07-26-2018, 08:21 PM | #1 |
Tanzanite Blue II X5M Pilot
1041
Rep 2,021
Posts
Drives: M3, M4, X3 M40i, X5M
Join Date: Nov 2011
Location: WS, GSO High Point, NC
|
Active 8 software for competition package
Active 8 software. Plug and play piggyback tune with only 3 connections required and 20-30 minute install time. Works flawlessly! Retails for $1000+ shipping. I used in in my M4 for a few months and was totally happy with the performance boost over stock. PRICE DROP! $400/shipped in mint condition. Text me at (336)413-3198 ACTIVE-8 THE POWER WITHIN YOUR BMW M3 & BMW M4 The ACTIVE-8 is our latest software tuning module. The ACTIVE-8 will effectively raise the performance level of your F80 BMW M3 and F82/83 BMW M4 and be installed in under an hour. With a 64-bit processor, the ACTIVE-8 module communicates with your BMW's DME faster than any other piggyback on the market – allowing us to turn up the boost and unleash horsepower and torque reliably and consistently all the way to redline. With the ACTIVE-8 module installed, expect to see gains of 40-75 RWHP and 60-80 RWTQ depending on the octane level available in your area The best part? No Check Engine Lights. KEY FEATURES: 64-Bit Processor Available for 91-93 octane (based on AKI rating) Gain 40-75 RWHP & 60-80 RWTQ on pump gas Easy to install - no splicing wires or drilling required! BMW factory-like harness w/dedicated hardware for discrete mounting When removed, leaves no trace of installation In-house tuning w/ documented results from our chassis dyno Sealed water/shock-proof housing and connectors to protect against heat & outside elements F8X BMW ACTIVE-8 APPLICATIONS: F80 BMW M3 F82 BMW M4 F83 BMW M4 Convertible DYNOJET RESULTS: ACTIVE-8 F80 M3 VS. STOCK F80 M3 REAR-WHEEL HORSEPOWER: BLUE line – Stock F80 BMW M3: 383 WHP PURPLE line - Active-8 F80 BMW M3: 457 WHP REAR-WHEEL TORQUE: GREEN line – Stock F80 BMW M3: 385 WTQ RED line – Active-8 F80 BMW M3: 453 WTQ Note: Active Autowerke’s F8X BMW M3 and BMW M4 software tune was configured using 93 octane pump gas (based on AKI rating). The ACTIVE-8 has a dedicated, pre-wired engine harness fabricated with factory-like terminals for quick and easy connection and disconnection. Installing the ACTIVE-8 tuning module is so easy, it can be installed and ready to go in under an hour. A fully-illustrated installation guide is included with each ACTIVE-8 module to help make installing the module as easy as possible. WHY ACTIVE-8 FOR YOUR BMW M3 OR M4? Besides having a clean, OEM look and being incredibly simple to install; the ACTIVE-8 tuning module is unmatched in regards to making reliable and consistent power. What separates the ACTIVE-8 from other piggyback devices is how rapidly our module communicates with the BMW DME thanks in part to the device’s 64-bit processor. The advantages of this faster processing speed becomes clear when comparing dyno graphs from an ACTIVE-8 equipped vehicle to those of a vehicle equipped with a competitor’s tuning solution. The power curve for an ACTIVE-8 car will be much smoother. Other piggyback devices with slower processors may have a hard time maintaining a consistent power curve due to the slower processing speeds. Last edited by gixxerboy63; 11-03-2018 at 05:59 PM.. |
12-09-2018, 06:39 PM | #2 |
Tanzanite Blue II X5M Pilot
1041
Rep 2,021
Posts
Drives: M3, M4, X3 M40i, X5M
Join Date: Nov 2011
Location: WS, GSO High Point, NC
|
Snow day bump!
|
Appreciate
0
|
01-17-2019, 04:47 PM | #3 |
Tanzanite Blue II X5M Pilot
1041
Rep 2,021
Posts
Drives: M3, M4, X3 M40i, X5M
Join Date: Nov 2011
Location: WS, GSO High Point, NC
|
Still for sale!
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|