Meth installation DIY

AlteredBe4st · 08-20-2020, 08:58 PM

Looking to hook up a Snow Performance Meth kit on M3 any DIY videos or pictures on install? Where is Boost reference hooked up to on these vehicles, do you have meth injectors installed on charge pipes or J pipe, also what settings do you have Meth sparying low to high for duel spray? Thank you in advance.

TakeOne · 08-20-2020, 11:04 PM

Quote:

Originally Posted by AlteredBe4st

Looking to hook up a Snow Performance Meth kit on M3 any DIY videos or pictures on install? Where is Boost reference hooked up to on these vehicles, do you have meth injectors installed on charge pipes or J pipe, also what settings do you have Meth sparying low to high for duel spray? Thank you in advance.

Kies just installed my meth kit. There are many options where to get your boost reading from. Charge pipes, J pipe or charge cooler. I was a unique scenario. My charge pipes are silicone and don't have bungs. My tuner wanted me to use #6 nozzles in both bungs on my FTP J pipe, so Bryan at Kies tapped my charge cooler with this little adapter. So yeah I'm using two nozzles but not technically in a "2 stage" spray. Spray begins at 15 psi and goes full at 20 psi.
I'll be posting my first impressions, along with gauge setup, and first flash/data log video tomorrow with the Snow Performance Stage 2.5 kit tomorrow

TakeOne · 08-21-2020, 12:30 PM

As promised, video just went live. I cover some of the J pipe, nozzle stuff and setting up the Snow Performance gauge in the video and then go for my first spin

tom @ eas · 08-21-2020, 05:15 PM

We carry the Macht Schnell Boost blocks in stock as well, for those looking for a boost port.

ShoNufff · 08-22-2020, 08:28 AM

I'm running 100% meth with one #6 nozzle into my J-pipe on stock turbos with e85. Boost reading is coming off my intake manifold and got my VC-50 installed here.

AlteredBe4st · 08-22-2020, 10:05 AM

Thank you all, it's good to see the different variations keep them coming.

sly1types · 11-26-2020, 04:46 PM

Nice Setup!

Maxf80M3 · 11-26-2020, 06:19 PM

Quote:

Originally Posted by tom @ eas

We carry the Macht Schnell Boost blocks in stock as well, for those looking for a boost port.

Can this be used if we are spraying meth in the chargepipes ? I read we should take the boost reading before the spray point ? Is this true ?

chewbakam4 · 11-27-2020, 08:32 AM

Quote:

Originally Posted by tom @ eas

We carry the Macht Schnell Boost blocks in stock as well, for those looking for a boost port.

Wow that’s clean!

tom @ eas · 11-27-2020, 01:59 PM

Quote:

Originally Posted by Maxf80M3

Can this be used if we are spraying meth in the chargepipes ? I read we should take the boost reading before the spray point ? Is this true ?

Shouldn't matter.

08-20-2020, 08:58 PM	#1
AlteredBe4st First Pride 85 Rep 1,516 Posts Drives: M4 Join Date: Feb 2011 Location: Connecticut.. iTrader: (6)	Meth installation DIY Looking to hook up a Snow Performance Meth kit on M3 any DIY videos or pictures on install? Where is Boost reference hooked up to on these vehicles, do you have meth injectors installed on charge pipes or J pipe, also what settings do you have Meth sparying low to high for duel spray? Thank you in advance. __________________ Modded M4
	Appreciate 0 Tweet Quote

08-21-2020, 12:30 PM	#3
TakeOne Just1MoreMod 184 Rep 609 Posts Drives: F80 M3, F48 X1 Join Date: May 2008 Location: mid-atlantic iTrader: (5)	As promised, video just went live. I cover some of the J pipe, nozzle stuff and setting up the Snow Performance gauge in the video and then go for my first spin __________________ Stage 1 - 11.7 @123mph, Stage 2 - 11.4 @126mph Full E85 - 11.4 @130mph, Pure Turbos - 10.8 @134mph https://www.youtube.com/just1moremod https://www.instagram.com/just1moremod/
	Appreciate 2 rborane166.00 ShoNufff77.50 Quote

08-21-2020, 05:15 PM	#4
tom @ eas BimmerPost Supporting Vendor 4676 Rep 16,881 Posts Drives: BMW Join Date: Nov 2005 Location: Anaheim, CA iTrader: (19) Garage List 2018 BMW i3s [0.00] 2010 BMW M3 [5.00] 2015 BMW M4 [3.50]	We carry the Macht Schnell Boost blocks in stock as well, for those looking for a boost port. __________________ Tom G. \| european auto source (eas) email: tom@europeanautosource.com · web: www.europeanautosource.com · tel 866.669.0705 · ca: 714.369.8524 x22 GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
	Appreciate 1 papasmurf_m3255.00 Quote

08-22-2020, 08:28 AM	#5
ShoNufff Who's da masta? 78 Rep 180 Posts Drives: M4 Join Date: Aug 2015 Location: Norfolk, VA iTrader: (1)	I'm running 100% meth with one #6 nozzle into my J-pipe on stock turbos with e85. Boost reading is coming off my intake manifold and got my VC-50 installed here.
	Appreciate 3 TakeOne184.00 Detoxified133.00 Maxf80M3160.50 Quote

08-22-2020, 10:05 AM	#6
AlteredBe4st First Pride 85 Rep 1,516 Posts Drives: M4 Join Date: Feb 2011 Location: Connecticut.. iTrader: (6)	Thank you all, it's good to see the different variations keep them coming. __________________ Modded M4
	Appreciate 0 Quote

11-26-2020, 04:46 PM	#7
sly1types Lieutenant 163 Rep 528 Posts Drives: F80M3 and E46M3 Join Date: Apr 2007 Location: KC iTrader: (0)	Nice Setup! __________________ F80 M3-DCT MaxPSI CH, BM3 with F80 Paul E85 Tune AA Mid Pipe & VRSF DPs Signature SV104 E46 M3 F85 X5M https://www.instagram.com/fastmacm3/
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search