*SOLD* - USED - F80 F82 F87 Comp/CCB Front/Rear Calipers + Steel Rotors + Pagid Pads

[JCDakarM3]

BIMMERPOST / Classifieds

Asking Price:

Sold

Or Best Offer

Item Interest

This includes everything you need to install OEM 6/4 Piston CCB Calipers and steel rotors on your F80/F82/F87 non CCB vehicle.

What is included here is essentially identical to what you would get on the M2 Competition from the factory.

All components listed are almost new and have less than 1k miles on them.

Included components:

- Front Left 6 Piston CCB Caliper Assembly (34117850463)
- Front Right 6 Piston CCB Caliper Assembly (34117850464)
- Rear Left 4 Piston CCB Caliper Assembly (34217850465)
- Rear Right 4 Piston CCB Caliper Assembly (34217850466)
- Front Left Two-Piece Rotor 400mmX36mm (34118072017)
- Front Right Two-Piece Rotor 400mmX36mm (34118072018)
- Rear Left Two-Piece Rotor 380mmX28mm (34118072019)
- Rear Right Two-Piece Rotor 380mmX28mm (34118072020)
- Front Left Protection Sheild for 400mm rotor (34118058655)
- Front Right Protection Sheild for 400mm rotor (34118058656)
- Rear Left Protection Sheild for 380mm rotor (34208094317)
- Rear Right Protection Sheild for 380mm rotor (34208094318)
- BimmerWorld Stainless Steel Brake Line Kit (100.34.680.3001)
- Pagid RS29 Front Pad Set
- Pagid RS29 Rear Pad Set

This kit would cost $5500+ to replicate.

Please see pictures to get an idea of what wheel clearance would look like behind 19" Apex ARC-8 wheels. I do not believe these will clear 18" wheels.

This is also listed on EBay. If you prefer, you can purchase it there. I do have it listed for a higher price on EBay to cover the seller fees - https://www.ebay.com/itm/175653759487

I am located in upstate NY, zip code 12533. I prefer local transactions and accept Cash/PayPal, NO CHECKS. I am willing to ship at buyers expense.

Thank you for your interest!

[NickyC]

Interested as long as shipping isn’t insane which I fear it would be. Sent a PM thanks.

[JCDakarM3]

Originally Posted by NickyC

Interested as long as shipping isn’t insane which I fear it would be. Sent a PM thanks.

Replied!

[M3ntal_F80]

Sent you a PM

[JCDakarM3]

Originally Posted by Lj_F80

Sent you a PM

Replied!

[JCDakarM3]

Bump

[homemade_f81]

Great looking set! However, I don't think there are any 18" stock wheels that will clear these brakes. These require 19"+ wheels to clear the fronts.

[tropicatango]

Originally Posted by homemade_f81

Great looking set! However, I don't think there are any 18" stock wheels that will clear these brakes. These require 19"+ wheels to clear the fronts.

Exactly, 19 is already tight in front with oem 19 wheels, wheel cleaning brush can’t go between caliper and barrel

[JCDakarM3]

Originally Posted by homemade_f81

Great looking set! However, I don't think there are any 18" stock wheels that will clear these brakes. These require 19"+ wheels to clear the fronts.

Correct, for some reason I thought the 437Ms were 18s, and remembered seeing pictures of them mounted over CCBs. Will correct the listing, thanks!

[NickyC]

What, these are still available? I thought these would be gone within 48 hours, this price is amazing considering the condition all of this stuff is in. OP is also extremely helpful with questions and I'm still considering this (pads are my only hesitation). GLWS.

[JCDakarM3]

Originally Posted by NickyC

What, these are still available? I thought these would be gone within 48 hours, this price is amazing considering the condition all of this stuff is in. OP is also extremely helpful with questions and I'm still considering this (pads are my only hesitation). GLWS.

Thanks Nicky! You know, you can always make me an offer for everything minus the pads

[NickyC]

Originally Posted by JCDakarM3

Thanks Nicky! You know, you can always make me an offer for everything minus the pads

Look, with your price for the kit being so low and those high quality brake pads I didn't want to insult you by piecemealing it out. I thought for sure that setup would sell in just a couple days because it's like $1k lower than the red setup you can buy (gold calipers look better I say), and yours looks as good as new. Throw in the fact your pads are what, like $700 or something too?

I'll also throw in your shipping costs were unbelievably low, so if anyone is concerned about shipping I don't think you should be. I'm trying to help you sell the kit here, but I'll certainly be thinking about it a bit more on my end. Thanks again!

[JCDakarM3]

Originally Posted by NickyC

Look, with your price for the kit being so low and those high quality brake pads I didn't want to insult you by piecemealing it out. I thought for sure that setup would sell in just a couple days because it's like $1k lower than the red setup you can buy (gold calipers look better I say), and yours looks as good as new. Throw in the fact your pads are what, like $700 or something too?

I'll also throw in your shipping costs were unbelievably low, so if anyone is concerned about shipping I don't think you should be. I'm trying to help you sell the kit here, but I'll certainly be thinking about it a bit more on my end. Thanks again!

All very true.

No insult ever taken. I am certainly in no rush to sell any of the parts I have listed, and do not mind waiting for the right buyers. However, I am always willing to consider reasonable offers.

Again, I really appreciate the courteous comments regarding the listing, thank you!

[Kal_el]

This is a great deal and less than what I paid for CCB/girodisc setup. Great condition too. If someone wants the calipers I'd be interested in the pads and rotors. OP LMK if you'd split that up, thanks!

[JCDakarM3]

Originally Posted by Kal_el

This is a great deal and less than what I paid for CCB/girodisc setup. Great condition too. If someone wants the calipers I'd be interested in the pads and rotors. OP LMK if you'd split that up, thanks!

Definitely! If you know someone interested, or if someone reading this is interested in just the calipers, I would have no problem splitting up the sale.

[ENDL3SS]

May be interested in just the calipers. Mind PMing me price shipped to 75204?

[JCDakarM3]

Originally Posted by ENDL3SS

May be interested in just the calipers. Mind PMing me price shipped to 75204?

PM sent

[M3ntal_F80]

I pm'd you a while back about just the calipers. Shoot me a pm if they're still available

[JCDakarM3]

Originally Posted by Lj_F80

I pm'd you a while back about just the calipers. Shoot me a pm if they're still available

LJ, sent you a PM

[Franck2]

Wow

[carbon-14]

Will 18” wheels clear these rear CCB calipers?

Edited question….

[JCDakarM3]

Originally Posted by carbon-14

Will rear 18” wheels clear these CCB calipers?

I would assume 18" wheels clear the rear CCB 4 piston calipers/rotors, as the rear CCB rotors are 380mm, identical in size to the front non CCB rotors.

From what I have found, and from information provided by fellow forum members, no 18" wheels will clear the front CCB 6 piston calipers/400mm rotors.