I've since learnt that popping the engine lid keeps the fuel engine on (not sure if that will have any other adverse effect, though)

I've read literally hundreds of pages (at each end) of https://f30.bimmerpost.com/forums/sh...d.php?t=696777 looking for where someone else might have had the same issues, and have tried using the search function... No luck.
I have tried the individual (right click on each ECU) VO Code as I'd seen recommended to others, but that seems to have made things worse

I'm now missing CAFD for a bunch;
EME4 [3a]
FEM_GW [10]
FLE [44]
FZD [56]
GWS [5e]
HU_NBT2 [[63]
KOMBI [60]
PMA2 [2c]
SME2 [7]
TBX [35]BX
TFM2 [1d]
TRSVC [6]

And have the FFFFFFFF problems with these two;
ATM [61] – CAFD_FFFFFFFF_255_255_255
FEM_Body [40] – CAFD_FFFFFFFF_255_255_255

Using E-Sys 3.27.1 with Launcher 2.8.2.
I know my I-Step (Current, Last & Shipment).

Injecting CAFD (Detect CAF for SWE) and Flashing ECU's with >= v.4.17.20 PSdZData requires using newer E-Sys 3.30.0 or higher. PM sent.

It's hard to imagine that many ECU are missing CAFD. You need to check again, and make sure motor is running when you do.

ATM and FEM_BODY are corrupt. They will need CAFD Injection and Encoding.

[theyizzle]

Originally Posted by shawnsheridan

Injecting CAFD (Detect CAF for SWE) and Flashing ECU's with >= v.4.17.20 PSdZData requires using newer E-Sys 3.30.0 or higher. PM sent.

It's hard to imagine that many ECU are missing CAFD. You need to check again, and make sure motor is running when you do.

ATM and FEM_BODY are corrupt. They will need CAFD Injection and Encoding.

Thanks as always Shawn.
You're too kind and underestimate my ability to F things up! I thought I'd messed up so bad I would have to consider the car a write off. My instrument cluster & NBT weren't working, and I was getting all sorts of weird errors:
"Vehicle Configuration Inconsistent. Check"
"Parking Brake Failure"
"Drivetrain Failure"
"Check Convertible Roof Secure" (mine's not a convertible!!)
and a few others.
The service indicators all had re-set too and were telling me that service items were due for the year 2000 (just a little 16 years before the car was built).
I did indeed have all those cafd’s missing, but with your helpful instructions most are now restored. My NBT & Instrument Cluster are working again, and I’m no longer getting the above codes.

However, for a few of the ECUs, when I click Detect CAF for SWE it says “No CAFD-Mapping for base variant “xxxx” found. [G090]”. I’m still missing cafd for:
EME4 [3a]
FEM_GW [10]
FLE [44]
GWS [5e]
TFM2 [1d]
I'm going to try to re-extract and replace PSdZData full into the Data folder in case something went wrong there.

I still have some errors:
Restraint System seemingly not working - "Function of airbags, belt tensioners and belt force limiter fault." I'm going to check some of the lines within ACSM to make sure they are coded to aktiv.
My Adaptive Cruise Control doesn't work anymore, either - I believe that one is under ICM so will look around carefully in there.
My front-right (driver-side in UK) light cluster doesn't work either. I know the car was in an accident before I bought it, so that was likely replaced. Need to figure out how I can get that working as a non-original part if anyone knows what I need to do for that..? *Edit - found this thread which I'll try https://f30.bimmerpost.com/forums/sh....php?t=1718799