OLED Tail Lights for F80 M3

[s55jesus]

Originally Posted by erik-f80

And from a closer look the fitment isn't good?

I already posted pictures of the fitment close up. Should be a few pages back.

[erik_m3g80]

Originally Posted by eff80m3

I already posted pictures of the fitment close up. Should be a few pages back.

Yea right. I found them. That fitment is really bad.

[dubsesd]

Originally Posted by eff80m3

I think dubsesd mentioned it will be roughly $2k IIRC. I bought these Alibaba ones to test though, not permanently run on my car and that's probably what everyone here ordered them for. Once Solas releases theirs I will more than likely switch over solely based fitment.

Aiming for a cheaper price point than 2k....cherry housings are definitely in the game plan

[TRYM3]

Originally Posted by DaytonaVioletM3

The only problem is the start up sequence sucks in my opinion and the lights don't seem to be as bright as mine.

Bit the bullet and ordered! Thanks for your help Sean

[jpy1980]

Originally Posted by TRYM3

Bit the bullet and ordered! Thanks for your help Sean

What link did you use to order?

[AtlantisF80]

Who would spend $600+ just to "test" an item? What a way to waste your $$$. Majority of people don't buy to test especially if it costs hundreds of dollars.

[Bluer2]

Originally Posted by AtlantisF80

Who would spend $600+ just to "test" an item? What a way to waste your $$$. Majority of people don't buy to test especially if it costs hundreds of dollars.

that's why we call these early testers heros.

[SanchoDivine]

Originally Posted by AtlantisF80

Who would spend $600+ just to "test" an item? What a way to waste your $$$. Majority of people don't buy to test especially if it costs hundreds of dollars.

Test as in they are going to try the item out and if they like it, they'll stick to it saving X amount of money over the alternative. If they aren't happy with it then they may be able to return them for a refund or they may end up eating the cost as part of the gamble. If they share their experience, it could really benefit the community and a lot of people would be thankful.

[s55jesus]

Originally Posted by AtlantisF80

Who would spend $600+ just to "test" an item? What a way to waste your $$$. Majority of people don't buy to test especially if it costs hundreds of dollars.

So would you rather not have anyone be the guinea pig and just leave the fitment and quality issues in the air? I did this so I can see if it's worth peoples times to even spend that money and wait weeks for an untested item because I'm fortunate enough to be in a position to help my fellow forum members. I don't see why that can be such a big deal for you to write something like that. I don't tell you how you should be spending your money. Let me "waste" mine in peace.

Originally Posted by SanchoDivine

Test as in they are going to try the item out and if they like it, they'll stick to it saving X amount of money over the alternative. If they aren't happy with it then they may be able to return them for a refund or they may end up eating the cost as part of the gamble. If they share their experience, it could really benefit the community and a lot of people would be thankful.

Exactly.

[TRYM3]

Originally Posted by SanchoDivine

Test as in they are going to try the item out and if they like it, they'll stick to it saving X amount of money over the alternative. If they aren't happy with it then they may be able to return them for a refund or they may end up eating the cost as part of the gamble. If they share their experience, it could really benefit the community and a lot of people would be thankful.

exactly

[david51]

Personally, I ordered 2 different models and I would keep the one I like the most

[DaytonaVioletM3]

Originally Posted by david51

Personally, I ordered 2 different models and I would keep the one I like the most

I just did the same thing david51

My V2 set is on it's way.

[david51]

Originally Posted by DaytonaVioletM3

I just did the same thing david51

My V2 set is on it's way.

[weytie]

Curious to see how these 2 compare.
I contacted the manufacterer and for the F32/F82 they only should make the version without the line in de led panels due to problem that they are not bright enough under sunlight...

When i asked him, he said the V1 is brighter then the V2....
Don't know how this could be different

[11LMBiSTT]

Patiently waiting for v3. Lol. Fingers crossed.

[DaytonaVioletM3]

Originally Posted by 11LMBiSTT

Patiently waiting for v3. Lol. Fingers crossed.

Smart move lol

I can never resist trying something that is new and being a guinea pig!

[11LMBiSTT]

Originally Posted by DaytonaVioletM3

Smart move lol

I can never resist trying something that is new and being a guinea pig!

I get ancy and impatient too, but I'm the guy who'll wait for the 'LCI'. Lol. But, if I found a set locally, v1 or v2, for the right price, I'd pull the trigger.

[Bluer2]

patiently waiting for version 4 here

[BzsBimmer]

Who’s in for V5? 🤣

[Anawaz]

Has anyone received V2 yet?

[DaytonaVioletM3]

Originally Posted by Anawaz

Has anyone received V2 yet?

Will have mine by next week and will keep everyone posted. All of the vendors appear to be sold out of V2 and wont have more until Jan.

[AtlantisF80]

The wiring harness of V1 sucks. The wires are too short and am having trouble tucking it in. Any solutions? Can you cut off the harness you don't need?